REPAIR AND MAINT OF PUMPS MOTOR STARTERS DOZER CHLORINATION PLANT CLEANING OF SUMP/OHT AND OTHER CONNECTED WORKS AND REPAIR AND MANT OF PIPELINES EXTERNAL WATER SUPPLY AND ALLIED WORKS AT JINDRAH UNDER GE (ARMY) DHAR ROAD

Amount

Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and not exc 1.5mtr depth and getting out for taking out CI Pipe lines, taking out/laying of CI/GI pipe lines forming bottom surfaces of excavtion to re-wired lines/gradient etc complete all as specified.

Returnning, filling in, intrenches including spreading, levelling, watering and well ramming in layers not exceeding 25cm all as specified & directed.

Removing surplus spoil to a distance not exc 50 mtr away and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in width not exceeding 30 cm in depth for passing of pipe line and making good of disturbed surface to match with the existing surfaces by using new material i.e bitumen, aggregate complete incl compaction of cutting portion and making good all as specified and directed

Taking out GI water tubing lines and connected unserviceable pipe and fitting includidng segregation of serviceable pipe and fittings and keep in safe custody and reuse serviceable pipe line and fitting from tranch/ in ground/under road /under PCC path etc the site of work complete all as specified and as directed of the following bore size :-

150 mm dia

100 mm dia

80 mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

Relaying/ refixing of old serviceable GI pipe and connection as obtained from item No 5 here-in-before with running GI fittings cleaning of pipe internally and externally comple all as specified and directed of the following bore sizes :- Note : New fitting (Medium grade) shall be provided

150 mm dia

100 mm dia

80 mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

M&L for GI water tubing medium grade and laid in trenches/floors/Walls with running fittings complete all as specified and directed of following sizes :-Make of GI Water Tubing medium grade - TATA/JINDAL/SURYA PRAKASH/BST., Make of GI FITTINGS- Only ISI marked Fittings.

150 mm dia

100 mm dia

80 mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed to following bore of size including dismantling of old GM gate valve (Make : Kilsokar/BIR/Zoloto)

80 mm dia

50 mm dia

40 mm dia

25 mm dia

20 mm dia

15 mm dia

Supply and fixing Digital water level indicator comprising micro controller IC ,buzzer for over flow indication suitable for digital water indicator micro processor based and Magnetic sensor suitable for micro processor based digital water level indicator fixed at different levels inside sump/ over head reservoir for sensing level of water.

PVC insulated copper conductor cable, 12 core x 0.6mm gauge, superior quality suitable for carrying signals from sensor to digital water level indicator of approved make including taking down existing un-serviceable cable all as specified and directed

M & L for preventive maintenance of 75 HP motor pump sets by cleaning stator, rotor and servicing of pumpsets by replacing old gland packing, greasing in bearings etc and preparation of old painted surface and applying one coat of painting, complete including dismantling/separating of motor from pump and rexing the same after servicing complete all as specified and as directed.

All as per item No.11 above but 50 HP pump set complete all as directed and specified.

All as per item No.11 above but 40 HP pump set complete all as directed and specified.

All as per item No.11 above but 30 HP pump set complete all as directed and specified.

All as per item No.11 above but 20 HP pump set complete all as directed.

All as per item No.11 above but 15 HP pump set complete.

All as per item No.11 above but 10 HP pump set complete.

All as per item No.11 above but 5HP pump set complete all as directed.

S&F water pressure meter (measuring in Bar/psi) with necessary cutting, fitting and fixtures and excavation as required, testing and commissioning, complete all as specfied and directed.

Material and labour for attending break down maintenance of pumping line CI/DI/MS upto 150 mm dia) from Booster/Tawi/Bansoo/Ghandeera/Post no-12 pump house at Jindrah to Distribution end (Adm Area/off mess/HQ Bldg/250 ORs/SWTs/Guard Posts/AC Plant/Fire station/Office under 1ASD abd 2ASD Etc) including necessary earth work to a depth not exceeding 2.0 meter wherever as required using JCB/ Manual according to the site condition and making good the distrubed surfaces / road cuttings by refilling and removing surplus soil to a distance complete all as directed and specified. (a) The contractor shall supply any kind of tools & machinery required for the completion of job. (b) Execution of work / attending break down may also occur in the civil area / road crossing. Therefore the quoted rate is deemed to be inclusive of any precautionery measures while working on public places and strict adherence to the norm as applicables. (c) Any kind of CI/DI/MS Pipe line upto 150 mm, fittings or bends shall be measured and paid not separately.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of brunt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 50 HP from Ghandeerah pump house complete all as specified and directed by Engr -in- Charge.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of brunt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 15 to 75 HP from Post 12 Pump house and BOOSTER complete all as specified and directed by Engr -in- Charge.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of brunt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 30HP from Tawi River Pump House complete all as specified and directed by Engr -in- Charge.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of brunt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 5 HP from SHED 103 and SHED 118 AC Plant complete all as specified and directed by Engr -in- Charge.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of brunt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 10 HP from Bansoo Pump House and Tawi River Pump House Plant complete all as specified and directed by Engr -in- Charge.

Note for (item 21 to 25) :- (a) Rewinding of motor will be measured and paid separately under relevent item. (b) The motor shall be squirrel cage induction/slipring induction motor. (c) The contractor shall reinstall the motor within one week after handing over for repairs failing which a penalty @ Rs. 1000/- per day of delay will be charged from the contractor. (d) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of motor duly functional and testing at its original location/position complete all as specified and directed. (e) Replacement of unserviceable bearings and greasing them completely. Bearing shall shall be measured and paid separately. (f) Motor shall be dismantled at workshop in presence of JE concern and inspected by the Engineer -in-Charge. A repair note shall be prepared by the contractor which shall be signed by contractor, JE, EIC and counter signed by GE. Winding cut shall be made in presence of EIC.

Taking down unserv motor and Rewinding the motor rotor with super enamelled copper winding wire/strip as per existing size and truns etc including all the insulating materials i.e varnish, cotton tape insulating paper and soldering etc of motor capacity 75 to 40 HP complete all as specified and directed by Engr-in-Charge.

Taking down unserv motor and Rewinding the motor rotor with super enamelled copper winding wire/strip as per existing size and truns etc including all the insulating materials i.e varnish, cotton tape insulating paper and soldering etc of motor capacity 30 to 15 HP complete all as specified and directed by Engr-in-Charge.

Taking down unserv motor and Rewinding the motor rotor with super enamelled copper winding wire/strip as per existing size and truns etc including all the insulating materials i.e varnish, cotton tape insulating paper and soldering etc of motor capacity 10 to 5 HP complete all as specified and directed by Engr-in-Charge.

Note for 26 to 28:- (a) Winding cut shall be made in presence of EIC and reassembling shall be done after inspection by the EIC. (b) Rewinding wire of motor will be measured and paid separately under relevent item. (c) The motor shall be squirrel cage induction/slipring induction motor.

M&L copper for Rewinding the motor stator with super enamelled copper winding wire of existing size and gauge and truns etc including all the insulating materials i.e varnish with suppr high quality of cotton tape, insulating paper and other misc items of motor any capacity all as specified and directed by Engr-in-Charge.

M&L for cleaning of semi under ground sump by scraping/removing all funges, scales, dust, sludge etc from inside of the semi under ground tank and depositing the same to a distance exc 50 mtrs and n.exc. 100 mtrs including washing the walls & bottom of the over head tank with water and disinfection chemical such as bleaching powder etc and writing date of cleaning, CA No and name of contractor with synthetic enamel black/white paint complete for upto 100000 gallons capacity complete all as specified and directed. (Kali Mata tank)

M&L for cleaning of under ground sump by scraping/removing all funges, scales, dust, sludge etc from inside of tank and depositing the same to a distance exc 50 mtrs and n.exc. 100 mtrs including washing the walls & bottom of the over head tank with water and disinfection chemical such as bleaching powder etc and writing date of cleaning, CA No and name of contractor with synthetic enamel black/white paint complete for 40000 Ltrs capacity complete all as specified and directed. (Gandira)

All as per item No 31 above but of capacity 35000 ltr (Location -Gandira water point)

All as per item No 31 above but of capacity 10000 Ltrs (Location Tawi river Pump House)

All as per item No 31 above but of capacity 5000 Ltrs (Location Bansoo Pump House)

All as per item No 31 above but of capacity 50000 Ltrs (Location Post No-12 pump house

All as per item No 31 above but of sedimentation tank capacity 30000 Ltrs (Location- Post no -12 Pump House )

All as per item No 31 above but of capacity 1,25,000 Ltrs (Location-Booster pump house)

All as per item No 31 above but of capacity 1,12,500 Ltrs (Location-Booster pump house)

All as per item No 31 above but of capacity 2,25,000 Ltrs (Location-Booster pump house clearifluctor tank)

All as per item No 31 above but of SMC Tank capacity 50000 Ltrs (Location-Bansoo pump and Ghandira Terra Top)

All as per item No 31 above but of SMC Tank capacity 30000 Ltrs (Location-Ghandira Terra Top)

All as per item No 31 above but of PVC Tank capacity 10000 Ltrs (Location- Ghandira Terra Top)

All as per item No 31 above but of Alum Chamber and Vessel Chamber (Location- Clarifoculator tank Booster)

Scrapping and Preparation and painting of surface of siluce valve/air valve/NRV any size 50 mm to 150 mm bore and applying one coat of synthetic enamel paint of black colour complete all as specified and directed by Engr-in-Charge

Supply and fixing in replacement of sets of bearings for 5 to 15 HP H.P motor of end carriage drive complete all as specified and directed.

All as per item No 45 above but bearing for 20 to 30 HP pump/motor

All as per item No 45 above but bearing for 40 to 75 HP pump/motor

Supply and fixing star rubber coupling. Make : Lovejoy L-190.

Supply and fixing Pump seal. Make : Champion.

Supply and fixing bearing sleeves.

Supply and fixing Round rubber coupling no 14-8

Overhauling and repairing and servicing for Impeller of suitable existing size made of brass/CI complete all as specified and directed at site by engr-in-charge.

Supply and fix in repairs gland bushing made of stainless steel suitable for 50 to 75 HP pump set, type-centrifugal etc complete all as specified and directed.

Supply and fix in repairs gland bushing made of stainless steel suitable for 40 to 30 HP pump set, ttype-centrifugal etc complete all as specified and directed.

Supply and fix in repairs gland bushing made of stainless steel suitable for 20 to 10 HP pump set ,type-centrifugal etc complete all as specified and directed.

Supply & fixing in replacement of old unserv starter by Automatic Star Delta starter consisiting of ampmetre,voltmetre,indicator lamp,ON/OFF push button,TP MCB etc suitable for motor pump set of capacity 75 H.P. including making all electric connection complete all as specified. Make - Havells Cosmic star / C&S/Bentex/ L&T/BCH or any make as approved by GE

Supply & fixing in replacement of old unserv starter by Automatic Star Delta starter consisiting of ampmetre,voltmetre,indicator lamp,ON/OFF push button,TP MCB etc suitable for motor pump set of capacity 50 H.P. including making all electric connection complete all as specified. Make - Havells Cosmic star / C&S/Bentex/ L&T/BCH or any make as approved by GE

Supply & fixing in replacement of old unserv starter by Automatic Star Delta starter consisiting of ampmetre,voltmetre,indicator lamp,ON/OFF push button,TP MCB etc suitable for motor pump set of capacity 10 H.P. including making all electric connection complete all as specified. Make - Havells Cosmic star / C&S/Bentex/ L&T/BCH or any make as approved by GE

Repair and Maint of automatinc star delta starter, decarbonised of all contects, relay,thimbles etc and cleaning, making good, tightning of all cables, wires and other connected items oiling in moving macnisiam etc incl replacement of burnt parts as requirment basis all as specified and directed for 75 starter complete all as specified and directed .

Repair and Maint of automatinc star delta starter, decarbonised of all contects, relay,thimbles etc and cleaning, making good, tightning of all cables, wires and other connected items oiling in moving macnisiam etc incl replacement of burnt parts as requirment basis all as specified and directed for 50HP starter complete all as specified and directed .

Repair and Maint of automatinc star delta starter, decarbonised of all contects, relay,thimbles etc and cleaning, making good, tightning of all cables, wires and other connected items oiling in moving macnisiam etc incl replacement of burnt parts as requirment basis all as specified and directed for 40 to15 HP starter complete all as specified and directed .

Supply only Flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 10 Sqmm , ISI marked and connected to pump motor through water tight sealing joints complete all as specified.

M&L for cleaning of semi under ground sump by scraping/removing all funges, scales, dust, sludge etc from inside of the semi under ground tank and depositing the same to a distance exc 50 mtrs and n.exc. 100 mtrs including washing the walls & bottom of the over head tank with water and disinfection chemical such as bleaching powder etc and writing date of cleaning, CA No and name of contractor with synthetic enamel black/white paint complete for 50000 gallons capacity complete all as specified and directed. (Kali Mata stand by tank)

Supply & Fixing in replacement of Single phase preventer for motor capacity 10HP

Supply & fixing in repair of digital panel mounted AC Amp meter, three phase in 96 x 96 mm square size, flush mounted case, accuracy class - 0.5 incl current transformer suitable size complete all as specified and directed .

Supply & fixing in repair of digital panel mounted AC Volt meter , three phase in 96 x 96 mm square size, flush mounted case, accuracy class - 0.5 complete all as specified and directed .

Servicing , repairing and over hauling of flaculator including replacement of chain and gear box including oiling greasing and making good as serviceable condition all as specified and directed ( Note :- repairing of flaculator for both tank sedimentation and pre sedimentation tank seperatly)

Servicing repairing and over hauling of slip ring for flaculator all as specified and directed.

Painting and Preparation of surface of steel section incl complete moving bridge and structure of clarifloculator tank and applying two coat after rubbing of rusted surface of synthetic enamel paint including marking all sign of requisite colour complete all as specified and directed by Engr-in-Charge

Repairing of clarifloculator rubber pading (wheel), bearing, chain, motor and overhauling complete and cleaning well maintained all as specified and directed Note rubber padding taken seperately

Replacement of rubber padding of clarifloculator all as specified and directed

Painting of pump motor set, pump etc of applying two coat of synthetic enamel paint after rubbing of rusted surface including marking all sign of requisite colour complete all as specified and directed by Engr-in-Charge

PCC (1:4:8) type D-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of motor, pump, header,in surface channel and Drains etc complete all as specified and directed.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of motor, pump, header etc complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of motor, pump, header ,Drain etc, including necessary form work complete all as specified and directed

M & L GI flange joint 150 mm bore 6/8 holes with rubber packing ring using suitable size nuts, bolts and washers, welding work complete to join two pipe all as specified and as directed .

All as per item No 76 but 100 mm dia

All as per item No 76 but 80 mm dia

S&F in replacement of double flanged Non return valve of size 150 mm bore including replacement of worn out rubbersheet nut, bolts and washers complete. Make- kirloskar/ upadhayay/ GDPA/BIR

S&F in replacement of double flanged Non return valve of size 100 mm bore including replacement of worn out rubbersheet nut, bolts and washers complete. Make- kirloskar/ upadhayay/ GDPA/BIR

S&F in replacement of Air release valve of size 150mm double flanged including taking down old unserviceable complete all as specified and directed. Make Kirlosker/Upadhaya/BIR

M/L for gland packing with suitable size to stuffing box of pump of any capacity and make the box leak proof complete all as specified.

M&L for cleaning of filter bed of MS tank and replacement of filter bed media from chamber at filteration plant jindrah including draining out muddy water from tank and removing all other foreign material like scales, sludges, slit etc and depositing where directed and cleaning tank by washing soda scrapping internal wall surface of water tank using hair brush and wooden blades , including changing of gravels by removing old utilised gravel complete all as directed by engr-in-charge. Note Gravels will be Paid Seperately

Material and labour for Fine Sand Gravel for Filter Bed at Booster Pump House complete all as directed by engr-in-charge.

Supply, installation, commissioning and testing in replacement of old unserviceable outdoor type LT panel(CPRI Approved) made out of 3.15 mm thick sheet metal, double door made out of MS angle iron base frame, cubical type floor mounted 3 Phase, 4 Wire, 415 Volts properly insulated aluminium bus bar - 04 Nos having capacity 400 amps on phase & neutral, dust and vermin proof, both side open with locking arrangement comprising of comprising of Digital meters with 3 lines of voltage, current and frequency and power factor of size 96x96 sqmm, suitable ratio CT, phase indicator-03 Sets, danger board plate, duly painted internally and externally with powder coated, fixing in position by provision of platform suitable size built with brick work in CM (1:4), 15 mm thick plastering in CM (1:6) and mounted on angle iron frame of ISA 75x75x6mm including glands, lugs, thimbles for all incomming and out going cable complete all as directed by the Engineer-in-Charge of suitable sizes for following :- Loc- Post-no 12 Pump House

Supply, installation, commissioning and testing in replacement of old unserviceable outdoor type LT panel(CPRI Approved) made out of 3.15 mm thick sheet metal, double door made out of MS angle iron base frame, cubical type floor mounted 3 Phase, 4 Wire, 415 Volts properly insulated aluminium bus bar - 04 Nos having capacity 200 amps on phase & neutral, dust and vermin proof, both side open with locking arrangement comprising of comprising of Digital meters with 3 lines of voltage, current and frequency and power factor of size 96x96 sqmm, suitable ratio CT, phase indicator-03 Sets, danger board plate, duly painted internally and externally with powder coated, fixing in position by provision of platform suitable size built with brick work in CM (1:4), 15 mm thick plastering in CM (1:6) and mounted on angle iron frame of ISA 75x75x6mm including glands, lugs, thimbles for all incomming and out going cable complete all as directed by the Engineer-in-Charge of suitable sizes for following :- Loc- Bansoo

Supply, installation, commissioning and testing in replacement of old unserviceable outdoor type LT panel(CPRI Approved) made out of 3.15 mm thick sheet metal, double door made out of MS angle iron base frame, cubical type floor mounted 3 Phase, 4 Wire, 415 Volts properly insulated aluminium bus bar - 04 Nos having capacity 400 amps on phase & neutral, dust and vermin proof, both side open with locking arrangement comprising of comprising of Digital meters with 3 lines of voltage, current of size 96x96 sqmm, suitable ratio CT, phase indicator-03 Sets, danger board plate, duly painted internally and externally with powder coated, fixing in position by provision of platform suitable size built with brick work in CM (1:4), 15 mm thick plastering in CM (1:6) and mounted on angle iron frame of ISA 75x75x6mm including glands, lugs, thimbles for all incomming and out going cable complete all as directed by the Engineer-in-Charge of suitable sizes for following :- Loc- Booster Pump House

Supply & Fixing ML - 3 Type three Pole Power contactor having 02 NC & 02 NO auxilary contacts, AC operated of coil voltage 230 Volt, 50 Hz AC 3 rating 40 A, ACI Rating 45A complete all as specified and directed.Cat no. SS90721 of Make - L&T or its equivalent in Havells/ Legrand/Schneider as approved by GE

Supply & Fixing ML - 4 Type three Pole Power contactor having 02 NC & 02 NO auxilary contacts, AC operated of coil voltage 230 /415 Volt, 50 Hz AC 3 rating 70 A, ACI Rating 100A Cat no. SS90910 of Make - L&T or its equivalent in Havells/ Legrand/Schneider as approved by GE

M&L for dismantling the PCC foundation through breaker/Hand Drill/Manually etc incl proper taking down the motor and pump alongwith channel, disconnecting the suction and delivery pipe. Note- PCC will be measured im seperated items

Material and labour for writing SM/MES no/Location etc on Pump and Motor Set, Generator, Header,and Date of cleaning on tank complete all as directed by the Engineer-in-Charge

Material and Labour for cleaning of Drain of (Width 0.5 mtr and Depth 0.8 mtr) from Drain Chamber at Booster to Drain Line near Shed complete all as directed by Engineer in Charge.

Demolition of cement concrete complete all as directed by Engineer in Charge.

Demolition of brick work complete all as directed by Engineer in Charge.

Material and labour for Brick Work with sub class B Bricks Straight or Curved or plan to any radius in cement mortar (1:4) for construction and repair of Drain.complete all as directed by Engineer in Charge.

Material and labour for Brick Work with sub class B Bricks (Except Brick) Straight or Curved or plan to any radius in cement mortar (1:4) for construction and repair of Drain.complete all as directed by Engineer in Charge.

Material and labour for plastering on fair faces of Brick Work with 15mm thick cement plaster (1:4) complete all as directed by Engineer in Charge. Note- WPC will be paid Seperately.

Material and Labour for cement concrete using type C-2 ( 1 : 3 :6) using 40mm graded aggregrate in surface channel and Drains

Supply only Integral Water Proofing Compound

S&F Angle iron guard rail of 600mm height welded with M.S Angle iron 60x60x6mm, MS flat 50x6mm for interlocking arrangements all as specified and directed.

M&L construction of brick masonery valve pits of size 600x600x600 mm internal dimension with brick work in cement mortar (1:4) including excavation and earth work, concrete work 3mm thick MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete and all as directed and including demolition of existing damaged valve pit and removing all as specified and as directed.

M&L construction of brick masonery valve pits of size1200x1200x1200mm internal diamension with brick work in cement mortar (1:4) including excavation and earth work, concrete work 3mm thick MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete and all as directed and including demolition of existing damaged valve pit and removing all as specified and as directed.

S&F in replacement of double flanged sluice valve of size 80 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete

S&F in replacement of double flanged sluice valve of size 150 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete

S&F in replacement of double flanged sluice valve of size 100 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete

S&F in replacement of double flanged sluice valve of size 50 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete

Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

Supply and fix in replacement of GI Union of size 15 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 20 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 25 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 40 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 80 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 100 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow of size 15 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow of size 20 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow of size 25 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow of size 40 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow of size 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow of size 80 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 15 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 20 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 25 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 40 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 80 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 100 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 15mm x 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 15mm x 100 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 15mm x 150 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 20mm x 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 20mm x 100 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 20mm x 150 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 25mm x 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 25mm x 100 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee of size 15mm x 15mm x 15mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee of size 20mm x 20mm x 20mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee of size 25mm x 25mm x 25mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 20 mm x 15mm x 20 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 25 mm x 15mm x 25 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 25 mm x 20mm x 25 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 20 mm x 25mm x 20 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 15 mm x 20mm x 15 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 40 mm x 20mm x 40 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 40 mm x 25mm x 40 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 50 mm x 20mm x 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 50 mm x 25mm x 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Tee Reducer of size 50 mm x 15mm x 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow reducer of size 50 mm x 25mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow reducer of size 50 mm x 20mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow reducer of size 50 mm x 15mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow reducer of size 40 mm x 15mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow reducer of size 40 mm x 20mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow reducer of size 40 mm x 25mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow reducer of size 25 mm x 15mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow reducer of size 25 mm x 20mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow reducer of size 20 mm x 15mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket reducer of size 50 mm x 25mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket reducer of size 50 mm x 20mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket reducer of size 40 mm x 15mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket reducer of size 40 mm x 20mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket reducer of size 40 mm x 25mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket reducer of size 25 mm x 20mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket reducer of size 25 mm x 15mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket reducer of size 20 mm x 15mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Material and labour for Brick Work with sub class B Bricks Straight or Curved or plan to any radius in cement mortar (1:4) for construction/ repair of Drain/Gully Trap.complete all as directed by Engineer in Charge.

Material and Labour required for making hole in RCC roof for passing Pipe line and refilling the same with Cement Concrete (1:2:4) type B-1 using 20mm graded aggregate complete all as directed by Engineer in Charge.

LUXMI ELECTRONIC WORKS

MandeepConstructionCo

K S BUILDERS

DAVINDER SINGH

PAWAN KUMAR GOVT. CONTRACTORS