Construction of Breeder Shed 7500 Sq Ft Kid Shed 2000 Sq Ft Sick Animal Shed 500 Sq Ft and Feed Mill Godown 1500 Sq Ft

Civil

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc., complete. (Lift upto 1.5m) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc., complete. (Lift upto 1.50m) By Mechanical Means

Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc., complete. With fine aggregate (Crushed sand VSI Grade)

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces and watering etc.complete.

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete

Providing second class Burnt Brick masonry with conventional /IS type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc., complete

Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15cm to 20cm including watering and compaction etc.complete.

Providing internal cement plaster 20mm thick in Single coats in cement mortar1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc., complete.

Providing flush grooved pointing with cement mortar 1:3 for brick work including scaffolding and curing etc. complete

Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc., complete.With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C.chajja as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided & curing etc., complete (Excluding reinforcement & structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc., complete.With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc., as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and laying cement concrete flooring 40mm thick with M20 cement concrete laid to proper level and slope in alternate bays, including compaction, filling joints, marking lines to give appearance of tiles of 30cm x 30cm or other size laid diagonally / square etc., finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed sand VSI Grade

Providing and laying 100mm dia. half round white glazed earthen ware pipes in 1:5:10 cement concrete bedding including bends, etc. complete.

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete (Weight of 5.5Kilogram/sq.m.).

Providing and fixing plain zinc sheeting of 0.80mm thick (22B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete. (Weight of 6.8Kilogram/sq.m.).

Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6mm dia. bars 3Nos. and stirrups @ 250mm c/c and fixing in wall with 6Nos of holdfast of 12mm dia bars500mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .

Providing and fixing M.S. grill door 24 Kilogram / One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings & 3 coats of oil painting etc., complete

Providing and fixing welded mesh of 11gauge wires having mesh size 50mm x 25mm including M.S Angle frame of size 35mm x 35mm x 5mm in position with oil painting 3 coats etc. complete

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements, M.S. Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of MS sheet not less than 0.9mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S.62481979) (Without mechanical gear)

Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.)

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

a) Providing, laying and fixing P.V.C. pipe of 20mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete including removing existing pipeline if necessary and conveying and stacking the same as directed etc. complete.

c) Providing and fixing 20mm dia. Screw down bib/stop tap of brass including necessary socket union nut complete.

Eletrification portion

Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing & required accessories as per specification.

Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification

Wiring for plug on board with Flush Switch socket, copper wiring and earthing as per specification

Supplying & erecting mains with 2 x 1.5 Sqmm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification

Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing , having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3Years warranty as per specification

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways /phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification

Testing

CEMENT : Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness

AGREEGATE: Water Absorption, Specific Gravity,Impact Value, Crushing Value, Sieve Analysis., Abrasion Value, Flakiness Index & Elongation Index, Stripping Value, Soundness

SAND : Fineness Modulus ( Sieve Analysis ),Silt & Clay Content, Chloride & Sulphate Content, Silt Factor

BRICKS: Water Absorption, Compressive Strength, Efflorescence

CONCRETE: Compressive Strength of CC Cube

STONE/ RUBBLE: Crushing Value/Compressive Strength, Water Absorption & Specific Gravity,

STEEL BAR : Tensile strength, % of Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress

Shed Royalty

a) For sand

b) For All Other Minerals

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social,Health and Safety (ESHS) risks and SHS Code of Conduct

Please Enable Macros to View BoQ information