Contruction of Forest Rest House at Gharbasra

Amount

Excavation in foundation trenches etc in earth work, lift upto 1.5 mtr stacking the excavated soil not more then 3mtr. clean from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinths sides of foundations etc. consoiliding each deposited layer by ramming as watering and then disposing of all surplus excavted earth as directed with in all leads of 20mtrs Pick work / jumper work.

Filling in plinth with sand under floor i.e centering reamming and consolidating complete.

Excavation in earth work and filling in 15cm layer in foundation and plinth including ramming , Watering and Consolidating upto a lead of 20 mtr. And lift upto 1.50 mtrs in pick work

Providing and laying cement concrete 1:4:8 ( 1 Cement :4 Sand: 8 graded Stone agregated 40 mm nominal size) and curing complete excluding cost of form work in:- Foundation and plinth

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. For all height of propping and centring below supporting floor to ceiling not exceedingg 4mtr and removal of samee for in situ reinforced concrete and plain concrete work in:-

Foundation, footing, bases of columns etc and the like in mass concrete

Columns, pillar, post and struts square, rectangular or polygonal in plan.

Beams, cantilevers, girders and lintels:Sides and soffits of beam haunching cantilever, girder, bressumers and lintels not exceeding 1.00 meter depth in all heights from floor.

Flat Surface such as soffit of the suspended floor roofs, landing, shelves and the like floor etc upto 200mm thickness .

Edge of slabs and breaks in floors and walls under 20cm wide

Staircases with sloing or stepping soffits excluding Landing .

Providing and laying cement concrete 1:6:12 ( 1 Cement :6 Sand: 12 Stone agregate 40 mm nominal size) and curing complete excluding cost of form work in:- Foundation and plinth

Providing and laying cement concrete 1:4:8 ( 1 Cement :4 Sand: 8 Stone agregate 40 mm nominal size) and curing complete excluding cost of form work work in:- Foundation and plinth

Providing and laying cement concrete 1:1.5:3 ( 1 Cement :1.5 Sand: 3 Stone agregate 40 mm nominal size) and curing complete excluding cost of form work work in:-

Foundation, footing, bases of columns etc and the like in mass cement .

Columns, piller posts and struts upto floor two level

Suspended floor, roof, landing ,Shelves and their supports balconies beams, gitders, breassumers and cantilivers upto all floor two level

Providing and laying cement concrete 1:2:4 ( 1 Cement :2 Sand: 4 Stone agregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement or reinforced concrete work in :-

Staircases( Except spiral stair cases ) excluding Landing .but incl.. Preparing of the surfaces and finishing of nosing upto floor two level

Providing and laying cement concrete 1:2:4 ( 1 Cement :2 Sand: 4 Stone agregate 20 mm nominal size) reinforced concrete chajjas not exceeding 10 cm thickness upto floor two level incl..finishing the exposed surfaces with cement mortal 1:3 ( 1 cement :3 sand) to give a smooth and even surfaces centering /Form work and a curing complete and curing complete excluding cost of reinforcement.

Providing tor steel reinforcement for RCC Work inc.. Bending, binding and placing in position complete upto all level/heights.

Second class Brick work using common brunt clay building bricks in Super structure above plinth level upto all floor height in cement mortar 1:6( 1Cement:6Sand)

Half Brick masonry in common brunt clay building bricks in Super structure above plinth level upto all floor height in cement mortar 1:4( 1Cement:4Sand)

15mm thick cement plaster in single coat on rough side of brick concrete wall for interior plastering upto all floor level including arrises, rounded angles, chamfers and rounded angles not excluding 80mm in girth and finished even in and smooth in cement mortar1:6(1 cement:6 sand) and curing complete.

15mm thick cement plaster in single coat on fair side of brick concrete wall for interior plastering upto all floor level including arrises, rounded angles, chamfers and rounded angles not excluding 80mm in girth and finished even in and smooth in cement mortar1:6(1 cement:6 sand) and curing complete.

6 mm cement plaster to ceiling in cement mortar 1:3 (1 cement:3 sand)

white washing with line on undercorated wall surface ( two Coats ) to give an even shade including throughly brooming the surface to remove all dust mortar and other foreign material.

Distempering (Two coats) with oilbound washable distemper or approved brand and Manufactures and pf required shade on undercorated wall surface to give an even shade over and inc.. Brushing the surface and other foreign matter and also including preparing the surface even and prepared smooth

Wall painting ( two coats) with plastic emulsion paint of approved brand manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping s and other foreign matter and sand papred smooth including applying a putty a required for making the surface. paint of NCL Altek of approved shade above dado/skirting

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 cement:3sand: 6 graded stone aggregated 20mm nominal size) including finishing the top surface concrete smooth.

Providing and laying duty precast cement concrete inter locking paver block vibro compacted upto M-50 grade including broder or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness etc

Precast terrazzo tiles 20mm thick with marble chips of specified size laid in floor, treads of steps and landing on a bed of 25mm average thickness of cement mortar1:6 (1 cement:6sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including complete with tiles of following shades: Silver Grey

Precast terrazzo tiles 20mm thick with marble chips of specified size in skirting and rises of step not exceeding 30cm in height on 10 mm thick cement plaster1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete with tiles of following shades: Silver Grey

Providing and fixing 10mm thick anti skid water proof stain and impact resistant heavy duty vertified tiles Nitro or equivalent 600x600x10mm manufactureed of approved shade and colourin, treds of steps and landings. Laid over 12mm thick cement mortar1:3 (1 cement : 3 sand)jointed with neat cement slurry mixed pigment to match the shade of tiles as required complete.

Ground floor

First Floor

Providing and laying spartic ceramic tiles 5.5 mm thick in flooring (300x300mm) size treads of steps made on abed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) finished with flush pointing in while cement

Ground floor

First Floor

Kota stone slab 25mm in risers of steps, skirting dado and pillers laids on 12mm ( average) thick cement mortar 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed pigment to match the shade of slab including rubbing and polishing as required complete. White marble band as per detail

Ground floor

Providing and laying Duro stone vertified tiles (300x300x10mm) in grey/coloured or of approved shade in flooring ,treads of steps and landing laid on a bed of 12m thick cement mortar1:3 (1 cement : 3 sand) laid over and jointed with flush pointing in white cement mixed pigment to match the shade of tiles complete. ( Checkered tiles)

Ground floor

Providing and laying heavy duty precast cement concrete inter locking paver block vibro compacted upto M-50 grade including border or kurb block grey thick average thickness of cement mortar 1:4 ( 1 cement : 4 sand ) laid over and jointed with neat cement slurry mixed including curing rubbing & polishing complete ( Sub-base concrete floor to be paid for seperatly 40mm thick inter locking blocks.

Providing and fixing Double rebate steel windows side hung top hung and fixed glazed and gauged of standard rolled steel section joints mitered and welded with manufactured relevent ISI standard specification with 16x3.15mm lugs 10cm long embedded in c.c block 15x10x10cm of size in c.c 1:3:6m( 1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size ) with wooden/steel plugs screws of rawl plug with fixing of projecting lugs and handles pre staged bolting and fixing 4mm thick glass panes with sash putty for glazed windows or wire gauge of IS designation 85G with metal beading complete and frame with ISL 75mmx40mm including priming coat of lead paint or as directed by Engineer in charge complete.

Providing and fixing factory made door frame (Ever door) 6.25x12.5cm to receive factory made ever door shutter conforming to IS - 4020 - 1994 standard. For Single Leaf

Providing and fixing factory made door frame (Ever door) single leaf rigid GRP sandwish comsite solid type door shutter, 35mm thick laminated with two GRP skins, of minimum of 1.5mm thickness with wooden reinforcement of seasoned sal wood/hard wood block of core section 30x33 mm with necessary reinforcements for fixing material fitting such as tower bolts, aldrops, knob etc. confroming to IS - 4020 - 1994 standard.

Single Leaf

Providing and fixing MS grills of required pattern in wooden frames of windows with MS flats, square cut or rounded bars with round headed bolts and nuts or by screws

a) Plain Grill

(b)Ornamental Grill

Providing and fixing 19mm thick proof termite resistant commercial board ( Box type ) including shelves andshutters. Backside of cupboard shall be of 8mm thick ply. All cut portion of the shelves and the shutters of cupboard from all side to be finished with hard wood edging.

Applying priming coat cover new steel and other metal surface after and including preparing the surface by throughly cleaning oil grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers paint brushing red lead, red oxide/zinc oxide chrome.

Painting two coat ( excluding priming coat ) on new steel and other metal surface all dirt dust and other forign matter: with ready-mixed paint other than white.

Providing in RCC smooth finishing of the exposed surface with cement 1:3 ( 1cement : 3 sand )

Painting top of roofs with bitumens of approved quality@ 17kg pr 10 sqm impregnated with cost of sand at 60m per 10sqm including cleaning the slab surface with brushesand finally with a piece of cloth lightly soaked in kerosene oil complete. With residual type petrolium bitumen of penetration 80/100

Providing and laying brick tiles over munty roof grouted with cement mortar 1:3 ( 1 cement : 3 sand ) over a 12mm layer of cement mortar 1:3 ( 1 cement : 3 sand ) and finished neat and phuska in tile tarraccing on bitumen painted roof 25mm thick mud plaster with chopped laid over 75mm thk. rammed earth laid complete in all respect.

Constructing course rubble hammer dressed U shape open surface drain with side walls 15x23cm in cement mortar 1:6 ( 1 cement : 6 sand ) and inside plastering with cement plaster 1:3 ( 1 cement : 3 sand ) including earth work laying 1cms cement concrete in 1:5:10 ( 1 cement : 5 sand : 10 graded stone aggregates of 40mm nominal size ). 75mm cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregates of 20mm nominal size ). Front&Back L.H.S. & R.H.S.

Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregates of 20mm nominal size ) finished with 12mm cement plaster 1:3 ( 1 cement : 3 sand ) and a coat of neat cement rounding the outlet complete. Khurras

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade and screws etc. complete.

Providing and fixing anodized aluminium tower bolts (barrel type) anodized from frong or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing anodized aluminium handles transparent anodized from front or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing oxidised M.S.hooks and eyes 200mm

Providing and fixing bright finished hasp and staple 115mm For Cup board

Cupboard

Providing and fixing on wall face C.I sheets to rain water pipes including filling the joints with spum yarn soaked in neat cement slurry and cement motar 1:2 ( 1 cement : 2 sand)

100mm dia pipe.

Providing and fixing M.S. holding bat clamps of approved design to C.I. or S.C.I. pipe including cement contrete block 10x10x10cms of 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregates of 20mm nominal size ) and cost cutting holes and making good the walls accessories for 100mm diameter.

Providing and fixing on wall face C.I accessories to rain water pipes including filling the joints with spum yarn soaked in neat cement slurry and cement motar 1:2( 1 cement : 2 sand)

(a) C.I Plain Bend 100mm dia pipe.

(b) C.I Plain shoes Bend 100mm dia pipe

Providing and fixing 85cm high rail having baluster of 19mmx19mm size and 12mm x 12mm MS solid square bars in combination with MS flat of 40mmx5mm size with PVC hand rail baluster dully welded/joining with electric gas welding with top MS Flat.

Providing and fixing 50mm dia M.S. pipe hand rail slip resistant with round end two level i.e. 75cm and 90cm height and extend 30cm beyond the top and bottom of the ramp and 25mm dia M.S. pipe baluster welded to 50mm dia MS pipe embedded in cement concrete 1:3:6 ( 1 cement : 3 sand : 6 graded stone aggregates of 20mm nominal size ) For handicaped Ramp Rail

Providing and laying upto first level reinforced cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregates of 20mm nominal size ) to give smooth and even surface including centering and shuttering etc. but excluding cost of reinforcement in : String course, coping, bed plates,/anchor block window sills and the like.

devender rana

Arpit Prashar

Ram Gopal Saini