PROVN OF BLACK TOP (APPX 150 M) FROM MAIN ROAD TO CSD UIFOS BLDG AND OR DINING HALL OF 31 ARTY BDE CAMP TAGORE LINES, JHANSI CANTT UNDER GE JHANSI

Amount

Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

Rolling and consolidating road formation surface in cutting with 8- 10 tone including filling in hollows and depression which occur during the process of rolling, complete as specified and directed.

M&L for 200 mm thick (spread thickness) soling with broken boulders or quarried stone 80mm to 40mm size itersticks filled, surace formed, rolled and consolidated wth 8 to 10 tone power roller to required gradient & camber complete all as specified and directed.

M&l for 150mm thick (compacted thickness) WBM complete laid in two separate layer of 75mm compacted thickness with coarse aggregates of grading 2 (63 to 40mm size) for 1st layer and grading 3 (50 to 20mm size) for second layer (surface of each layer will be binded with screening and moorum, watered, consolidated and compacted separately) , spread, rolled and consolidated to required gradient and camber using granite trap or basalt stone with 8 to10 tone power roller complete all as specified and directed

M&L top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc, applying evenly priming/tack coat with bituminous primer at 10 kg per 10 sqm using paving bitumen VG 10, complete all as specified and directed.

M&L laying premix bituminous, macadam with paving bitumen VG 30,as 4% of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.

M&L preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc, applying evenlya priming/tack coat with bituminous primer at 5 kg per 10 sqm using paving bitumen VG 10,laying bituminous premix asphaltic semidense concrete 40 mm consolidated thickness with 5.5% binder content VG 30 by weight at total mix, and by using hot mix process and laid by Mechanical paver roller and compacted with 8 to 12 Ton power roller to required camber and gradient for uniform,smooth surface complete all as specified & directed.

M&L for moorum/red bajri brought from out side MD land, filling in layers not exceeding 7.5cm thick, spread watered and rolled with 8 to 10 tonne power roller to existing camber and gradient, complete all as specified and directed.

S&F of CAT EYE (Road stud) made of poly-carbonate moulded body with electronically welded prismatic retro-reflective lens on both sides for maximum retro reflection in wet and dry condition to be fixed with epoxy chemical cement and hardner (bituminous adhesive BT-69) complete all as specified and directed.by Enge in charge. Make :-Tata BP/Dark eye/3M india Ltd

M&L for preparation of black bituminious road surface and applying thermo plastic center or edge line road marking paint (reflective type) of 2 mm thickness of uniform finishing with machine at temperature 160 C laid uniform width conformiong to BS 3262 (Part-I&II) of 1989 read with most specification of 803 clause 4.2.1 and 4.2.2 on bituminous surface in white/yellow/red colour and super imposed with glass slam beats confirming to BS 6088 and most specification 803 clause 4.3.3 including cleaning of surface by removing all dust, dirt oil grease etc inclduing removing of existing marking with spirit/keroscene/gas burner or mechanically on bituminous surface complete all as specified and directed.

S&F Solar road stud of size125x125x25mm made out of toughened aluminium alloy body with polycarbonate top cover,IP-65 protection against water ingress, having 03 No super bright LEDs on each side coloured reflective LED Coverinbuilt rechargeble battery,solar panel visibility upto 600mtr automatically turns on at night and turns off dawn, flashing for min 3daysonce fully charged, suitable for night & adverse weather condition and fixed with epoxy chemical cement and hardner (bituminous adhesive BT-69) complete all as specified and directedby Enge in charge. Make :- Tata BP/Dark eye/3M india Ltd

Stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and directed.

HARNAM SINGH ANIL SINGH