Constn. of New Link Road F.F. Road (Baghe Ke Uttar) to F.F. Road (Amir Khas) (along canal) Bye Pass, Length 8.50 Km. (Shaheed Udham Singh Marg), Length 8.50 Km. Market Committee Jalalabad, Assembly Constituency Jalalabad, Distt. Fazilka

Dismantling of exsiting old brick on edging CSR (8.5 i)

Dismentling of cement concrete road complete in all respect as per PWD specification.(CSR 8.6d )

Excavation in soil (any type) using hydraulic excavator CK 90. Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections including all lifts and combined lead upto 60m. 6.19

Compaction of earth work & preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to given level, camber, watering, rolling with road roller compacting the bed to achieve minimum dry density as given in Table 300-2 as per technical clause 305 of MORT&H specifications. 24.5c

Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications (24.5 (a)

Construction of granular sub-base by providing material, spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,

Scarifying the existing Bituminous road surface to a depth of 50mm and disposal of scarified material with in all lifts and lead upto 1000 meters (CSR 24.3 b)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications (24.13)

Providing and applying primer coat with bitumen emulsion SS on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85kg/ sqm complete as per technical clause 502 of MORT&H specifications (24.15)

Providing and applying tack coat with bitumen emulsion RS1 using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface /granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications (24.16 (a)