REPAIR AND PAINTING OF STEEL/WOODEN FURNITURE FD/MAP OF VARIOUS LODGER UNITS 1BRD 4 BRD 29 ED 3 ASC 6 LU AND 4 PSU AT 402 AFS CAHKERI KANPUR

Amount

Almirah large steel with shelves( FD 1031) :- Taking out existing unserviceable locks from almirah large steel and S&F of new locks of six levers of existing shape & size with duplicate keys complete all as specified and directed.

Taking out broken/damaged handle of almirah large steel and S&F of new handle of mild steel chromium plated of existing shape all as specified and directed.

Taking down existing unserviceable shelves of almirah large steel and S&F of new shelves made of 1mm thick mild steel of existing shape and size complete all as specified, shown on drawing and directed.

Taking out old unserviceable door hinges from almirah large steel and S&F of new door hinges mild steel 75/80 mm long complete all as specified and directed.

Taking down unserviceable locking device & rod set from almirah large steel and S&F of new locking device & rod set of existing shape and size complete all as specified on drawing and directed.

Dismantling of unserviceable legs of almirah large steel and S&F of new leg made of 1mm thick mild steel sheet of existing shape and size complete all as specified on drawing and directed

M&L for painting to of Almirah large steel by spraying on both side (outer and inner surfaces) including legs, door shutter, partition,drawers and shelves with one coat of OG synthetic enamel paint (Ist quality) including preparation of old painted surfaces & applying ready made putty wherever required to fill up the cavities complete all as specified and as directed .

Almirah med steel with shelves( FD- 1032) :-Taking out existing unserviceable locks almirah medium steel and S&F of new locks of six levers of existing shape & size with duplicate keys of complete all as specified and directed.

Taking out broken/damaged handle of almirah med steel and S&F of new handle of mild steel chromium plated of existing shape all as specified and directed.

Taking down existing unserviceable shelves of almirah med steel and S&F of new shelves made of 1mm thick mild steel of existing shape and size complete all as specified on drawing and directed.

Taking out old unserviceabledoor hinges from almirah medium steel and S&F of new doorhinges mild steel 75/80 mm long complete all as specified and directed.

Taking down unserviceable locking device & rod set from almirah large steel and S&F of new locking device & rod set of existing shape and size complete all as specified on drawing and directed.

Dismantling of unserviceable legs of almirah med steel and S&F of new made of 1mm thick mild steel sheet of existing shape and size complete all as specified on drawing and directed.

M&L for painting to the almirah med steel by spraying on both side (outer and inner surfaces) including legs, door shutter, partition,drawers and shelves with one coat of OG synthetic enamel paint (2nd grade quality) including preparation of old painted surfaces & applying ready made putty wherever required to fill up the cavities complete all as specified and as directed and shown on drg .

Table Office Officer steel(FD 1003):- Removing old u/s top of table office officer steel and S&F of new top of Pre- laminated MDF board 18 mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified and directed.

Taking out U/S drawer of table office officer steel and S&F new drawer made of 1mm thick MS sheet ,rest all as per drg and directed by Engr –in-charge.

Removing U/S damaged legs and S & F New leg made of MS Sheet 1.6mm thick, 25mm square conduit pipe all as per drg and directed by Engr-in-Charge

Removing of U/S shoe and S&F new PVC hard shoes to table office officer steel all as directed by Engr-in-Charge

Taking out U/S locks from the drawers/mobile padestal unit of Table officer/executive make Godrej/Fetherlite/methodex any other make any shape and any size and S&F new lock as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Taking out U/S telescopic channel from the drawers/mobile padestal unit of Table officer/executive make Godrej/Fetherlite/methodex any other make any shape and any size and S&F new channel as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Taking out unserviceable locks from table office officer steel and S&F of new locks matching with existing shape & size with duplicate key as approved by GE/Engr-In-Chare.

M & L for Painting of Table office officer steel with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with adhsice cloth of Table office officer steel complete all as specified in drg and directed by Engr-in-Charge .

Table office Clk steel(FD 1004):- Removing old u/s top of table office clk steel and S&F of new top of Pre- laminated MDF board 18 mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified and directed.

Taking out U/S drawer of table office clk steel and S&F new drawer made of 1mm thick MS sheet ,rest all as per drg and directed by Engr –in-charge..

Removing U/S damaged legs and S & F New leg made of MS sheet 1.6mm thick 25mm square conduit pipe all as per drg and directed by Engr-in-Charge.

Removing of U/S shoe and S&F new PVC hard shoes to table office clk steel all as directed by Engr-in-Charge

Taking out unserviceable locks from table office clk steel and S&F of new locks matching with existing shape & size with duplicate key as approved by GE/Engr-In-Chare.

M & L for Painting of Table office clk steel with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with adhsice cloth of Table office clk steel complete all as specified in drg and directed by Engr-in-Charge.

Repair to table 900x600x760mm with /without drawer steel (FD 1008 &1007):- M&L for repairs to table 900x600x760mm with/without drawer steel by welding of conduit frame whenever required including strengthening etc removing old/unsv worn out existing top and S&F new top of 18/19mm thick pre-laminated MDF board,exterior grade one side teak finish and other side white including with 4mm thick Ist class Hard Wood Sheesham beading all round the top fixed with suitable size of screws complete all as specified and directed by Engr-in-Charge.

Removing U/S damaged legs and S & F New leg made of MS Sheet 1.6mm thick 25 mm square conduit pipe all as per drg and directed by Engr-in-Charge

All as per item No 5.01 here in before but short rail.

All as per item No 5.01 here in before but long rail.

Removing of unserviceable drawer of table 900x600 with drawer steel and S & F New drawer same shape and size. Rest all as per drg and directed by Engr-in-Charge

All as per item No 5.01 here in before but stiffener.

Removing old unsv rubber shoes and S&F new rubber shoes in each table complete all as specified and directed by Engr-in-Charge.

M & L for Painting of table steel 900x600x760mm with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with adhsice cloth of table steel 900x600x760mm complete all as specified in drg and directed by Engr-in-Charge

Table Steel 900x900x760mm(FD 1009 & TP) Taking out old U/S existing top from Table Steel (900 x900x760 mm) and S&F of new top made of 18 mm thick Pre - laminated MDF board exterior grade with 4 mm thick teak wood beading around the top complete all as specified and directed

S & F of 25 mm Square MS tube 1.6 mm thick 1100 mm long cross stiffener to table dining 900x900x760 mm steel 8” (inch) below from top frame by welding Rest all as directed by Engr-in-Charge.

Removing of U/S PVC Leg Shoes of Table Steel 900x900x760 mm and S&F of new PVC legs shoes of the same shape and size Rest all as per drg and directed by Engr-in-Charge

M & L for Painting of table steel 900x900x760mm with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with adhsice cloth of table steel 900x900x760mm complete all as specified in drg and directed by Engr-in-Charge

Chair CBA Steel /CBB Steel( FD 75(M): Removing of old existing U/S seat & back of chair CBA/CBB Steel and S&F new seats/back of seasoned sheesham wood duly Canned with ½ round plastic cane 2mm wide, 0.4mm thick and border with 3.5mm wide, 0.5mm thick for chair CBA /CBB steel all as specified and as shown on drg.

S&F new mild steel cleats of size 50 X 25 X3 mm in replacement of old U/S cleats by welding to the frame complete of Chair CBA/CBB steel all as specified and as directed by Engr-in-Charge

Removing of old existing U/S cap and S&F new PVC cap for chair steel tumbler with arms.

Removing of U/S shoe and S&F new hard rubber shoes to chair steel tubler with arms with appropriate steel screw all as directed by Engr-in-Charge

Removing of old U/S arms and S&F new arms seasoned sheesham wood with steel screw appropriate size complete of Chair CBA steel with Arms as specified and shown on drg all as directed by Engr-in-Charge

M & L for Painting of Chair CBA steel /CBB Steel with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with adhsice cloth of Chair CBA steel /CBB Steel complete all as specified in drg and directed by Engr-in-Charge

Table Computer (TP):- Taking out the old existing unservicable following parts of computer table Supply & Fixing new parts of the same complete with the help of appropriate nuts, bolts and washers and as directed by Engr-in-charge:-

Shelf

Drawer

Key board with slider

Caster Wheel

Chair computer (TP):- Taking out the old existing unservicable following parts of chair computer (TP) and S&F new parts of the same complete with the help of appropriate nuts, bolts and washers and as directed by Engr-in-charge

Seat & Back

Coaster wheel

Chair revolving office officers high back/executive with PU arm (TP) :-Taking out U/S caster wheel from any type of chair revolving high back executive and S&F new caster wheel of different type as per trade pattern matching with the existing shape & size.as approved by Engr-in-charge

Taking out U/S tapestry/fabric cloth from seat & back of chair revolving high back executive and S&F new tapestry/fabric cloth of approved quality & shade including replacement of foam cushion and plywood etc.all as directed by Engr-in-charge

Taking out U/S hand rest from chair revolving high back executive and S&F new hand rest of different type as per trade pattern matching with the existing hand rest.all as directed by Engr-in-charge

Taking out of Hydrualic Assembly from Chair revolving office officer High back/executive and S&F new Hydrualic assembly different type as per trade pattern with the existing shape and size as directed by Engr-in-charge

Charpoy GI Pipe ply top (FD 220):- Removing of unserviceable long rails from Charpoy GI Pipe and S & F new long rail made out of 32mm dia GI pipe medium grade, complete all as specified shown on drawing and directed by Engineer-in-Charge

Removing of unserviceable short rails from charpoy GI pipe & making of two short rails from long rail obtained from execution and fixing the same in charpoy including cutting threads on both ends, complete all as specified shown on drawing and directed by Engineer-in-Charge.

Removing of unserviceable legs from charpoy GI pipe & making two legs from short rails obtained from execution and fixing the same in charpoy including cutting , threading on one end and S&F clamps as per drawing for FMN set, complete all as specified shown on drawing and directed by Engineer-in- Charge.

Removing old unserviceable 3 way GI elbow and S&F new three way elbow of 32 mm dia, ISI marked med grade, complete all as specified shown on drawings and as directed.

Removing old unserviceable GI check nut and S&F new GI check nuts of 32 mm dia 6mm thick ISI marked complete all as specified shown on drawings and as directed.

Removing of existing Ply top 12 mm BWR from GI charpoy ply top and tightening the frame, loose laying charpoys components i.e. check nuts, elbows, rails, legs etc and S&F 2000x900x12mm thick ply wood BWR, as directed including 10 Nos nuts bolt (GI) 75mm long 6mm dia with washer and painting of flat iron complete all as specified shown on drawings and as directed.

M&L for welding of broken steel parts of various steel furniture by electric welding & welding up to 25mm consider a single point as and where required as specified and directed by Engr-in-charge

Sofa set 5 seated /sofaset 4 seated :- Taking out old U/s Broken front leg from Sofa set 5 Seated and S & F New leg to be made of seasoned sheesham wood same shape and size as specified and directed by Engr –in-Charge

All as per Item No.12 above but rear leg

All as per Item No.12 above but Arms

All as per Item No. 12 above but Batten

Replacing of existing old cushion foam size 22”x21”x4” from seat and back of Sofa set and supply and fixing of new cushion foam 22”x21”x4” (U Foam) 32 density of sleep well/ curlon/cool foam & covered with cloth tapestry as per sample Kept in Furniture Yard approved by GE (Cost of tapestry cloth not less than Rs 240/- per meters) all as specified and directed by Engr-in-Charge.

Book case (FD 234) :-Taking out old U/S front single door of book case and S&F new door made of 18mm thick prelaminated MDF board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed.

Taking out old U/S side of book case and S&F new side made of 18mm thick prelaminated MDF board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing and directed.

Taking out old U/S back portion plywood of book case and S&F of new plywood 6mm thick, BWR grade, commercial all as specified on drawing and directed.

Taking out old U/S top board of book case and S&F new top board made of 18mm thick prelaminated MDF board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed.

Taking out old U/S bottom portion board of book case and S&F of new bottom board made of 18mm thick, prelaminated MDF board, extrerior garde both face white laminated complete all as specified on drawing and directed .

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

Table Writing (FD 249 ) :- Taking out old U/S top of table writing and S&F new top of 18mm thick prelaminated MDF board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out old U/S stiffner of table writing and S&F new Stiffener made of seasoned sheesham wood as per drawing and directed by Engr-in-charge

Taking out old U/S drawer and S&F new drawer of 18mm thick prelaminated MDF board exterior grade one side decorative and bottom with 6mm thick plywood commercial grade complete all as shown in drg and directed by Engr-in-Charge.

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

Chair writing ( FD 280,FD 202,FD 261, FD 148) :- Replacement of the following old damaged/ decayed parts of chair writing with new parts made of Ist class new teak seasoned complete all as specified and shown on drg.

Front leg to Chair

Rear legs

Right or front or rear or Left rails of Seats with canning holes

Stiffener

Top Rails

Arms to Chair

HAT STAND WITH MIRROR ( FD 233 ) :- Taking out unserviceable mirror of hat stand and S&F of new mirror, 4mm thick and fixed complete all as specified on drawing and directed.

S&F in replacement of new brass cap hooks as per existing shape & sixe complete all as specified on drawing and directed.

Taking out unserviceable back portion plywood of hat stand and S&F of new 12mm thick plywood, BWR grade, commercial type complete all as specified on drawing and directed.

Removing of old unsv plywood front side of hat stand and and S&F new plywood of hat stand one side teak face 4 mm thick with 4 mm thick teak wood beading all round complete all as specified on drawing and directed.

kailash brothers (BID ID -3149234)

Star Sofa House (BID ID -3148826)