CERTAIN REPAIRS WORKS IN SHEDS OF TECHNICAL AREA AND CERTAIN PERIODICAL SERVICES IN ZONE B AREA, EME LINE AT FORT CANTT ALLAHABAD.

Amount

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying one coat of white wash, complete all as specified and directed.

Preparation of old decorated plastered surfaces of ceilings including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying one coat of white wash, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of acrylic emulsion paint of approved colour, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint of approved colour, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying two coats of cement base paint, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls (of height upto 12 metre approximately) including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of weather-proof antifungal exterior emulsion paint of approved colour, complete all as specified and directed.

Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of acrylic emulsion paint on walls surface, complete all as specified and directed.

Complete removal of existing treatment from walls (of height upto 12metre approximately) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and including applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of weather-proof antifungal exterior emulsion paint, complete all as specified and directed.

Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of white colour / approved colour, complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern, complete all as specified and directed.

Preparation of old decorated plastered surfaces of ceilings including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying two coats of golden colour paint on ceilings, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of rubbish from the site, complete all as specified and directed.

Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of walls, finishing the surface even and smooth with out using exta cement, complete all as specified and directed.

Rendering 5mm thick in CM 1:4 on fair faces of concrete surfaces of ceilings, finishing the surface even and smooth with out using exta cement, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying three coat of white wash, complete all as specified and directed.

Preparation of newly plastered surfaces of ceiling and applying two coat of white wash, complete all as specified and directed.

Preparation of new plastered surfaces of walls by rubbing with sand or emery paper and applying two coat of cement base paint of approved colour over a coat of alkali resistant primer, complete all as specifed and directed.

Preparation of new plastered surfaces of walls by rubbing with sand or emery paper and applying two coat of acrylic emulsion paint in approved colour over and including provision of a uniform layer of 1mm thick wall care putty (Make: JK white / Birla], complete all as specifed and directed. NOTE:- (applicable for Sl. No. 1.00 to 9.00, 12.00, 16.00 to 19.00 here-in-before and 41.00 to 43.00 here-in-after):- The quoted rates shall deemed to be inclusive of the following provisions : (a) Use of all scaffolding, trestles, ladders, cradles, etc., as necessary for execution of work and protective measures. (b) Removing of nails, making good holes, cracks, etc. (c) Work in patches, and in narrow \widths. bands, cornices, pilasters, etc. and cutting in edges to line where necessary. (d) Spreading and removing coverings to doors, windows, floors, fittings, etc., to protect them from splashes. (e) Removing and replacing furniture, movable cupboard, chicks, blinds, etc. (6) Washing floors, cleaning glass, joinery, electric fittings, wiring, etc. of drops and splashes and leaving premises, clean and tidy.

Dismantling of AC corrugated or semi corrugated sheet including AC ridges as in roof or wall covering, complete all as specified and directed..

Asbestos cement corrugated or semi-corrugated sheets in roof covering, walls etc, 6mm thick, Fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed..

Fixing only old serviceable Asbestos cement corrugated or semi-corrugated sheets in roof covering, walls etc, 6mm thick, Fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed.. NOTE:- Old serviceable AC sheets retrieved from dismantling all as per Sl. No. 20.00 here-in-before shall be used in this item.

Asbestos cement two piece adjustable serrated plain wing ridge, 6mm thick, fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed..

Fibre glass reinforced translucent corrugated sheeting, 2mm thick, with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Galvanised, corrugated mild steel sheeting, 0.63mm thick, with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc., with grade of zinc coating 275, complete all as specified and directed.

Plain, galvanised, mild steel sheeting, 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, valley gutter, ridge hips etc, fixed with self tapping screws, fixed in repairs, complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws, fixed in repairs, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

Rolled mild steel sections conforming to Fe410-W (Gde E-250) quality 'A', as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed.

Dismantling timber scantlings 40sq. cm and over in section, in any position and any type, as in framed work, complete all as specified and directed.

Supply only integral water proofing compound, ISI approved make, complete all as specified and directed. NOTE:- Integral water proofing compound shall be incorporated in the work all as per manufacturers instructions only.

Second class hard-wood in scantlings, clean sawn timber fixed as in girders, lintels, wall plates, joists, purlins, rafters etc., complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint in camouflage pattern over a coat of red oxide primer, complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework, precast concrete articles, complete all as specified and directed.

Brickwork with sub class 'B' bricks (crushing strength not less than 75 kg per sq.m), old size straight or curved on plan exceeding 6 metre mean radius, built in CM 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises, complete all as specified and directed.

Rendering 15mm thick, on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished surface even and fair without using extra cement but mixed with water proofing compound, complete all as specified and directed. NOTE:- Water proofing compound shall be measured as 'Supply only' under respective item of this Schedule.

Preparation of new plastered surfaces of walls by rubbing with sand or emery paper and applying two coat of cement base paint of approved colour over a coat of 1mm thick wall putty, complete all as specifed and directed.

Preparation of old plastered surfaces of ceiling and applying two coat of white wash, complete all as specified and directed.

Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means and applying two coats of acrylic emulsion paint on walls surface over a coat of alkali resistant primer, complete all as specified and directed.

Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means and preparation of surfaces by rubbing with sand or emery paper and applying two coat of cement base paint of approved colour over a coat of alkali resistant primer, complete all as specifed and directed.

Demolition of cement concrete work (un-reinforced) in ground floors and pavings not exeeding 15 cm thickness (below or above ground level) and removal of debris from the site, complete all as specified and directed.

PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate), 75mm thick, as in plinth protection, finished even and smooth without using extra cement, including making joints 10 mm wide to the full depth of PCC at every 3 metre and at every change of direction and filling the same with and including provision of bitumen and sand mortar in 1:3, complete all as specified and directed.

PCC 1:2:4, 50 mm thick, type B-1 (using 20mm graded crushed stone aggregate) laid in alternate panels including use and waste of form work, finished even and smooth without using extra cement, complete all as specified and directed.

Wearproof topping, 20mm thick (incorporating an approved metallic floor hardner in the ratio of 1 part of hardner : 4 parts of cement in dry state), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner), complete all as specified and directed. NOTE:- Metallic floor hardner shall be measured as 'Supply only' under resepctive items of this Schedule.

Supply only approved metallic floor hardner, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises, complete all as specified and directed.

Non-skid jointless ceramic light coloured tiles [premium quality] 7 to 8 mm thick, size of tiles shall be 300mm x 300mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with and including provision of 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Non-skid jointless ceramic light coloured tiles [premium quality] 7 to 8 mm thick, size of tiles shall be 400mm x 400mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with and including provision of 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Glazed ceramic coloured tiles [premium quality] as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 450mm x 300mm x 7mm thick / 350mm x 250mm x 7mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or any thickness in floors, aprons etc., laid, bedded and pointed in cement mortar, complete all as specified and directed.

Machine cut mirror polished kota stone slab, 20 to 25 mm thick, in flooring, laid over and including provision of 20 mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed with grey cement slurry mixed with pigment to match with the colour of slab, including rubbing and polishing to mirror finish, complete all as specified and directed.

Machine cut mirror polished kota stone slab, 20 to 25 mm thick, in vertical surfaces such as skirtings / dado / risers to stepts etc., laid over and including provision of 10 mm thick backing coat in cement mortar 1:4, set and jointed with grey cement slurry mixed with pigment to match with the colour of slab, including rubbing and polishing to mirror finish, complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be printed to match with the prelam sheet reinforced with M.S. Square tube, complete all as specified and directed. MAKE:- Syntex / Rajshree Plastic

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. MAKE:- Syntex / Rajshree Plastic

Aluminium anodised alloy barrel tower bolt of extruded section, 150 mm long, fixed with screws, complete all as specified and directed.

Butt hinges, 100 mm long, medium weight, cold rolled mild steel with steel pin hinge and fixed with steel screws, complete all as specified and directed.

Aluminium anodised alloy handles, 125mm long, cast type fixed with screws, complete all as specifeid and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, length of bolt 250 mm, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames fixed with putty or beads etc., complete all as specified and directed.

Sheet glass, 3 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

Sheet glass, one side shall be ground or obscured or frosted, 4 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer, complete all as specified and directed.

Supply & Fixing in repair in position, 'E' board 605mm x 605mm x 4mm thick, white pre-laminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed powder coated white flanges; the frame work shall comprise of main runner made from 0.33mm thick glavanised steel sheet and of size 24mm x 32mm x 300mm board spaced at 1200mm maximum centre-to-centre; hangers of GI wire 1.8mm dia shall be fixed by approved rawl plug level and fasteners and screws etc; the last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm longer cross-tee (with double stitching) shall be interlocked between main runners 600mm centre-to-centre from 1200mm x 600mm modules cross tee longer than 600mm to be supproted independently; 600mm x 600mm doubles shall be formed by fitting, 600mm long cross tee cnetrally between 1200mm cross tee (with double stitching) shalll be interlocked between main runners at 600mm centre-to-centre fromm 1200mm x 600mm modules cross tee longer than 600mm to be supported independently; Tee perimeter wall angle shall be 0.45mm thick GS sheet of size 19mm x 19mm and 300mm long of white colour, complete all as per manufacturers instructions, complete all as specified and directed. MAKE:- Armstrong or Ramco Industries NOTE:- Manufacturers test certificate of 'E' board shall be produced on each and every lot of supply for verification by Engineer-in-charge and for recommendation of payment by him.

Drappery or curtain rods, 25 mm dia, of mild steel tubing with PVC coating with Chromium plated brass end brackets (wall-to-wall or flush to wall), decorative type, cut to length as required, fancy type, with PVC rings, fixed in repairs, complete all as specified and directed.

Tubular towel rail of brass chromium plated, 20mm dia, 'D' type, 600mm long between flanges, fixed in repairs, complete all as specified and directed.

Angle valve, two-way, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, 15 mm bore, fixed in repairs, complete all as specified and directed.

Bib taps, cast copper alloy, chromium plated, fancy type, with capstan head handle, screwed down, screwed for iron pipe or for brass ferrule, for 15mm bore, fixed in repairs, complete all as specified and directed.

PVC valveless syphonic action type low level flushing cistern 'white' with inlet, 10 litre capacity including 32 mm bore flush pipe, with cantilever brackets, PVC ball valve, float and PVC handle, PVC connection 15 mm dia with PTMT nuts 600 mm long, fixed in repairs, complete all as specified and directed.

PVC connection 15mm size with PTMT nuts on both ends of length 450mm, fixed in repairs, complete all as specified and directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe), including provision of PCC 1:3:6 type C1 (20mm graded stone aggregate) bedding and connecting to (including) CI trap ‘P’ or ‘S’ type 100mm size and making good to match with the existing surface of floor, fixed in repairs, complete all as specified and directed.

Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flushing pipe), fixing of seat cover, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., fixed in repairs, complete all as specified and directed. NOTE:- Plastic seat cover shall be measured as 'Supply only' under respective item of this Schedule.

Supply only water closet plastic seat cover closed pattern with flat bottom and cover with steel pin hinging device and fixed on EWC, complete all as specified and directed.

Vitreous China wash hand basin, white, flat back, size 550mm x 400mm excluding chain and plug and porcelain stopper but including cantilever brackets of mild steel angle 35mm x 35mm x 5mm, including provison of 32mm dia CP waste coupling and 32mm dia 450 mm long PVC waste pipe with PTMT nuts on both ends (rigid quality), with and including fixing of tap, complete all as specified and directed. NOTE:- Pillar tap / mixture shall be measured and paid separately as 'Supply only' under respective items of this Schedule.

Supply only Pillar tap, 15mm bore, fancy type, chromium plated screwed down high pressure with long screwed shanks and fly nuts, with or without lettered 'hot' or 'cold' letters, screwed for galvanised iron pipes, complete all as specified and directed.

Supply only Waste pipe, 32mm dia, 1.00 metre long, flexible, suitable for Wash hand basin, fixed in repairs, complete all as specified and directed.

Taking up or down galvanised steel tubing 15mm bore including connections, complete all as specified and directed.

Taking up or down galvanised steel tubing 20mm bore including connections, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, laid in floors or fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, laid in floors or fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.

Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top), 500 litre capacity, ISI marked, double layered, hoisted and fixed in position including necessary connections to inlet / outlet and wash out pipes, including provision of ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density PVC float valve 20 mm dia (minium weight 210 gram), screwed for iron pipe complete as specified in SSR Part-I, fixed in repairs, complete all as specified and directed.

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, 20mm bore, fixed in repairs, complete all as specified and directed.

Ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20mm (minimum weight 210 gram, fixed in repairs, complete all as specified and directed.

UPVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls including provision of necessary fixing clamps, fixed in repairs, complete all as specified and directed.

UPVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in floors or trenches, fixed in repairs, complete all as specified and directed..

UPVC (SWR) bends of any radius and 110mm bore, fixed to pipes laid on walls, jointed with adhesive, including making good with PCC 1:2:4 as required, fixed in repairs, complete all as specified and directed..

UPVC (SWR) bends of any radius and 75mm bore with oval and accessed door, jointed with adhesive, fixed in repairs, complete all as specified and directed..

Chromium plated grating, 100mm size, fixed with coloured cement to match with the existing, fixed in repairs, complete all as specified and directed.

Airways Enterprises

M/S SHARADA ASOCIATE

K L KALSI

8M/S TIWARI and SONS

M/S SHRINATH CONTRACTION

Attar Singh and Sons

vs construction

ANKIT SHIP REPAIRERS AND SUPPLIERS