SPECIAL REPAIR TO BLDG NO P 01 SITO AND P 29 DHOBI GHAT AT AIR FORCE STATION BORGAD

Amount

Taking down chowkats or frame, n.exc 1.5 sqm each with shutters (without taking off shutter from the frame) all as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 but n.exc. 4 sqm in each complete all as directed.

Taking down shutters of any descrption exc 1 sqm but n.exc 2 sqm each as directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m all as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as directed.

M&L for demolition of concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

M&L for demolition of concrete (reinforced) in any description and in any position not otherwise specifically provided complete all as directed.

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed

Removing steel window/ventilator shutters by cutting hinges and making good any demage occurred during removal of shutters n.exc 0.75sqm complete all as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Dismantling of stone slab and tiles of any description or thickness in floors or walls, aprons etc tiles laid, beded and pointed in any mortar complete all as directed.

Dismantling of Asbestos Cement (corrugated, semi corrugated etc), sheets in roof coverings

Supply and Fix solid PVC door frame of size 50mmx47mm made out of 10mm printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening including hold fast Complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification and drawing Complete all as specified and as directed.

Supply and fix MS framed work as in doors and gates of angle or other sectionwith gusset plates, rails braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete all as specified.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted . Welded or forged into spikes. Framedguard bars iron doors . Ladders framed baiusters , walk ways . Railings , frame work of of water tanks and ssimilar work conforming to fe410.

S & F Second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and as specified and directed.

S & F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

Material and labour for Aluminum powder coated sliding window with aluminium powder coated three track frame of size 92mm x 32mm & 1.6 mm thick with 3 Nos sliding shutters of powder coated aluminum section (top rail bottom rail and style of size 40mm x 18mm & 1.5mm thick) screwed to walls/floor including provn of tinted sheet glass panels of 5mm thick fitted in pannels (2 Nos) and one shutter with stainless steel wire cloth 0.36 mm nominal dia and width of aperture 1.40mm with and including necessary locking device, jointing cleats, glazing clips, rubber packing beading , aliminum bidding and screws etc. complete all as specified and as directed by Engineer-in-Charge..

M & L for Aluminum powder coated (Thickness of powder coating not less than 50 micron) as in Partition/ventilators and small window single leaf etc. cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete, screws plugs, handle, tower bolt, stay hocks etc all as specified and directed. (Make JINDAL/HINDALCO) Notes :- (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of glass sheet and wire mesh will be measured and paid seperately. .

S& F 12mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed to Aluminium frame work complete all as specifed and directed.

Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as directed.

S&F Stainless steel butt hinges, 100mm medium weight and fixed all as directed.

S& F butt hinges, cold rolled mild steel , 100mm medium weight and fixed all as directed.

S & F 125 mm extruded aluminium alloy handles , fabricated type, anodised all as directed.

S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised all as directed.

S & F 300 mm long aluminium alloy, anodised sliding door bolt with haps , staple, bolt type and fixing clip of sheet, cast of extruded section and fixing bolt fixed all as directed.

Material and labour for Machine cut mirror polished kota stone slab flooring 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including cement screed bed in cement mortar 1:6 complete all as specified and as directed.

Material and labour for mirror polished kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for coloured Non skid ceramic tiles of colour design and pattern as approved 7 to 8mm thick (square/ractangular) area of each tiles exc 0.11 sqm but n exc 0.18 sqm as in floors etc., laid over 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No 36 above but in skirting over 9 to 10 mm thick plaster in cement mortar 1:4 including necessary cutting of tiles as required size all as specified and as directed.

M&L for Vetrified ceramic tiles 10 mm thick light shade joint free (square/Ractangular) polished area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade, over and including 15mm thick cement screed bed in cement mortar 1:6 Complete all as specified and as directed.

All as per item No.38 but as in skirting/dado including cutting of tiles as required size over 10mm thick plaster in CM 1:4

M&L Glazed ceramic coloured tiles pattern,design and concept of different colour as approved in vertical surface 375x 250x 7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement Mortar 1:4 complete all as specified and directed.

M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in bedding layer of floor finished the surface even and rough complete all as specified and directed.

M & L for 75 mm thick Cement Concrete type D 2 (1:4:8) using 40 MM graded stone aggregate as in sub bases, sub floors finished the surface even and rough complete all as specified and directed.

M&L for rubber moulded smooth finish and glazed Chequered cement concrete colour tiles with grey cement pigment of size 300 mm x 300 mm x 25 mm thick laid over and including 15 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

Meterial and labour for Machine pressed precast interlocking tiles paver block rubber moulded smooth finish glazed any shape and size 60mm thick made with Grey cement and pigment confirming to IS 15658-2006 , M-35 Grade laying all as specified and directed.

Meterial and labour for Sand filling under floors or in foundations including watering and consolidation all as specified and directed.

M & L for providing cement concrete type B0 (1:2:4) using 12.5 mm broken stone graded aggregate as copings, kneelers, bed plates, apex stones, bed plates, kerbs, etc., including weathering, slightly rounded or chamfered angles and throating, including all necessary form work complete all as specified and directed.

M&L for form work to sides and soffits of shelves, Cooking platform and similar work, finished rough surfaces on concrete all as specified and directed.

M&L RCC Type B1, 1:11/2:3 using 20mm graded stone aggregate in for Shelves, Cooking plateform and similar work etc complete all as specified and as directed.

M & L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, shelves and like jointed over and including 10mm thick cement mortar 1:4 screed and pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, incuding grinding, moulding and polishing to exposed edges complete all as specified.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete all as specified and directed.

M&L rendering 15mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:4 including finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick,plaster on fair faces of brick work or stone masonry or concrete surfaces in CM 1:6 including finished surfaces even and smooth without using extra cement complete all as specifed and directed.

M & L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for 75mm thick cement concrete (1:3:6) type C2 using 40 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & fair and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing surface all as specified and directed.

S&F vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including making good damaged/disturbed surfaces complete as specified and directed.

S&F in repairs Vitreous China wash basin (WHB), white, flat back, size 550x400mm excluding taps and plug but including Angle Iron brackets, 32 mm dia CP waste coupling, 32mm bore PVC Waste Pipe complete all as specified and directed.

Supply and fix in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle , PVC Flush Pipe and brackets including taking down old cistern all as specified and as directed.

S&F in repairs vitreous china half stall urinal (White) with grating & union for discharge pipe including providing and fixing CP pipe for spreader and CP push cock etc complete all as specified & as directed.

Supply and fix 40mm dia low density polyethylene (LDPE) pipes pressure rating 6Kg/Sq. cm laid in floor or fixed to walls all as specified and as directed.

S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 15mm all as directed.

Supply and fix 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 20mm complete all as directed

Supply and fix 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing, Sunshades, shelves, lintels etc cutting not exc 10cm girth and making good , complete all as specified and directed.

S&F Brass Chromium plated Tubular Towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.

S&F Stainless steel Peg set (Set of 06 each) fixed with chromium plated brass screws and wooden/plastic plug all as directed. Make Prayag Cat No BEA-30 or equivalent as approved by GE. .

S&F Toillet paper holder Chromium plated as per sample completer all as specified and directed.

S&F in repair health faucet with one metre long flexible tube and wall hook chromium plated, screwed down for iron pipe

Dismantling PVC Pipe of any dia and any description laid in floor and wall

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed.

S&F PVC (SWR) bends 110mm dia any radius complete all as directed.

S&F PVC (SWR) junction single(Single T) equal or unequal with access door 110mm dia complete all as directed.

S&F PVC(SWR) Reducers 110mm to 75mm complete all as directed

S&F PVC(SWR) Vent cowl 75mm dia complete all as directed.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed.

All as per item No 86 here in before but fixed to walls complete all as directed.

S&F PVC (SWR) bends 75mm dia any radius complete all as directed.

S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia complete all as directed.

S&F in repair PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement all as directed.

S&F in repair 25 mm dia stainless steel Drapery curtain rod complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed.

S&F glass shelf assembly 450mmx150mm consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium pleted bracket guard and railing make prayag or equivalent

S&F Rotational moulded polyethylene water storage tanks tripple layer 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water storage tank of any description all as directed.

S&F Ball brass valves, high pressure, with polythene float and flynut for 20mm bore pipe, screwed for iron pipe or brass ferrule and fixed in position all as specified

S&F 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

S & F floor door stoppers of aluminium alloy body & tounge anodised with hard drawn steel spring fixed in floor complete all as directed.

Material and labour for applying 1-2 mm thick wall care putty in two layers on newly plaster surface of walls to achive smooth complete all as directed.

M &L complete removed existing treatment on old platered surface of wall and applying 1-2 mm thick wall care putty in two layers to achive smooth surface of walls complete all as directed.

M&L for preparation of newly plastered /wall care putty surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of old wall surfaces by washing rubbing down and stopping of distempered surfaces and applying two coat of distemper oil emulsion white or tined on walls including cornices etc complete all as specified and directed.

Material and labour for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old Ceiling surfaces by brooming down and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coats of Exterior acrylic emulsion Weather coat Anti Fungal over one coat of primer including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete as specified and directed.Make:-Burger/Apex

M&L for Complete removal of existing treatment to walls and applying two coat of Exterior acrylic emulsion Weather coat Anti Fungal on walls over one coat of Primer complete all as specified and directed by Engineer in charge

M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood and wood based of any description, not otherwise descreibed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Praparation of old painted surfaces of steel and iron of any description, over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new steel surfaces of of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed..

Excavation in trenches n.exc. 1.5 M wide and n.exc. 1.5 M in depth for foundation and getting out in Hard/dense soil.

M&L for cement concrete 1: 4 : 8 type D 2 using 40mm graded stone aggregate in foundations, filling and mass concrete

M&L for form work to sides of concrete foundation, footing, bases of columns, plinth beams and similar work, vertical or to batten rough finish flat surfaces on concrete all as specified.

M&L for form work to sides of Pillars, posts, struts piers, columns etc in squarre, rectangular or polygonal, rough finished surfaces of concrete all as specified.

M&L RCC 1:11/2:3 using 20mm graded stone aggregate in foundation including footing, plinth beam, base for column, etc complete all as specified and as directed by Engr-in charge.

M&L RCC 1:11/2:3 using 20mm graded stone aggregate in for columns, pillars, piers, posts and struts etc complete all as specified and as directed by Engr-in charge.

M&L for TMT bars 10mm dia. & over cut to lengths, bent to shape required hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia. All as specified and directed.

All as per item No.-115 herein before but 6mm to 8mm dia as in stirrups all as specified and directed.

S&F steel work in tubular trusses, purlins, rafter, posts, gusset plates cleats etc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 116-1979 grade (medium grade all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws all as specified and directed.Make:-JSW/TATA

Cutting holes into or through brick walls built in cement mortar or cement lime mortar area exc 150 sqcm but n exc 400 aqcm and making good in cement concrete 1:2:4 type B-1 complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M & L for Machine cut cudappah stone slab 20-25mm thick as in partition and the like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Taking down carefully existing bitumen tarfelt, including plaster of any description over the surfaces of roof, terraces including flashings and junctions of parapets/Curb walls etc and removing of the rubbish to a distance exc. 500m but n.exc. 1.00 Km and depositing where directed,complete all as specified and as directed by Engineer-In-Charge.

M&L for 15 mm thick rendering on RCC Roof top surface in cement mortar 1:4 mixed with WPC @ 3% by wt of cement finished the surfaces even and smooth complete all as specified . Note :- WPC shall be measured seperately as supply only.

Supply only integral water proofing compound.

M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as directed and given here in after (a) Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces prior laying APP. (b) Providing water proofing treatment with five layered membrane 3mm thick weighing not less than 3.5 kg/sqm APP modified bituminous membrane reinforced with non voven polyester mat of weight 160 gms/sqm as centre core applied by thermo fusion using LPG torch on the bottom portion of the membrane. (c) APP modified poymeric membrane shall be covered with bituminous based aluminium paint @200 gms per sqm in two coats.

Taking down existing copper/aluminum point wiring (light/ fan/ socket or power points) complete including (fittings such as switches, ceiling roses, pendents, regulators, sockets, Light fitting etc including wooden battens /casing /capping and conduit etc and making good disturbed surface of walls, ceilings and floors etc. complete all as specified & as directed by Engineer-in-Charge.

Taking down carefully sub main wiring including all accessories without disturbing existing wiring fittings fixture site and making good to the disturbed surfaces all as directed and as specified in any type and size.

Taking down main switch, DB, MCB, and electric Meter etc all as directed.

Material & Labour for Point wiring with 1.5 Sqmm (nominal area),FRLS, PVC insulated sheathed,ISI Mark ,multistranded copper stranded conductor cable run in and including concealed in wall/floor medium grade PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm FRLS, PVC insulated sheathed,ISI Mark ,multistranded copper conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge.(Note: Cutting of chases in the wall/ Roof/ Floor including making good of disturbed surfaces and painting to match with existing touch up etc are deemed to be included in the quoted rate.)

All as per item No 129 here-in-before but for one 3 pin 5 Amps socket outlet on independent board.

All as per item No 129 here-in-before but for one 3 pin 5 Amps socket outlet on the same board .

All as per item No 129 here-in-before with 2.5 sq mm size cable, for one 6 pin 5/15 Amps socket outlet on independent board.

M&L wiring for circuit/ sub main wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core, 1100 v grade cable in conceled/surface as required using 2x4.0 Sqmm+1x4.0 Sqmm earth wire,cables inciuding run in PVConduit of suitable size and taking down old unserviceable submain from existing position ,complete all as specified and as directed by Engineer-In-Charge (Note: 2 run of 4.0 sq mm & 1 run of 4 sq mm in PVC Conduit of suitable size combined shall be measured & paid as one unit )

Modular switch one way 6 Amp,1 Module , Make Legrand Mylinc/ L&T/Crabetree, complete all as specified and directed by Engineer-in-Charge

Supplying and fixing Modular socket, 6 amps-2/3 pin combined, 2 Module, Make Legrand Mylinc/ L&T/Crabetree, complete all as specified and directed by Engineer-in-Charge

Supplying and fixing Modular switch , one way, 16 amps, one Module of Make Legrand Mylinc/ L&T/Crabetree, complete all as specified and directed by Engineer-in-Charge

Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module of Make Legrand Mylinc/ L&T/Crabetree, complete all as specified and directed by Engineer-in-Charge

Supply & Fix Modular Fan regulator electronic step type 230 V 2 Module. Make Legrand Mylinc/ L&T/Crabetree, complete all as specified and directed by Engineer-in-Charge

Supply & Fix Ceiling rose surface type, PVC/Polycarbonate isolated body size 50x28 mm two to three terminals. Make : Anchor/Legrand, complete all as specified and directed by Engineer-in-Charge

Supply & fix in repair decorative ultra slim square profile linear DELITE LED lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 18W LED 6000K, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting, complete all as specified and directed by Engineer-in-Charge. MAKE : Havells, Model No. LHEXBTP7UN1W018 or equivalent in Bajaj/ Crompton Greaves.

Supply & fix in repair decorative ultra slim square profile linear D-ELITE LED lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 9W LED 6000K, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engineer-in-Charge. MAKE : Havells, Model No. LHEXBTP7UN1W009 or equivalent in Bajaj/ Crompton Greaves.

Supply & fix in repair decorative ultra slim square profile linear DELITE LED lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 5W LED 6000K, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engineer-in-Charge. MAKE : Havells, Model No. LHEXB or equivalent in Bajaj/ Crompton Greaves.

Supply and fix in repair LCTLSN-36W- CDL 6000K Ultra modern recess mounting luminare suitable for armstrong/ grid/ POP ceiling complete with separate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting, complete all as specified and directed by Engineer-in-charge. MAKE : Crompton , Model No. LCTLRN-36-CDL or equivalent in Bajaj/Crompton Greaves.

S&F Exhaust fan 300 mm sweep with louvers, operated on 230/240V AC Single phase electric supply 900 RPM complete duly grauted bolts in the wall fixed with nuts, bolt and washers including making suitable size hole in the existing wall, plastering, white washing or colour washing to the disturbed surface of wall complete matching with the existing including connecting with 3 core stranded copper conductor cable cord of size 0.5 sqmm from ceiling rose to fan connector complete all as specified and directed. Make:- Havells Turbo Force or equivalent model of Bajaj/CG.(Rates quoted are deemed to be included with making hole as per fan sweep dia & making good of damaged surface & plastering & painting to match with existing touch up.)

Supply and fix in repair MCB SPN 32 amp 240 V,10KA, C curve,DX3 series of Make Legrand cat part no 408617 complete all as specified & as directed by Engineer in charge.

Supply and fix in repair MCB SP 6-32 amp 240 V,10KA, C curve,DX3 series of Make Legrand cat part no 408594 complete all as specified & as directed by Engineer in charge.

Supply and fix in repair double door sheet metal enclosure for DBs when MCBs to be used single pole and neutral IP 43 IK-09 protection with acrylic door for DX3/MCB , 240 volt with 200 amps rated bus bar bar 8 way of Make Legrand Cat No 607721 or equivalent model of L&T/Siemens complete all as specified & as directed by Engineer in charge.

Supply & fix in repair double door sheet metal enclosure distribution board recessed mounting 230 volt SPN DB for DX3/Lexic MCB ,IP 43 IK-09 with acrylic door for DX3/MCB, 4 way of Make Legrand cat part No 607720 complete all as specified & as directed by Engineer in charge. (Note: Outgoing MCB will be measuserd & paid under relevant item)

Supply & fix in repair sheet metal enclosure distribution board recessed mounting 415 volt vertical TPN DB DPX3 160 MCCB DB ,IP 43 IK-09 , 4 way with metal door of Make Legrand cat part No 607913 with including MCCB 63 Amp Four pole 16 KA ,DPX3 160 series as incomer of Make Legrand cat part No 420013 and SP/TP MCB as outgoing as per IS including compact insulated bus bar and rounded neutral,door earthing complete all as specified & as directed by Engineer in charge. (Note: Outgoing MCB will be measuserd & paid under relevant item)

Supply and fix sheet metal enclosure with socket plug top and MCBs single pole with a two pin and earth plug and socket complete with one single pole MCB of 32 Amps all as specified and directed by Engineer-In-Charge.Make : HPL

Material & Labour for earthing lead fasteners etc and earthing complete with copper earth plate electrode 600x600x3.15 mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level,connected to 20×3 mm copper strip as earth lead by means of copper bolts,nuts ,washer and check nut of galvanized steel, protected by and including GI pipe 40 mm bore (light grade) and connected to main switch / MCB DBs box point / LP test point as directed and including cement concret pit in 1:2:4 type B1 using 12.5mm graded aggregate, with cast iron miled steel frame embedded in the concrete enclouser fineshed flushed & CI cover 10 mm thick of size (300mmx300mm CI) having locking arrengment hinged to CI frame all as shown under electrical plate of SSR Pt - I 2009 and as directed including painting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background, wiremesh funnel 20 mm bore GI pipe medium grade for watering adequate quantity of charcol ,Bentonite and common salt in alternate layer of 15cm 3ft x 3ft thick all around the electrode including necessery excavation & earth work in any type of soil complete testing on completion all as directed. Note:- i) Filling the pit with black cotton soil brought at site.

Supply & fix tempra plug & socket DB for DX3 Lexic MCB 32A 2P+E-DP cat part no 2896 of Make Legrand, complete all as specified and as directed by Engineer-in-Charge.

Supply and lay 1100 volt grade XLPE insulated armoured heavy duty LTUG stranded aluminium conductor 4 core cross sectional area 25 sqmm in trenches/ducts / passing through pipe or laid on surface with help of saddle including taking down old unserviceble cable from existing position complete all as specified & as directed by Engineer in charge.

Supply and laying ,testing & commissioning in trenches/ducts or passing through pipe/laid on wall with help of proper saddle 1100 volt grade LTUG cable with XLPE insulated armored heavy duty electric cable with stranded aluminium conductor 1100V grade 2 core cross sectional area 6 sqmm, complete all as specified and directed by Engineer-In-Charge.

Supply and lay in trenches/ducts or passing through pipe in repair ,testing & commissioning LTUG cable 2 core 10 Sqmm, 1100 volt grade, XLPE insulated armoured (heavy duty) stranded aluminioum conductor complete all as specified

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 meter in depth and getting out in soft/loose soil all as directed complete all as specified & as directed by Engineer in charge.

Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm all as directed complete all as specified & as directed by Engineer in charge.

Removing of surplus soil not exceeding 50 meter and depositing where directed at a level not exc 1.50 mtr above the starting point all as directed complete all as specified & as directed by Engineer in charge.

Supply and laying Double walled corruyated (DWC) Duct (Dura- Guard) as per IS-14930 Part - II for LT UG cable protection including coupler, elbows, T- Joint, Bends, etc and test report Make :- Dura- line/Gemini/Rex. Of size 38mm

M&L for galvanised steel water tubing light grade with all fittings laid in trenches of size 40 mm dia bore for cable protection under road/Path ,complete all as specified and as directed by Engr-in-Charge.

M/s M R MAHANA