Repairing and strengthening of internal coal transportation roads and other important roads at Penganga OC Mine.

Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification.By Mix in Place Method For Grading-I Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of specification.By Mechanical Means Grading- I (63 to 45mm) Using Screening Type-A (13.2mm

Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means In area of thorny jungle

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead upto 1000m as per relevent clauses of section-300 of specification.

Compaction of road sub- base/road surface by watering and rolling with vibratory rollar 8 tonne, as per instruction of Engineer in - charge or representative (s), including cost of equipment, fuel, oil, operator, water etc all complete. The work is to be done 8 hour/day in general shift.Only running time shall be measured for payment.In mesurment, number of days shall be calculated as total number of running hours ( as per actual measurment ) divided by 8. (Note : - Rolling / watering done in item no 1,2,$ 3 above shall not be counted for mesurment in this item )

Total impact of GST for the purpose of CTC