PERIODICAL SERVICES AT MD ACCN IN AOR OF GE (N) AKHNOOR

Amount

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

15mm thick cement plaster rendering in CM 1:4 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

Rendering 10 mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified

Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished the surface even and smooth without using extra cement, complete all as specified.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework, complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed.

Repair to balcony/facia and soffit of chajjas etc by taking down old plastered surfaces and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqcm in width or girth & applying rendering 15 mm thick dubbing coat where required to match with the existing thickness in CM 1:3 including formwork/scaffolding work upto height 7.00mtr above ground level of bldg including preparation of new surface & apply two coats of apex paint over one coat of primer complete all as specified and as directed.

Complete removal of existing treatment and applying 3mm thick wall care putty on internal/external walls and ceiling all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed.

Preparation of new plastered surfaces and applying two coats of oil bound distemper white/tinted over priming plastered and other surfaces with alkali resistant priming paint on ceiling complete all as specified and directed.

Preparation of Old plastered and unplastered surfaces of walls, washing, rubbing, stopping, brooming down old distempered/painted surface with steel wire brushes including filling small depressions by putty and applying one coat of interior plastic Emulsion paint 1st quality (White/Tinted) incl priming of surface all as specified and directed.

Preparation of Old plastered and unplastered surfaces of walls, washing, rubbing, stopping, brooming down old distempered/painted surface with steel wire brushes including filling small depressions by putty and applying two coats of interior plastic Emulsion paint 1st quality (White/Tinted) incl priming of surface all as specified and directed.

Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall surface, complete all as specified and directed. Note:- (i) The work shall be carried out in different shade and the same shall be got approved from Engineer-in-charge/GE/ (ii) The work shall be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same. (iii) The contractor shall quote the rates taking the list of the bldgs into consideration and nothing on account of the same shall be admissible.

Preparation of existing surfaces and apply two coats of oil bound distemper to walls complete all as specified and as directed.

Preparation of Old plastered and unplastered surfaces of wall by washing, rubbing, stopping brooming down with steel wire brushing and applying one coat of oil bound distemper white/tinted including filling small depressions by putty ,complete all as specified and directed.

Preparation of Old plastered and unplastered surfaces of wall by washing, rubbing, stopping brooming down with steel wire brushing and applying two coats of oil bound distemper white/tinted including filling small depressions by putty , complete all as specified and directed.

Preparation of old decorated surface and apply one coat of Oil bound distemper on ceiling, complete all as speicfied and directed.

Preparing old surface (plastered or unplastered) surfaces of walls including cornices, pilasters etc by washing, rubbing, stopping brooming down with steel wire brushing and applying one coat of white wash on ceilings, complete all as specified and as directed.

Preparation of old decorated surfaces including brooming down with steel wire brushing, scraping down smoke soot, moulds,moss and efforescent salts and removing oil and greasy spots and applying one coat of cement base paint on walls all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width of girth not other wise described and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm width of girth not other wise described and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old treated surfaces of walls (plastered or unplastered) and applying one coat of Apex emulsion paint as in roof projection/chajjas etc complete all as specified and directed.

Writing letters or figures ( Block , Roman, Italic or Indian ) n exc 30 cm high complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises, dismantled material will be disposed out of MoD land complete all as specified and as directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with & including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.

Description all as per item No.26 here-in-before, but in vertical surfaces such as skirting/dado fixed over & including 10 mm thick rendering in cement and sand mortar 1:4, complete all as specified and directed.

Glazed ceramic coloured tiles 450x350x 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in CM 1:4 on other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed.

Granite (of any type) work glossy finish double charged 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite including 15mm thick screed of CM 1:4 after applying cement slurry@3 kg/sqm of cement per sqm, complete all as specified. (Note : A hole shall be drilled in the Granite after fixing for gas pipe all as directed by Engr-in-Charge).

Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.

Description all as per Item No 30 here-in-before, but in skirting/dado over and including 10mm thick rendering in CM 1:4.

Curtain rod 20mm dia Stainless steel fixed with and including two Nos of bracket & side cup including taking down of old unserviceable curtains rods, complete all as specified.

Taking down and refixing including resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed.

PVC valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified and as directed.

Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'P' trap fixed in repairs, incl making good dismantled floor with PCC 1:2:4 B-0, complete all as specified and directed. Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make specified in list of makes as approved by GE.

Vitreous china wash down water closet pan pedestal pattern in white colour excluding seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed. Cat Part No-20011 (SLICK) of Hindware or equivalent cat part of make specified in list of makes as approved by GE.

Plastic water closet seat cover white closed pattern with flat bottom and cover including chromium plated hinges device fixed in repairs, complete all as specified and as directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.2 meter long flexible spirochrome flex tube and ABS wall hook including making connections and fixed in repair in position complete in all respect as specified. Make-Jaquar Cat part no. ALD-573 or its equivalent cat part of make specified in list make, as approved by GE.

Toilet paper holder with flap recessed type stainless steel Complete all as specified and directed. Make-Jaquar cat part no. AQN-7753 or its equivalent cat part of make specified in list make, as approved by GE.

PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed, complete all as specified and as directed.

CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type screwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore including fixing in repairs complete all as specified and directed. Cat Part No-SOL-6053 of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

M/S KARAN SINGH CONTRACTOR (BID ID -3056498)

M/s Vishwakarma Enterprises (BID ID -3058249)

CHOPRA CONSTRUCTIONS (BID ID -3058386)

PACHNANDA BUILDERS (BID ID -3066323)

bushan kumar (BID ID -3057158)

M/S SIKANDER KUMAR SHARMA (BID ID -3058273)

M/S JEEVAN LAL SHARMA (BID ID -3058228)