CAMOUFLAGING PAINTING TO CERTAIN BLDGS IN TECH AREA AT AF STN ADAMPUR.

Amount

Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4) including taking down existing cement plaster, any description on walls etc including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified.

Two coats of exterior acrylic emulsion on old wall surfaces, in disruptive/camouflaging pattern of four shades including preparation of surfaces, for height not exceeding 7.5 metre, complete all as specified.

Two coats of exterior acrylic emulsion on old wall surfaces, in disruptive/camouflaging pattern of four shades, including preparation of surfaces, for height exceeding 7.5 metre but not exceeding 15 metre, complete all as specified.

Two coats of exterior acrylic emulsion on brick pitching surfaces of blast pens, stone/concrete surfaces/AC sheets and the like, in disruptive/camouflaging pattern of four shades, including preparation of surfaces, for height not exceeding 7.5 metre, complete all as specified.

Two coats of exterior acrylic emulsion over a coat of exterior (water based) primer on new plastered wall surfaces, in disruptive/camouflaging pattern of four shades including preparation of surfaces, for height not exceeding 7.5 metre, complete all as specified.

NOTES APPLICABLE TO SERIAL ITEM 2 TO 5 HERE-IN-ABOVE: (i) Exterior acrylic emulsion & primer shall be applied only through approved applicators, authorised by the manufacturers for such works. (ii) Entire quantity of material for this work shall be procured by the contractor from manufacturer's Depot & deposit the same with Enginer-in-Charge and same shall be issued to contractor on daily basis as per consumption at site. (iii) RGB value of four shades of disruptive/camouflaging pattern shall be all as shown on Drg No. GE/SK-1/19 sheet 1/2 & 2/2. (iv) Preparation of surfaces shall be done with mechanised sander having suction vacuum bag using smart periodical methodology including removal of vegitation growth, bushes and the like to the entire satisfation of Engineer-in-Charge.

One coat of interior acrylic distemper / OBD (white / tinted) of old wall surfaces including prepration of surfaces complete, all as specified.

Two coats of interior acrylic distemper (white / tinted) on new plastered wall surfaces, including preparation of surfaces, complete all as specified.

One coat of white wash on old wall surfaces, including preparation of surfaces, complete all as specified.

Two coats of white wash on new plastered wall surfaces, including preparation of surfaces, complete all as specified.

Peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified.

SUBASH MAHAJAN