CIVIL WORKS IN ATF PL, VASHI AND MPSPL TROMBAY

SPLY&APPLY — PLASTERING AND POINTING PROVIDING PLASTERING IN CEMENT MORTAR INCLUDING PREPARATION OF SURFACE BY CLEANING, REMOVAL ALL LOOSE MATERIAL IN THE REQUIRED THICKNESS TO THE LINES AND LEVELS, FINISHING, CURING ETC. COMPLETE USING PORTLAND SLAG CEMENT (CONFORMIN

SUPPLY AND LAYING OF PCC — PCC 1:3:6-PROVIDING AND LAYING CEMENT CONCRETE PCC 1:3:6 UNDER CONCRETE DRIVEWAYS, IN DRAINS, CHAMBERS, GAS TRAPS, FOUNDATION, FOOTINGS AND BASE FOR COLUMNS/WALLS, ENCASING OF PIPES, ETC. INCLUDING PROPORTIONING, MIXING IN MECHANICAL MIXER, LAYING VIBRATION BY MEANS OF MECHANICAL VIBRATORS, CURING ETC. COMPLETE BUT INCLUDING THE COST OF SHUTTERING.

SPLY&LAY OF PCC,1:2:4 — PCC (1:2:4): SUPPLY & LAYING OF PCC (1:2:4) INCLUDING CEMENT , SAND, AGGREGATE, WATER, LABOUR, PROVISION OF TEMPORARY SIDE SHUTTERING, CENTERING KEEPING THE SAME IN POSITION DURING CONCRETING AND REMOVING THE SAME AFTER SPECIFIC PERIOD, RAMMING, TAMPING, SUPPLY OF MANPOWER TOOLS, TACKLES, CURING ETC. ALL COMPLETE AS PER SPECIFICATIONS AND INSTRUCTIONS OF ENGINEER-IN-CHARGE. PCC (1:2:4) USING 20 MM AND DOWN SIZE GRADED STONE AGGREGATES. VIBRATOR TO BE USED WHENEVER DIRECTED BY ENGINEER-IN-CHARGE WITHOUT ANY EXTRA COST.

RR STONE MASONARY,1:5 — RR STONE MASONARY: IT INCLUDES SUPPLY AND CONSTRUCTION OF COARSED RANDOM RUBBLE MASONRY USING TRAP/GRANITE/QUARTIZE/GNEISS LOCALLY AVAILABLE BEST QUALITY IRREGULAR SHAPE HARD STONE OF ANY DIMENSION NOT LESS THAN 300 MM IN CM 1:5 OF ANY SHAPE IN BOUNDARY WALL AND DRAIN AS DIRECTED BY ENGINEER-IN-CHARGE. RATES TO INCLUDE SHIFTING OF STONES WITHIN PREMISES, HAMMER DRESSING OF STONES AS SPECIFIED, PROVIDING BONDING STONES OF REQUIRED SIZE AT ALL DEPTHS AND HEIGHTS, CURING, SCAFFOLDING INCLUDING FILLING OF JOINTS WITH CM 1:5 AND RACKING OF JOINTS ETC. ALL COMPLETE WITH AS PER SPECIFICATION, DRAWING AND INSTRUCTION OF ENGINEER-IN-CHARGE.

PROVIDING&CNSTRCTNG,BRI — "BRICK MASONRY WORKS :Providing and constructing following brick masonry in CM 1:5 using first quality bricks of Class designation 35 (35 KG / SQCM minimum) and conforming to IS-1077-1986 including providing all openings and projections , raking the joints to 1 cm deep, scaffolding, soaking of bricks in water prior to use and curing etc complete as per specifications .

SUP & LAY - — RCC 1:1.5:3 : PROVIDING AND LAYING REINFORCED CEMENT CONCRETE OF GRADE 1:1.5:3 INCLUDING SUPPLY OF CEMENT, SAND, AGGREGATE, WATER, VIBRATING, CURING, LAYING OF REINFORCEMENT AS PER DRAWING/SKETCHES ISSUED BY SITE ENGINEER, MANPOWER, TOOLS, TACKLES, ETC. ALL COMPLETE AS PER INSTRUCTIONS OF ENGINEER - IN - CHARGE. STEEL REINFORCEMENT AND SHUTTERING SHALL BE PAID SEPARATELY UNDER RESPECTIVE ITEM. THE RATE SHOULD INCLUDE BOTH SUB AND SUPER STRUCTURE. REINFORCED CEMENT CONCRETE (RCC) 1:1.5:3 (1:CEMENT :1.5 SAND : 3 HBG METAL OF 20 MM NOMINAL SIZE

SPLY AND LAY OF PAVER — PAVING BLOCKS PROVIDING AND LAYING INTERLOCK CONCRETE BLOCKS FOR DRIVEWAY/PATHWAY. THE BLOCKS SHOULD BE OF APPROVED QUALITY AND SHAPE OF 60 MM THICKNESS. THE BLOCKS ARE TO BE LAID ON MIN 50 MM SAND BEDDING AND IN PROPER SLOPE AND DESIGN AFTER PROPER SURFACE PREPARATIONS INCLUDING COMPACTION OF THE SURFACE BEFORE LAYING THE SAND BED AND AFTER PLACING THE PAVER BLOCK.

REMOVING OF PAVER BLOCK — REMOVAL OF EXISTING PAVER BLOCKS CAREFULLY AND WITHOUT DAMAGE AND STACKING/LOADING TO VEHICLE AS ADVISED BY EIC ETC, COMPLETE.

SUP & FAB - FENCINGCHAIN — SUPPLYING, FABRICATING AND FIXING GALVANIZED IRON CHAIN LINK FENCING WITH 3.5 MM DIAMETER WIRE, 50 X 50 MM DIAMOND MESH CHAIN LINK FENCE FABRIC CONFORMING TO IS:2721 FIXED TO STEEL/RCC POSTS/STRUTS ABOVE GROUND LEVEL, INCLUDING SUPPLY OF CHAIN LINK FENCING FABRIC IN 1.9 METER WIDE ROLLS, STRETCHER BARS, STAPLES, ETC. REQUIRED FOR FIXING THE FENCING, FIXING OF CHAIN LINK FENCING BETWEEN STRAINING POSTS, FIXING OF BOTTOM OF FENCING TO A CONCRETE SILL BEAMS BY MEANS OF HAIRPIN STAPLES, INCLUDING SUPPLY AND FIXING LINE WIRES, COMPLETE AS PER DRAWINGS, SPECIFICATIONS (SPECIFICATION NUMBER 6-65-0013) AND DIRECTIONS OF ENGINEER-IN-CHARGE (ALL MATERIALS SHALL BE SUPPLIED BY CONTRACTOR). (THE MEASUREMENT OF CHAIN LINK FENCING SHALL BE ON LINEAR BASIS FOR 1.9 M WIDE FENCING FABRIC).

INTERIOR PAINTING WORKS — PROVIDING AND APPLYING INTERIOR PLASTIC EMULSION PAINT :: APPLYING 2 COATS OF PLASTIC EMULSION PAINT OVER ONE COAT OF THIN WHITE CEMENT PRIMER (CREVICES SHALL BE FILLED WITH PUTTY AS PER THE DIRECTION OF ENGINEER IN CHARGE) AT ALL HEIGHTS WITH ALL MATERIALS, CONSUMABLES, LABOUR, TOOLS AND TACKLES, SCAFFOLDING ETC ALL COMPLETE AS PER SPECIFICATIONS AND DIRECTIONS OF ENGINEER IN CHARGE.