REPAIR TO ROADS IN OTM AND MD ACCN UNDER AGE BR I OF GE N MAMUN

Material and Labour for Repair to potholes depth of potholes exc 30 mm, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat of paving bitumen (VG-10) @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), complete all as specified. Note : The patching of pot holes shall be as per para 20.A.34.2 of SSR Part-I

Material and Labour for Repair to potholes depth of potholes exc 30 mm, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand), again well rammed (including supply of premix binder and sand), complete all as specified. Note : The patching of pot holes shall be as per para 20.A.34.2 of SSR Part-I

Scarifying or picking up gravelled macadam or bituminous macadam surfaces area n exc. 400 Sqm and depth not exc. 50mm, stacking the serviceable material at site and removing the surplus material n exc. 50m, complete all as specified.

Material and Labour for Preparation of water bound macadam (WBM) surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the surfaces by mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumen VG 10 grade @ 10 Kg per 10Sqm of road surface, complete all as specified and directed.

Material and Labour for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with paving bitumen (VG-30) @ 4% by total mix laid by self propelled mechanical paver, rolled and compacted to required gradient and camber using 8 to 10 tonne power roller/tandem vibrating roller to achieve uniform smooth surface complete all as specified and directed. Note: The specification of bituminous macadam shall be as per Para 20.B.3 of SSR Part-I.

Material and Labour for preparation of existing black top surface of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the surfaces by mechanical compressor to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG 10 grade @ 5 Kg per 10Sqm of road surface and laying bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) using binder (Bitumen VG-30 grade) contents @ 5.5 % by weight of total mix, mixed in Hot mix Plant and laid by using self propelled mechanical paver, rolled and compacted to required camber & gradient using 8 to 10 tonne power roller/tandem vibrating roller to achieve uniform smooth surface complete all as specified and directed. Note: The combined grading of aggregate shall be as per Para 20.B.2.5.4(d) & 20.B.4 of SSR Part-I.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) un-reinforced including removal of debris outside the MoD land, complete all as specified.

Material and Labour for Machine pressed precast concrete interlocking paver block rubber moulded glossy finish any shape, any colour and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade jointed with grey cement and pigment, complete all as specified.

Material and Labour for 75mm thick PCC 1:4:8, nominal mix, type D-2, (using 40mm graded crushed stone aggregate) as in sub base, surface finished finished even & rough, complete all as specified.

Material and Labour for preparing bituminous surfaces of road and applying thermoplastic road marking paint not less than 2.5 mm thick, white or golden yellow in colour, conforming to BS-3262, in lines, arrow, dashes & letters exceeding 10cm but not exceeding 15cm in width, applied hot, using special applicator machine and retroreflective glass beads @ 250 to 300 gram/Sqm to withstand vehicular traffic load, laid as per manufacture's instructions, the finish surfaces to be level, uniform and free from streaks and holes as per MORTH specification complete all as specified and directed.