Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.2 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED. | |
| 2 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹5.1 L
EMD Value
₹10,223
Closing Date
11 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER (CIVIL) BSNL CIVIL DIV-VARANASI
O/o EXECUTIVE ENGINEER (CIVIL) BSNL CIVIL DIV-VARANASI.
Day to day maintenance of T.E.buildings, Staff Qtrs. in BSNL Compounds CTO,Shivpurwa, Beniabagh, DLW, Durgakund, Hartirath, Sanjay Nagar,Tikari and Rajatalab in SSA Varanasi for one year.
2022_BSNL_130950_1
NIT No. 08/2022-23/EEBSNLCD/VNS
Open Tender
Civil Works
Item Rate
365 days
VARANASI
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Claim), BSNL O/o GMTD, Varanasi.
₹10,223
22 Nov 2022
3 Oct 2022
14 Oct 2022
3 Oct 2022
11 Oct 2022
3 Oct 2022
Amount
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
a) 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size)
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
a) Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
i) 35 mm thick
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :
a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws:
a) 30 mm thick shutters.
i) With ISI marked stainless steel butt hinges of required size - Second class teak wood.
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
a) 20 mm dia (heavy type)
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete.
a) Twin rubber stopper
Providing and fixing T or angle iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
a) Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) :
a) Flush / Ruled/ Struck or weathered pointing.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :
a) With cement mortar 1:4 (1 cement : 4 fine sand).
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
a) Float glass panes of thickness 4 mm.
b) Float glass panes of thickness 5.5 mm .
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead.
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. Note :- (1) The elevational area of the scaffolding shall be measured for payment purpose.(2) The payment will be made once only for execution of all items for such works.
Providing and fixing Stainless Steel A Isis 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
a) Kitchen sink without drain board
i) 610x460 mm bowl depth 200 mm.
Providing and fixing white vitreous china water closet squatting pan (Indian type) :
a) Orissa pattern W.C. pan of size 580x440 mm
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
a) 10 litre capacity - White
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
a) White solid plastic seat with lid
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
a) Flat back wash basin of size 550x400 mm.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
a) Semi rigid pipe
i) 32 mm dia
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
a) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes. Weighing not less than 60 gms.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.
a) 15 mm dia. nominal bore
b) 20 mm dia. nominal bore
c) 25 mm dia. nominal bore
d) 32 mm dia. nominal bore
e) 40 mm dia. nominal bore
f) 50 mm dia. nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work
a) 25 mm dia. nominal bore
b) 32 mm dia. nominal bore
c) 40 mm dia. nominal bore
d) 50 mm dia. nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
a) 25 mm nominal bore
b) 32 mm nominal bore.
c) 40 mm nominal bore
d) 50 mm nominal bore
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
a) 100 mm diameter
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
a) 15 mm nominal bore.
b) 20 mm nominal bore.
c) 25 mm nominal bore.
d) 32 mm nominal bore.
e) 40 mm nominal bore.
f) 50 mm nominal bore.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
a) 15 mm nominal bore
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
a) 15 mm nominal bore.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
a) 15mm nominal bore
Providing and fixing PTMT bib cock of approved quality and colour.
a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT stop cock of approved quality and colour.
a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT pillar cock of approved quality and colour .
a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms.
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
a) 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms.
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
a) 15 mm nominal bore with 45 cm length.
Repairing of leakage in main and branch water pipe lines of dia 25 to 40mm (external) as and when required i/c the cost of joining material such as cement, jute etc.
Repairing of leaking in SCI pipes immediately i/c the cost of sealing material such as jute & cement etc.
P/F G.I. nipple to existing water line all complete as per direction of Engineer-in-charge.
a)15mm nominal bore.
i) 50mm size.
ii)100mm size.
iii)150mm size
b) 20mm nominal bore:
i) 50mm size
ii)100mm size.
iii)150mm size
c) 25mm nominal bore
i) 50mm size
ii) 100mm size
iii) 150mm size
P/F G.I. nipple for PVC tank all complete as per direction of Engineer-in-charge..
a)20mm nominal bore.
b)25mmnominal bore.
Repairing of wooden door/ window frames and shutters with part replacement of wood work wherever required after taking out the shutter i/c cost of wood replaced as per direction of Engineer-in-charge, repair at each location of shutter shall be treated as one job).
Repairing of Aluminium door/ window frame and shutter with required cleat screws after taking out the shutter i/c cost of labour etc. all complete as per direction of E-in-C.
Providing and fixing of pivot in aluminium door shutter etc. all complete as per direction of E-in-C.
Providing manual assistance for plumbing sewer, masonry & carpentry work which are not covered above and are not possible to measure.
P/F 26 gauge aluminium sheet i/c necessary nails etc. complete as per direction of Engineer-in-charge.
Providing Spandle for repairing of piller cock wherever required.
P/F PVC inlet connection for flush pipe connecting with W.C. pan .
P/F C.P. brass waste Jali for sink or wash basin.
a) 32 mm dia
P/F PVC cover to over head PVC water storage tank i/c necessary nuts & bolts.
P/F stainless steel jail (grating) with or without hole for waste pipe for floor/Nahani trap.
a) 100 mm dia weight not less than 100 gms.
Cleaning of Manhole with connecting sewer line and disposal of malva out side compound etc all complete as per direction of E-in-C.
Providing unskilled labour for day to day maintenance purpose.
P/F PVC Cistern flush handle Of required colour and shape.
P/F G.I. Elbow in existing water line all complete as per direction of Engineer-in-charge.
a)15mm nominal bore.
b)20mm nominal bore.
c)25mm nominal bore.
P/F PVC Ball valve to PVC low level flushing cistern.
P/F PVC Syphon to PVC low level cistern all complete as per direction of Engineer-in-charge.
P/F gun metal gate valve with C.I. wheel of approved quality(screwed end):
a)20mm nominal bore.
P/F G.I. Tee of approved make in existing water line.
a)15mm nominal bore.
b) 20mm nominal bore.
c) 25 mm nominal bore
P/F MS bracket 40x40x5mm of size 40 cm. for fixing of wash basin and making good the same.
P/F G.I. Socket in existing water line all complete as per direction of Engineer-in-charge.
a)15mm nominal bore.
b)20mm nominal bore.
c)25mm nominal bore.
P/F SCI P trap to WC pan i/c labour charges & other fixing materials etc. all complete as per direction of Engineer_in_charge.
Replacing damaged G.I. Jali in Jali doors/windows i/c cost of material & labour all complete as per direction of Engineer-in-charge.
Removal of chockage of floor/nahani trap, Ptrap, rain water pipe G.I. Supply lines & sanitary / drainage pipe lines etc. complete as per direction of E.-in-C.
Cartage of welding machine from shop to site and sending back from site to shop including hire charges all complete as per directions of the Engr. In charge.
Welding of brocken M S items such grills, door & window frames and pivots etc complete as per direction of Engineer in charge
Dismantling wall along with tiles to repair concealed stop cock and after repairing making good the walls along with providing and fixing ceramic wall tiles and making good complete as per directions of the Engr in charge.
Uprooting and cutting plants grown on the walls of buildings i/c dismentling brick work wherever required and making the same good complete as per directios of the Engineer in Charge.
Cutting and trimming branches of trees lying on roof of building with arragement of proper ladder,scaffolding ,axes. Threads and safety precaution and all other T&P required and disposal of malawa etdc outside compound as per direction of engineer in charge.
Disposal of malba out of compound upto municipal dump by mechanical means i/c loading and unloading complete as per directios of the Engineer in Charge.
Providing services during Office hours such as dusting of table and chair of the offices, dusting and cleaning of alumiminium patition members such as boards glasses etc,delivery of letters to other offices and post office, , Filling water in air coolers, and all other functions assigned from time to time as per need basis(Payment on monthly basis)
Takingout existing aluminium partitions, doors, windows, fixed glazing and false ceiling etc by the way of dismembering the member and refixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.the same at the new location as decided by Engineer -in-charge complete in all respect .
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
Applying cement slurry admixed with water proofing chemical suchas tapecrete or equivalent in proportion as recommended by the manufacturer to damp portion of wall in two coats complete as per direction of engineer in charge
Deduct for crediting to the contractor old unserviceable material obtained after dismantentling,
a) PVC stop cock, bib cock, pillar cock etc.
b) C.P. brass stop cock, bib cock. Pillar cock angle cock etc.
c) Brass stop cock, bib cock etc.
d) Gun metal/ brass gate valve 25mm&20mmetc.
e) PVC cistern10 litre
f) C.P. shower rose & spandle
g) Flush door shutter 35/30 mm thick
h) Hydraulic door closer
i) Aluminium wtin rubber stopper
j) PVC water tank upto 500 ltr capacity
k) PVC water tank above 500ltr and upto 1000 ltr capacity
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .