Providing Water Supply Scheme Hailer Block Ajnala Distt Amritsar

Amount

Tubewell

Boring with casing pipe for tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested, equipment as required such as hand boring machine and its accessory,transportation to site and vice versa etc. complete in all respect. 0 to 150m

Supplying, lowering of MS Pipe as per IS: 4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore. (b) 150mm nominal diameter (weight 21.6 kg per meter) 5.4mm thickness

Supplying, fixing & lowering of Stainless Steel Cage type wire wound screen as per IS: 8110-2000 or latest ISI Marked, Duly welded with suitable grade S.S welding electrode to lower the strainer into tube well bore. (i) 150mm Steel Strainer (slot size 0.15mm) 5.00 mm thickness

Supplying, fixing and lowering of stainless steel socket as per IS 8110-2000 or latest, ISI Marked duly welded with suitable grade SS Welding electrode to lower the strainer into tubewell bore complete in all respect (b) 150mm internal diameter

Supplying, Lowering & fixing of M.S. special socket to connect S.S. Strainer to M.S. Pipe duly welded with suitable grade (b) 150 mm internal diameter

Supplying at site Wooden box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.

Collection of water sample from different strata and testing of sample from approved laboratory (Physical & chemical Analysis)

Supplying and fixing M.S well cap having thread to fix on housing pipe complete in all respect (c) 150 mm internal diameter

Supplying & fixing of bail plug of M.S. pipe complete with inverted U-hook attached to the bottom plug complete in all respect. (b) 150mm internal diameter (weight 21.6 kg per meter) 5.4 mm thickness

Supplying & fixing of M.S. Clamp of size 150mm x 12mm made out of MS Flat 1.52 m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Development of stabilizing of the tube well with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. (a) Capacity of Air compressor 300 cfm at 250 PSI

Development of stabilizing of the tube well with submersible pump of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)

DISTRIBUTION SYSTEM

Providing, Stringing out PVC pipes ISI-4985 finolex/Supreme/Jain Irrigation / Kissan mouldings casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, Jointing and testing complete as per specifications for less than 3 mtr street width(Manually) including the cost of excavation ) PVC pipe 63mm o/d

Providing, Stringing out PVC pipes ISI-4985 finolex/Supreme/Jain Irrigation / Kissan mouldings casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, Jointing and testing complete as per specifications for More than 3 mtr street width(Mechnically) (6 Kg/cm2) including cost of excavation ) 63mm o/d

Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex / Prince casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing, including excavation complete as per specifications 90mm o/d PVC pipe of 10kg/sqm2

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting. 63mm o/d

Road crossing through horizontal boring by bockiey

Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy pattern) as per IS 778 with hand wheels, on GI Pipe lines laid in the ground or inside buildings including all carriages complete 50MM i/d Gun Metal peet valve heavy pattern

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge) 80 mm I/d

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete 4No. with Each 3kg I.e (1 x 3 = 3kg)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department with each of Size 0.6m x 0.6m

House Service Connections

House Hold Water connection and water meter i) Provision for providing and fixing 1 No water meter ISI marked of best Indian make ii) Providing Laying, Jointing, Cutting, Testing and excavation of 15mm i/d GI pipe including the cost of GM ferule complete in all respect (For House hold connection form service pipe to house) Complete as per Analysis and Drawing Attached

Chlorinator

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

PUMP CHAMBER WITH TOILET BLOCK

Construction of Pump Chamber (Size 2.20x2.20) with toilet block including cost of electric wiring & sanitary installations as per standard design complete in all respect.

PUMPING MACHINERY

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 60 LPM against a head of 53.00 mtr along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including M.S. Column Pipe of suitable size 50 mm = 50 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respects as per standard Specifications.

Motor with pump

Panel Board

Cable (size= 2.50 mm2 (100 mtr))

Column Pipe (G.I) (50 mm i/d = 50 mtrs)

C.I. FITING INSIDE PUMP CHAMBER

Providing and installing 80mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects as Annexure A12 – 2 & Drawings D-12 & D-17.

DEVELOPMENT OF WATER WORKS SITE

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8 (as per Analysis A-6)

Providing and fixing precast prestressed cement concrete fencing pole with 6ft height 3"x3" top and 4"x3" base provided with 3 Nos. hooks Including cost of excavation, sand filling and errection complete in all respects

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-3.

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing with including D-4 & Analysis A-4 complete in all respects

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-7 & Analysis A-10.

Providing & fixing MS Sign Board as per standard size of DWSS as per analysis A-24 & Drawing D-20

Environmental Works

Making lawns including ploughing & dragging with 'Sohaga' breaking of clods, removal of earth rubbish dressing & Supplying doob grass roots and planting at 15 cm. apart including Supplying and spreading of farm yard manure@ 0.18 cum per 100 sqm & loosening.

Supplying and Planting prmanent trees including digging of eirth pits size 75x75x75 cm deep refilling the excavated eirth with manure supplyed @0.113cum each and watring supplying through tractor tanker(trees like Neem, Ashoka, Dake, arjun etc.)

Planting ground cover plants including digging and refilling of beds with excavated soil and FYM, Fertilizer and insecticides, planting of saplings at 30cm distance from plant to plant and row to row, providing and fixing brick tiles edging.

Planting, flower beds including digging and refilling of beds with excavated soil and FYM, fertilizer and insecticides, plating of sapling at 30cm distance from plant to plat and row to row.

Provision for Floor Trap with Khurra

OPERATION & MAINTENANCE

Operation & Maintenance of entire water supply scheme including Salary of Operating Staff, Energy Charges, Sodium Hypochlorite, Solutions and any consumables, repair of structures, distribution system , minor repair of machinery, lawns with fine grassing & ornamental plants with manure & watering etc for 3 Months