SPL REPAIR TO TOILETS AND BATHROOMS OF BLDG NO P-221 AND P-225 AT 16 RAJPUT UNDER GE (EAST) LUCKNOW.

Amount

Taking down cement or cement lime plaster any description from brick or stone walls/ceiling etc including raking out joints, hacking for key & scrubbing down with water all as specified.

M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 fair surface of ceiling finished surface even and smooth without using extra cement all as specified and directed.

M&L for Preparation of new or previously undercoated surface of ceiling and applying two coats of white wash on ceiling all as specified and directed.

M&L for Preparation of new or previously undercoated surface of wall and applying two coats of white wash all as specified and directed.

Prepration of new surface of wall and applying two coats of cement based paint white or tinted complete all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area exc 1.5 Sqm but n.exc 4 sqm each all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area n.exc 1.5 Sqm each all as specified.

S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down Make: Jindal/TATA.

S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down Make: Jindal/TATA.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, all as specified and directed

M&L Glazed ceramic tiles (coloured) in vertical surfaces 300x450x7mm /600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

S&F 85x45mm single rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. Make: Rajshree/Sintex

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately

S&F Factory made 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both side 14 micron Flush door shutter wit 10mm deep CNC moulding design of required size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F sheet glass 4mm thick glass is grounded or abscured or frosted, on one side complete all as specified.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, all as directed.

S&F 250 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts all as specified

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 125 mm size aluminium alloy handles fabricated type extruded section ,ISI marked all as specified

S&F 150 mm size aluminium alloy handles fabricated type extruded section ,ISI marked all as specified

S&F Butt hinges 125 mm stainless steel hinges medium weight and fixed

S&F Butt hinges 100 mm extruded aluminium alloy with galvanised mild steel hinges pin anodised type B-21 and fixed to PVC frame

M&L for preparation of old wood based materials of any description over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of New steel surface of any description not otherwise described over 10 cm width or girth and apply two coat synthetic enamel paint complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ). and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints add if fixed in repairs.Make :Cera/Periware/Hindware

S&F Plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

S&F in repair Vitreous china squatting pan Orissa pattern size 580x440 mm white with P or S trap front or back inlet with integral foot rests (excluding flushing cistern and flush pipe ) complete including provision of lime concrete bedding.

S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made Make : Parry ware/Slimline/ Cera

S&F in repair Vitreous china wash hand basin white angle back size 550x400 mm including 32 mm dia CP waste coupling long screwed shank fly nut flanged end and embedded in lead to waste pipe excluding piller taps complete fixed specified and directed by enginner -in-charge Make : CERA/Peryware/Hindware

S&F in repair Vitreous china urinal, Half stal type white(excluding flushing cistern flushpipe and washte pipe) compete including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws pointing around urinal back with wasre pipe complete all specified & directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall including down all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall all as specified and directed by Engineer-in-charge.

S&F 110mm PVC (SWR) junction single (single T) equal or unequal

S&F 110mm bore PVC (SWR) bends, any radius.

S&F 110mm bore PVC (SWR) bent cowl, any radius.

S&F PVC (SWR) bends any radius of 75 mm dia all as specified.

S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement

S&F 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions

S&F in repair 15 mm dia Pillar tap cast copper alloy chromium plated fancy type with capstan head and cup screwed down screwed for G I pipe or for brass ferrule all as specified.

S&F in repair CP concealed stop cock for 15 mm bore pipe fixed.

S&F 15mm dia fancy type chromium plated angle valve/cast copper ally screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to GI Pipe.

S&F in repair health feucet to EWC CP brass with minimum 1500mm long CP flexible pipe connection etc, complete all as approved Make : Parryware Cat No T9940A1 or equvailent .

S&F in repairs 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner all as specified.Make: Jaguar /ESS-ESS/Prayag

S&F 125 mm dia CP brass shower rose with or without swivel joints any size including fixing to steel pipe or union add if fixed in repair all as specified and directed.

S&F as in repair CP soap dish any type fixed to plugs with chromium plated brass screws all as specified.

S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats

S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality all as specified.PTMT nuts fixed as in repair.

S&F in repairs 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms)

Demolition of sunken floor treatment of WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab as follows:- (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with chemical " PIDIPROFF LW of Dr Pidilite or equivalent " as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia GI Pipe 650mm long at bottom of the sunken floor and wraping of bath seal tape on the pipes inserted through walls to floor area and seal it (Bath seal tape product of Dr fixit or equivalent and grouting around the inserted pipes by pouring Dr fixit bath seal or equivalent grout as directed (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP or equivalenont all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC or equivalent of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from top of floor level slab and allow it dry completely. (f) Fill the sanitary gaps with sealing compounds complete

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete, all as specified.

M&L cement concrete type E-2 1:5:10 (40mm brick aggregate)/cinder filling in sunken floor portion in WC/Bath as specified and directed by Engr-in Charge

M& L for Cement concrete type C2 1:2:4 (40 mm graded agg) as in foundation mass concrete complete all as sepcified.

S&F in repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified.

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures(DBs,submain,cables etc) all as specified and directed by Engineer-in-charge.

Taking down carefully Submain wiring any size complete including all electrical fittings & fixtures etc all as specified and directed by Engineer-in-charge.

Taking down carefully any Light fittings/fixtures/Ceiling fan/wall fan/Ex fan any size complete including all (electrical fittings & fixtures etc) all as specified and directed by Engineer-in-charge.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators as per specified SSR and as directed by Engineer- in- Charge. . NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per Item No 64 hereinbefore but for One 5 A socket outlet on independent Board all as specified and directed.

All as per Item No 64 hereinbefore but for One 5 A socket outlet on same Board all as specified and directed.

All as per Item No 64 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

S&F switch piano flush type 5 Amp one way single pole, 240 volts complete all as specified and directed.

S&F socket outlet 5 Amp 5 Pin 240 volt flush type complete all as specified and directed.

S&F switch socket outlet two in one 5 & 15 Amp 6 pin multipurpose combination complete all as specified and directed.

Supply and fix PVC Ceiling rose polycarbonate all as specified.

Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, Make- Philips or Eqv to Havells/Bajaj

Supply and fix Mirror light ,wall spot/Display/picture light with adjustable head and colour changing fucntion 10W all as per directed.

Supply and fixing surface mounting LED light fitting of 20/25 watt white powder coated CRCA housing with LEDs.,efficacy 100 lumen/watt,CRI>80 and pf>0.9,surge protection 2.5 KV, Seamless front frame with flat white high transmission acrylic cover all as specified and directed by engineer in charge. Make- Philips or Eqv to Havells/Bajaj

Supply and fix in replacement of integrated LED bulk head fitting 10 Watt, 100 lm/wat ,6500K with IP 65 &ik-08 protection comprises of polycarbonate cover, etc complete all as specified and directed.

Supply and fix 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 incl MS Clamps and bracket of 40mm dia and farsnut for fixing the light all as specified and directed by engineer in charge. Make- Philips Model No- UrbanedgeD2DBR501 or Eqv to Havells/Bajaj

Supply and fix in rep[air of MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fix MCB SP 230V, 6-32 Amps capacity all as specified and directed.

Supply and fix MCB SPN 230V, 6-32 Amps capacity all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB all as specified and directed

Supply and fixing storage water heater (Geyser) of capacity 50 ltrs, 230 volts, power consumtion 230V, vertical type, Rated pressure 5.6 bar pressure rating more than 8 bar suitable for high rise buildings,rust and shock proof ABS Outer body for lomg life,Stainless steel inner tank of 304 grade,65 MPa bar pressure,automatic shut off including four nos of rag bolts and making the elctrical / water supply connection including testing after installation complete all as specified and directed by Engr-in-Charge. Make-HAVELLS or Eqv of Jaguar

Supply and fixing steel body Ex-fan 450 mm sweep AC single phase, 230/240 volts 50 Hz with louvers incl cutting of suitable holes and matching with the existing colour of wall and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm all as specified and directed. Make:- Bajaj/Havells/Crompton/Usha

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth.

M R CONSTRUCTION (BID ID -3283616)

M/S KAUSHIK CONSTRUCTION (BID ID -3279624)

QUALITY CONSTRUCTIONS CO (BID ID -3280198)

m/s raghubar dayal (BID ID -3280292)

M/s SNS Construction (BID ID -3280070)