Shifting of 33 KV feeder line at Industrial Area Babrala Distt. Sambhal

S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto apron upto switch board 30 cm square box with hinged cover masonry enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I as per UPPWD Sch. No. 701

Supply & erection of stay of HT lines for ST pole with GI anchor plate (152x152x6mm) stay rod (16mm dia x 1.85 m long) GI stay bow (16 mm dia rod, thimble, double stay tightener, clamps & stay wire (GS 7/3.15 mm) including grouting in 1:4:8 ratio of cement concrete using coarse sand, over burnt brick ballast as per direction of engineer in charge complete in all respect as per SIDC Sch. No. 06.01

Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint on length of above 10 M. support above the ground level or as per direction of Engineer in-charge of work/site including all T&P , men & material for proper completion of work as per UPSIDC Sch. No. 20.2

Supply & fixing anticlimbing device fabricated from G.I. flat of 25mm x 6 mm size in a shape of the pole size, having G.I.flat pointed fins of length 225 mm in 8 nos. and also barbed wire in 200 mm length above the said ring including material complete in all respect as per UPSIDC Sch. No.26.1

Supply & fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E. Rules as per UPPWD 1109

Supply & Erection of Double Pole structure consisting of 410-SP-56, 11 Mtr. Long S.T.Pole including fittings and mounting, T&P, men & material for proper completion of work.as per SIDC Sch. No. ER 04.1.2

Supply and laying of 300 sq. mm 3 core, 33 KV HT cable standard aluminium conductor XLPE (cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part II with latest amendments) 33 KV grade at a depth of 1000 mm below ground level in existing hume pipe. The armouring of cable shall be properly connected with earth conductor by clamps etc. (Gloster/Havells/Grandlay/Polycab/KEI make)

Supply & fixing of 150 mm dia GI pipe B Class for climbing up the cable from ground to over head line including all accessories material labour and T & P required for proper completion of work as per specification complete as per SIDC Sch. No. 25

Supply and fixing of push on type (MPO-5) jointing kit suitable for 300 sq. mm 3 core 33KV HT cable outdoor type including all materials, labour and T&P required for proper completion of work

Supply & Laying of 160 mm dia DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete in all respect.