REPAIR AND REPLACEMENT OF ELECTRIC, WIRING, LIGHT FITTINGS AND CONNECTED E/M ITEMS UNDER SANYAT LINE SERVICE CENTRE UNDER GE EAST

Amount

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches,Sockets, holders,ceiling roses,light fitting regulators etc ( to be measured separately) and making good the disturbed surface all as directed.

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and in existing MS box/modular box covered with existing hylem sheet / modular plate (top cover) for mounting switches, sockets or fan regulators etc for the following :-

One light point/ fan point/ bell point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One light point controlled by two 2 way switches

All as per item No.2 here in before but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let on independent board.

S&F in repair switch piano flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair switch piano flush type, 6 amps two way,SP,230 volts AC all as directed.

S&F in repair switch piano flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F in repair switch piano bell push flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair socket outlet 6 amps 5 pin , all as directed.

S&F in repair socket outlet 6&16 amps 6 pin all as directed.

S&F in repair piano type Step fan regulator, 120 watts single/ double module all as directed.

S&F in repair modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair modular switch flush type, 6 amps two way,SP,230 volts AC all as directed.

S&F in repair modular switch flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F in repair modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair modular socket outlet 6 amps 5 pin 2 module all as directed.

S&F in repair modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed.

S&F in repair modular Step Fan regulator, 120 watts single / double module all as directed.

S&F in repair Modular white cover plate with frame 1 module all as directed

S&F in repair Modular white cover plate with frame 2 module all as directed

S&F in repair Modular white cover plate with frame 3 module all as directed

S&F in repair Modular white cover plate with frame 4 module all as directed

S&F in repair Modular white cover plate with frame 6 module all as directed

S&F in repair Modular white cover plate with frame 12 module all as directed

S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

Supply and fixing in replacement of lamp holder PVC/ Polycarbonate type insulated body with back plate suitable for batten fittings complete all as specifed and as directed.

Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts complete all as specified and as directed,

Supply and fixing in replacement of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed.

Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed

Material and labour for replacement of submain wiring complete with 2 x 10.0 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 10 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed.

Material and labour for replacement of submain wiring complete with 2 x 16.0 sqmm (nominal area) FRL, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement Isolator SPN 40 A including connections complete all as specified

Supply and fixing in replacement Isolator SPN 63 A including connections complete all as specified

All as srl item no 37 here in before but of 40 amps capacity and TPN type.

All as srl item no 37 here in before but of 63 amps capacity and TPN type.

All as srl item no 37 here in before but of 100 amps capacity and TPN type.

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

Supply and fixing of PVC casing & caping ( ISI marked) 20 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc complete all as directed.

Supply and fixing of PVC casing & caping ( ISI marked) 25 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc complete all as directed.

S&F in replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.

S&F in replacement of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.

Supply and fixing in replacement of wall light fitting suitable for LED lamp complete all as directed.

Supply and fixing in replacement of LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and directed.

S & F in replacement LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and directed.

S & F in replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed.

S&F in replacement of bulk head fitting 6.5 W with PMMA diffuser complete all as specified and directed.

Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED ceiling light fitting 10 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED ceiling light fitting 6 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of light fitting comprising of milky white PVC globe dia 200 mm and gallary suitable for mounting on 32/40 mm GI pipe suitable for LED lamp and B22 base including necessary electric connections complete all as specified and as directed.

Supply and fixing in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 25 Watt incl LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as directed.

S & F in replacement of LED Bollard Fittings 10W suitable for pathway lights incl making electric connections complete all as specified and directed.

S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing in replacement of area lighting LED flood fitting 120W complete all as specified and as directed.

S&F in replacement of Recess/Surface mounting 2x2 square flat panel ultra slim scoop LED light 36 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.

S & F in replacement garden light pole GI pipe medium grade 40mm dia cut to length,suitable for fixing of garden light fitting including painting with black synthetic enamel paint (2 coat) over a coat of red oxide primer complete all as specified and directed.

Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fixing in replacement of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.

Supply and fixing in replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.

Supply and fixing in replacement of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections and depositing the old u/s to MES store yard complete all as directed.

Supply and fix in replacement of motor copper wound with threaded PVC cover suitable for 200/250mm ventilation fan complete all as specified and as directed.

M&L for rewinding of exhaust fan(300mm)/wall mounting fan(400mm) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

M&L for rewinding of exhaust fan(380/450mm) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

M&L for rewinding of Ceiling fan 1200/1400mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

Supply and fixing exhaust fan upto 300 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard.

S & F in replacement plastic body capacitor of capacity 2.5 mfd with wire suitable for single phase motor and making connection complete all as specified and directed

All as per Srl item No 70 above but 3.15 mfd capacity.

All as per Srl item No. 70 above but 4.0 mfd capacity.

S&F in replacement of ball bearing No 6201/6202 suitable for ceiling fan complete all as specified and directed.

M & L for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed

S&F MS clamp with rubber real including nut, bolt and split suitable for ceiling fan to hook complete all as specified and as directed.

S&F PVC Gang Box suitable for one No 5 Amps Switch and one No 5 Amps Socket complete all as specified and as directed.

S&F PVC Gang Box suitable for two No 5 Amps Switch and two No 5 Amps Socket complete all as specified and as directed.

S&F PVC Gang Box suitable for one No 15 Amps Switch and one No 15 Amps Socket complete all as specified and as directed. Make : Presto plast/Pressfit/Polyplast.

S&F Steel fastneer of 4" long and 8mm dia with Nuts & washer complete all as specified and as directed.

S & F in replacement of MCCB, 415 volts, three pole of cap 100/125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

All as per item No. 80 here in before but of capacity 160 Amps, 25 KA.

All as per item No. 80 here in before but of capacity 200 Amps, 36 KA.

S & F in replacement of aluminium cable 1100 Volt grade, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable circular of size 4 Sqmm ISI marked in service connections, including taking down old unserviceble cable complete all as directed.

All as per srl item No. 83 here-in-before but with 6.0 sq mm ISI marked in service connections, including taking down old unserviceble cable complete all as directed.

S & F in replacement of plug top 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed.

S & F in replacement of socket 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed.

S&F PVC top, 3 pin 15 Amps, 230 Volts, 50 Hz.

Supply and fixing in replacement of 'T' cover Bakelite sheet 2 mm thick in round shape complete all as specified.

Supply and fixing in replacement of Bakelite sheet 3mm thick of size 5"x5" duly wire cut for switches, sockets, regulator etc as per site requirement as directed.

S&F in replacement of Bakelite sheet 3mm thick of size 8"x5" duly wire cut for switches, sockets, regulator etc as per site requirement as directed.

S&F in replacement of Bakelite sheet 3mm thick of size 8"x10"duly wire cut for switches, sockets, regulator etc as per site requirement all as directed.

S&F in replacement of Bakelite sheet 3mm thick of size 10"x12" duly wire cut for switches, sockets, regulator etc as per site requirement all as directed.

Taking down old unserviceable LT U/G cable any size and core complete all as specified.

S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 10 Sqmm 2 core.

All as per item sl No 94 but 16 sqmm, 2 core.

All as per item sl No 94 but 16 sqmm, 4 core.

All as per item sl No 94 but 25 sqmm, 4 core.

All as per item sl No 94 but 50 sqmm, 3 1/2 core.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides complete all as directed.

Material and labour for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as directed.

Removal of excavated material n exc 50m and depositing n exc 1.5m above starting point complete all as specified and as directed..

M&L Cement concrete in foundations, filling and mass conc in ratio 1:3:6 type C2 with 40mm stone graded complete all as specified.

S&F Galvanised Steel tubing light grade for road crossing, passing cable etc of size 50mm bore.

Supply and fix Industrial Switchgear Busbar Chambers, current rating 100 Amps, 4 Way with 04 Nos copper busbar complete all as sfd.

Supply and fix Industrial Switchgear Busbar Chambers, current rating 200 Amps, 4 Way with 04 Nos copper busbar complete all as sfd.

Supply and fix Industrial Switchgear Busbar Chambers, current rating 400 Amps, 4 Way with 04 Nos copper busbar complete all as sfd

Supply and fix in replacement of Sheet Metal MCCB box with top cover suitable for fixing MCCB, 3/4 Pole Upto 400Amps. Note : MCCB will be measured and paid separately.

S&F of MCB DB confirming to IP 43 - IK 09 with double door, SPN 12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S&F of MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S&F of MCB DB confirming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

S&F in replacement of TPN DB 04 way double door confirming to IP43 & IK 09 protection complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

Supply and fixing in replacement of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including taking down the old u/s geyser and depositing to MES store yard complete all as specifed and directed.

Supply and fixing in replacement of heating element 1.5/2 KW capacity round/triangular type for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta/Venus/Bajaj. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Supply and fixing in replacement of heating element 1.5/2 KW capacity banana type for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Supply and fixing in replacement of heating element 1.5/2 KW capacity round/square/triangular type having provision for thermostat inside for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Supply and fixing in replacement of thermostat ISI marked for geyser of any type/Make and capacity as per sample, including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta/Bajaj/Venus

M &L in replacement Stainless steel Geyser tank 25/35 Ltr capacity suitable for fixing in 6/9 nut assembly complete all as specified and directed.

M &L in replacement Stainless steel Geyser tank 50 Ltr capacity suitable for fixing in 6/9 nut assembly complete all as specified and directed.

M &L in replacement of base plate assembly of 6/9 holes suitable for fixing on a geyser tank 25/35/50 Ltr capacity incl Nuts & rubber packing for water tight joint complete all as specified and directed.

Supply and fixing in replacement of steel wired connection 600mm long and C P brass adopter 10 mm dia with washer for geyser of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of CP non return valve in position internally screwed on one end and externally screwed on other ends, suitable for iron pipe of size 15mm dia, suitable for geyser of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of fuseable type pressure valve, suitable for geysers of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of indicator lamp red/green suitable for geyser of any type/Make and capacity including making necessary electric connections and testing complete all as directed.

M&L for soldering & brazing of inner copper tank of size 25/35/50 Ltrs and refixing it into the geyser complete all as specified.

Attending complaint at site related to electrical or plumbing fault and making the high pressure booster pump functioonal including replacement of minor spares like nut, bolts, clamps, screws, gasket and pieces of cable etc complete all as specified and directedNote: Major items covered under "supply only" in the suceeding items of schedule.

Supply only of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.50 HP, 230 volts, single phase, 50 Hz incl Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed. Make: Usha/Crompton/V Gard/Khaitan/CR/Leader/Accord

Supply only of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.93/1 HP, 230 volts, single phase, 50 Hz incl. Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed. Make: Lubi/Crompton/V Gard/Khaitan/CR/Leader.

Supply only pressure cylinder of capacity 8L suitable for 0.5 to 1 HP Booster pump complete all as specified.

Supply only Pressure Guage 50mm dia suitable for pressure vessel radial. 0-180 Psi Pressure Range complete all as specified and directed. Make:- Fiebig/AE

Supply only 5 port Brass Splitter Manifold Distributor 1 inch 1/4" for pressure Vessel Expansion suitable for Booster Pump upto 1 Hp capacity complete all as specified and directed.

Supply only Booster Pump relay SK9/ PM5 type, 240 Volts, 50Hz suitable for 0.5HP to 1 HP booter pump complete all as sfd. Make:- Danfoss/Zerodis

Supply only Booster Pump relay KP 35/36, 240 Volts, 50Hz suitable for 0.5HP to 1 HP booter pump complete all as sfd. Make:- Danfoss

Supply only spring loaded non-return valve/Check valve of suitable size for fixing in suction line of booster pump upto 1 HP capacity complete all as specified.

Taking out burnt motor motor of capacity 0.5 HP and refixing in position after rewinding with super enamelled copper wire of required size and F class insulation duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

Taking out burnt motor motor of capacity 0..98/ 1 HP and refixing in position after rewinding with super enamelled copper wire of required size and F class insulation duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

Supply and fixing in replacement on walls/ceiling / in floors etc CPVC pipe SDR11 and plain CPVC SDR 11 fittings of external dia 25 mm complete all as specified and as directed

Supply and fixing in replacement of CPVC stop value suitable for 25mm external dia CPVC pipe complete all as specified and as directed

S & F in replacement of PVC flexible pipe 20mm dia complete all as specified and directed.

S& F in replacement of Static Energy Meter single phase electronic type with LCD display of capacity 10-60A including connection with seal and sealing wire including taking out the old u/s and depositing to MES store yard complete all as specified and as directed Make Benlo/L&T/Havells/HPL

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Supply and fixing in replacement of LED ceiling light fitting 24 watt, in square shape, surface cum recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

NAVEEN TRADERS

m/s VK construction company

Surjit and Sons