REPAIR TO RETAINING WALL FOOTPATH CULVERTS FENCING GATE AND COMPOUND WALL WITH DRAIN IN COE HQ CE 31 ZONE 216 TC AND R CENTER UNDER AGE BR III AT BB CANTT SRINAGAR

Amount

Dismantling of two way trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed.

M&L for second class soft wood wrought, 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round complete all as specified and directed.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches, pillars, etc complete all as specified and directed.

M&L for Precast cement concrete 1:3:6 (using 16mm graded crushed stone aggregates) in hollow block masonry exc. 10 cm in width and setting in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC (1:2:4), Type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling timber in scantling 40 sqcm and over in section in any position in framed work complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

Demolition of RCC (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for precast RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles including necessary formwork complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standard rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed. Note : Actual weight of the fencing shall be ascertained by Board of Officers to be convened by GE.

M&L for chequered cement concrete tiles with white cement and pigment of size 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment laid over and including sand cushion as per site requirement complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base/levelling course of floors etc complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) dia of neck 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10cm long complete all as specified and as directed.

M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for factory made precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) in road side kerb stone of approved size and shape including necessary form work and setting in CM 1:4 complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of acrylic exterior emulsion paint over a coat of suitable primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for walling of random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm of granite or trap stone complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble uncoursed or brought upto course stone masonry in CM (1:4) complete all as specified and directed.

M/S Himalayan Construction and Co.

M/s Lal Enterprises

M/S Vivek Gupta and Co

D N ENTERPRISES

M/S SUHEEL CONSTRUCTIONS

Alishan Builders

M/S AIJAZ ENTERPRISES