CA No CWE/FZR-55/2019-20 Special Repair to Bldg No E-11 at Fd Wksp Coy of EME Bn under GE (West) Ferozepur Cantt

Amount

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings complete all as specified.

Dismantling wrought iron or mild steel work of any description and in any position, complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall at a height of 6m to 18m, ISI approvred fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

All as per item no 3, but 0.80mm thick plain sheets in ridges, valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed

Dismantling of plain or corrugated any type of sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified.

S&F 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 in any shape (trapezodial/circular, drip and straight flashings) and fixed to steel members with plain 40mm lap joints or welded/rivetted complete all as specified and as directed by Engr-in-Charge.

S&F MS flat as in wind ties for roof including drilling holes, securing bolts etc and similar work, complete all as specified.

M&L Cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in coping, bed plates etc including form work,weathering, slightly rounded or chamfered complete all as specified.

S&F aluminium wind driven turbo ventilator 600mm dia for roof top at height 10 to 18 m from floor level including aluminium vortex blades (42 nos vanes of 0.5 mm thickness) turbine shaft, horizontal & vertical bracing of SS 304, double shielded ball bearing, complete all as specified as per manufacture instruction

S&F Mild Steel Framed work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified.

S&F Mild Steel Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. including fabrication, erraction and fixing, complete all as specified.

M&L for removing loose and broken concrete by chiseling/picking etc upto a depth of 20 to 40mm from floor/roof slab and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50m complete all as specified and directed by Engineer-in-Charge, including necessary scaffolding etc complete.

M&L for applying one coat of anti corrosive primer as per manufacturers insturctions to exposed old and new reinforcement to the full circumferences and length of bars to form unbroken 40micron thick film in the area prepared vide item no 12 above complete all as specified and directed by Eng-in-Charge.

M&L for application of high build polymer modified to floor and vertical wall up to sunken portion with cement mortar Plaster (1:3) with Liquid WPC per bag of cement applied as per manufacturer's instrutions, complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

S&F in repair rough cast wired glass, 6.40mm thick and glazing with oil putty in square n.exc 0.5 Sqm fitted in existing steel frame work in squares n.exc 0.50 Sqm, complete all as specified.

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, complete all as specified.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified.

S & F gypsum board 8 to 9 mm thick in ceiling at height 3m to 18m from floor level fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm, main tee 38mmX23mm, Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified. Note:-The hanging stay wire shall not be less than 4.00mm thick all are included in the above mentioned item only.

M&L for Cutting holes in brick walls exc half bricks but not exc one brick built in cement mortar and stone walls built in lime mortar, complete all as specified.

Taking down door shutter of any description, exc 1 Sqm but not exceeding 2 sqm each and removing to stores, complete all as specified.

S&F anodised aluminium door, window, ventilator frame with side hung/including sliding aluminium sections sliding window where required or pull and push type in frames and shutters with two track sliding aluminium frame and in partitions, make: Jindal (or) Equivalent make of approved size including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc complete all as specified as per manufacturers instructions. Note : Glass pane and EPDM Rubber beading/gasketwill be measured and paid seperately.

S&F EPDM Rubber beading of suitable size around glass in aluminium windows /ventilator shutters, complete all as specified.

S&F anodized aluminium alloy barrel tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F 150mm long pressed handles, extruded aluminium alloy fixed with steel screws, complete all as specified.

M&L for 5.5mm thick antilo sheet glass ordinary quality and glazing, with aluminium beads & rubber gaskets (supplied alongwith shutters), in squares n.exc 0.50 Sqm in each pane, complete all as specified.

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination white lamination, fixed with screws to alluminium frame work complete all as specified and directed by Engineer in Charge.

S&F 4 lever aluminium mortice lock,vertical type size 100 mm complete all as specified.

S&F 125mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified.

S&F hydraulically extruded aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified.

M&L for Non skid Ceramic coloured ( colour and shade as approved) tiles,any shape, 7mm to 8 mm thick area of each tile exc. 0.11 sqm and not exc 0.18 sqm as in flooring set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6), complete all as specified.

All as per Item No-32, herein before but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified.

M&L for Glazed ceramic tiles, coloured (colour & shade as approved), of size 300x200x7 mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over & including 10 mm thick rendering in cement mortar (1:4), complete all as specified.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius, complete all as specified.

All as per item 36 hereinbefore but using old bricks retrieved from demolition under item 35 hereinbefore including cleaning and removal of mortar from old bricks complete all as specified.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

M&L for Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, mixed with WPC (WPC shall be measured and paid seaparately), finished even and smooth without using extra cement, complete all as specified.

M&L for Rendering 10 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L Rendering 5 mm thick in cement mortar (1:3) on ceiling concrete surfaces finished even and smooth without using extra cement, complete all as specified.

M&L Cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) at junctions of chajjas etc including form work, weathering, slightly rounded or chamfered complete all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level), complete all as specified.

M&L for 100mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring including provision of construction joints surfaces finished even and smooth without using extra cement, complete all as specified.

M&L for Forming 12mm thick Expansion joints upto 100mm thick flooring filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, complete all as specified.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, and brushing neat cement slurry @3 kg/Sqm etc complete all as specified.

S&F for 20mm wide Aluminium dividing strips, 1.5mm thick, inserted in position, conform to design, complete all as specified.

M&L for 20mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings @ 7.1 Kg/Sqm, and finished even and smooth, complete all as specified. Note: Metallic hardner shall be measured separately.

Supply only Metallic floor hardner, complete all as specified.

M&L Hardcore of broken bricks of gauge not exc 63mm, deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface below sunken portion, complete all as specified.

S&F 60 mm thick (M-35 Grade) factory made, machine pressed,precast cement concrete interlocking paver block any shape with grey cement and pigment, confirming to IS-15658:2006, set and joints grouted in fine sand, laid over and including 25 mm thick layer of sand cushioning, complete all as specified and as directed.

Demolition of reinforced cement concrete in any position, complete all as specified.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in cover slab including necessary form work and setting in CM (1:4), complete all as specified.

S&F Mild steel TMT bars 10mm dia cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends, as in stirrups,spacers, binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete, FE-500/550 confirming to IS-1786-1985 all as specified & directed.

S&F 1.25mm thickness of laths of steel rolling shutters of gear operated type with bevel gear box and crank handle with out ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete all as specified and directed by Engineer-in-Charge. Note:- Ball bearing for rolling shutters will be measured separately.

S&F 1.25mm thickness of laths of steel rolling shutters with out ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated pushpull or manual type, complete all as specified and directed by Engineer-in-Charge.

S&F ball bearing for rolling shutters, complete all as specified and directed by Engineer-in-Charge.

S&F bottom plate/patty 3 mm thick 125mm height including side lock at both end for rolling shutter of any type and description, fixed in position complete all as directed by Engr-in-Charge.

S&F safety lever locks mild steel with 4 levers and fixed in repairs for rolling shutters, complete all as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified.

S&F 160 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes, complete all as specified.

S&F in repairs 160 mm bore PVC (SWR) couplers any radius fixed to walls including distance pieces and stack clamps, including making good around complete all as specified.

S&F in repairs 160 mm bore PVC (SWR) bends/shoe and provided with access door any radius fixed to walls including distance pieces and stack clamps, including making good around complete all as specified.

S&F 160 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified.

Taking up or down existing steel water tubing, 15 mm bore alongwith connections fixed/laid in any situation, complete all as specified

Taking up or down existing steel water tubing, 20 mm bore alongwith connections fixed/laid in any situation, complete all as specified.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceiling, complete all as specified.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings,complete all as specified.

Re-Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings fixing to wall/ceiling or laid in floors complete all as specified.

Re-Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified.

S&F in repair 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified.

Dismantling CI pipe alongwith fittings of 50/75/100mm bore, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and incld stack clamps with nuts & bolts, complete all as specified.

All as per item no 72, but laid in trenches or in floors, complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) bends/shoe and provided with access door any radius fixed to walls including distance pieces and stack clamps, including making good around complete all as specified.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) vent cowl, complete all as specified.

S&F in repairs, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including distance pieces, complete all as specified.

S&F in repairs 75 mm bore PVC (SWR) bends/shoe and provided with access door any radius fixed to walls including distance pieces and stack clamps, including making good around complete all as specified.

S&F in repair 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule, complete all as specified.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing on vertical surfaces such as in skirting/dado, urinal patition and all other similar works & including 15 mm thick screed in cement mortar (1:4), complete all as specified.

S&F in reapir Vitreous China urinal half stall type, white urinal, bowl type basin with grating and union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, flush pipe, complete all as specified.

S&F in repair Vitreous china white squatting pan orissa pattern of size 580mm x 440mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified.

S&F in repair Vitreous china white wash down water closet (pedestal pattern) including PVC sheet cover, and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, complete all as specified.

S&F in repairs PVC syphonic action type low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, 32 mm PVC flush pipe and necessary fixing arrangements and connecting to water pipe, complete all as specified .

S&F in repairs wash hand basin, flat back 550mm x 400mm vitreous china (white) including PTMT waste coupling/fittings, 32 mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing, complete all as specified.

S&F in repair 15mm bore pillar tap, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F in repairs PVC connection 15mm size with brass nuts on both ends, 450mm long, complete all as specified.

S&F in repair 15 mm bore bib tap of, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle, complete all as specified.

S&F in repair, 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

S&F in repair 15mm stop cock cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy type shank and cup, complete all as specified.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified.

M&L for Taking down wooden/steel chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,making good jambs with plaster in CM(1:4) to match with existing finish, complete all as specified.

M&L Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

M&L Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with/wihout glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

M&L for forming jambs etc built in cement mortor 1:6 to openings including cutting toothing and properly bonding into to old work also facing, jointing and pointing to match to existing work complete all as specified.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified .

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S&F Factory made solid PVC door frame (having density not less than 600 kg/cum) of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube, complete all as specified in MES Schedule Part-I (2009),including making good jambs in CM(1:4) with finishes to match with existing, complete all as per specification & shown in drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (having density not less than 600 kg/cum) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site, complete all as per specification in MES Schedule Part-I (2009) & shown in drawing.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F PTMT butt hinges,100 mm long and fixed with steel screws complete all as specified.

S&F PTMT handle, 125 mm long and fixed with steel screws complete all as specified.

M&L Preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of chalk whitening, complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls & applying three coats of white wash, complete all as specified.

M&L Preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer, complete all as specified.

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash, complete all as specified.

M&L for Washing, rubbing down and stopping of distempered and painted surfaces of existing treatment and preparation of old plastered surfaces of walls and applying one coat of cement base paint, complete all as specified.

M&L Washing, rubbing down and stopping of distempered and preparation of old plastered surfaces of walls and applying one coat of oil bound distemper, complete all as specified and as directed.

M&L Preparation of old decorated plastered or unplastered surfaces by brooming down with steel wire brush, scarping down smoke soot, mould,moss and efflorescent salts and trading oil, greasy spots and applying one coat of white wash on walls including cornices, pillasters etc, complete all as specified and as directed.

M&L Preparation of old decorated plastered or unplastered surfaces and applying one coat of exterior emulsion on walls including, complete all as specified and as directed.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

M&L Preparation of old treated steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass including roots, vegetation, complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for screed bedding 10 mm in cement mortar (1:4) concrete surfaces of roof, mixed with WPC (WPC shall be measured and paid seaparately), finished even and fair without using extra cement etc, complete all as specified.

Supply only integral water proofing compound ISI marked, complete all as specified.

M&L for Polymer modified bituminous membrane with sand witched polythene film/non woven polyster reinforcement/polymeric water proofing membrane 3Kg/sqm laid over hot blown grade 85/25@ 1.2kg/Sqm (i.e roof slab cleaned throughly to remove all loose particle dust/dirt particle) shall be laid over entire roof surface and on verticle surface up to grooves (or as per manufacturers recommendation) with over laps of 100mm. The over lap shall be sealed by flames or as per manufacturer instruction. Hot blown bitumen grade 85/25 @1.2kg/Sqm applied over the membrane should be compatible with membrane all as recommendation of manufacturers and all as specified and directed.

M&L for Preparation of roof surface and apply two coat of solar reflective bituminous aluminium primer @ 0.10 Kg/Sqm applied on treated bituminous membrane complete all as specified.

M&L Cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) minimum in 75mm thick as in roof and parapet wall junctions, roof benching, kerbs, mud stops, round or chamfered on edges etc including form work, weathering, slightly rounded or chamfered complete all as specified.

Taking down carefully existing alumimium/copper point wiring for light/fan/socket out let points complete with fitting and fixtures, battens, wire etc and making good the disturbed surfaces of walls and ceilings, complete all as specified.

M&L for Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia )duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for following :- (a) One light/fan/exhaust point/bell controlled by one single pole one way switch.

(b) One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .

(c) One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item 124 above but one switch socket outlet multi purpose, 3pin, 15 Amps, point to be controlled by one switch and wiring with 4 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 4 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified

S&F Switch, piano, flush type, single pole one way, 5 Amps, ISI marked,complete all as specified.

S&F Switch piano flush button type 15 Amps, single pole, one way,ISI marked, complete all as specified.

S&F Socket outlet, 3 pin, 5 Amp, piano flush type, ISI marked, complete all as specified.

S&F Socket outlet 2 in 1, 6 pin,5 Amp and 15 Amp, piano flush type,ISI marked, complete all as specified.

S&F Ceiling rose, surface type, backelite 65mmx50mm, 3 terminals, complete all as specified.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 230 volts, complete all as specified.

S&F Lamp holder, insulated body, threaded dome pattern, suitable for bracket/batten fittings, complete all as specified.

S&F LED bulb 10 watts suitable for fixing in lamp holder, complete all as specified.

S&F in repair of regular batten for LED tube 20W, 4 feet long indoor decorative batten with extruded aluminium housing & Opal diffuser energy efficient 230 Volts IP-20 fixed to walls/ceiling etc, complete all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified..

Supply & Fixing LED building security light 40 watts lens type, pressure die cast aluminium housing, heat resistance toughened glass with frame, IP 66 protection with bracket (for housing street light fittings) made of GI pipe 25 mm dia light grade 1.0 mtrs long duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts, nuts, and washers, complete all as specified and directed.

S&F and testing LED flood light 70 watts, pressure die cast aluminium housing, heat resistance toughened glass with frame, IP 65 protection with 5 KV surge protection, complete all as specified and directed.

S&F and testing LED high bay light 50 watts, pressure die cast aluminium housing, heat resistane toughened glass with frame, IP 65 protection with 5 KV surge protection, complete all as specified and directed.

S&F in repairs for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x4 Sqmm single core 650/1100 V, drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x4sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:- Two runs of cable, 1 run of earth wire & one run of PVC conduit shall be measured as one length.

S&F in repairs for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x6 Sqmm single core 650/1100 V, drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:-Two runs of cable,1 run of earth wire & one run of PVC conduit shall be measured as one length.

S&F in repair Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, concealed in wall, TPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof,suitable for incorporation of MCBs duly concealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, FP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified.

All as per item no 143 above, but SPN DB 4 way, complete all as specified.

S&F of MCCB Thermal based release adjustable type 4 pole 100 Amps 50 HZ 415 Volts with rupturing capacity 16 KA including testing, complete all as specified and as directed.

S&F in repairs MCB, SPN, 40 Amps, 240 volts 20 to 60 Amps10 KA 'B' series, complete all as specified.

S&F in repairs MCB, single pole, 240 Volt, 5 to 30 Amps,10 KA 'B' series, complete all as specified.

M& L Earthing as in repairs complete, all as shown on electrical plate No 3 of MES schedule part-I, and as specified including the following :- (i) Galvanised steel earth plate of size 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level.(ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer).(iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc.(iv) 15 mm bore light grade, GI pipe for protection to earth-strip.(v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces. (vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed.

S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan,for laying of cable and getting out, compete all as specified.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured.

S&F in repair Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/laid under floor/road crossing/walls complete with and including clamps socket & elbow etc complete all as specified.

M/S Yashpaul Gulati

Vee Vee Enterprises

Harmesh Kumar Sharma and Sons

M/s Manoj Construction Co.

M/s Surjit Singh and bros

M/S CHAWLA CONSTRUCTION COMPANY

shivam builders