REPAIR/REPLACEMENT OF CI/DI PIPE LINES AND CERTAINS MISC WORKS AT FATEHGARH CANTT UNDER AGE(I) FATEHGARH

Amount

Excavation in trenches n exc1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft/loose soil including forming bottom surface to require slope and gradient complete all as specified and directed

Returning, filling in, including spreading, levellling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as specified and directed

Removing excavated material soil not excluding 50 m and depositing where directed at the level not excluding 1.5m above the starting point all as specified and directed

M&L for PCC (1:3:6) type C-2, using 40mm graded stone aggregate for filling the cut road or making pillars / path etc for supporting pipes in trenches all as specified and directed

Taking out/ Dismantling of CI/GI water mains including all CI fittings of 150mm size, including cleaning of scale and all loose material from inner part of the bore and recoving of lead, complete all as specified and directed. (Note:- Excavation shall be measured and paid separtely under the respective items of this schedule

Taking out/ Dismantling of CI/GI water mains including all CI fittings of 100 mm size, including cleaning of scale and all loose material from inner part of the bore and recoving of lead, complete all as specified and directed. (Note:- Excavation shall be measured and paid separtely under the respective items of this schedule

Supply,laying,jointing and testing of 150 mm bore ductile iron (DI) , pressure pipes with spigot and socket ends, centrifugally cast class K-7 , with cement mortar lining in inner side as per IS 8329 and other relevant standards followed by a finishing layer of epoxy paint in outer side, suitable for push on joint ( rubber gasket joint ) in any length with inside cement mortar lining incl tyton rubber push on joint laid in trenches complete all as specified

Supply,laying,jointing and testing of 100 mm bore ductile iron (DI) , pressure pipes with spigot and socket ends, centrifugally cast class K-7 , with cement mortar lining in inner side as per IS 8329 and other relevant standards followed by a finishing layer of epoxy paint in outer side, suitable for push on joint ( rubber gasket joint ) in any length with inside cement mortar lining incl tyton rubber push on joint laid in trenches complete all as specified

Re-fixing of 150 mm bore CI water mains as obtained from taking down after de-scaling/ cleaning in trenches/walls/ floors complete all as specified and directed.

Re-fixing of 100 mm bore CI water mains as obtained from taking down after de-scaling/ cleaning in trenches/walls/ floors complete all as specified and directed.

M&L for cutting of CI/DI pipe of 100/150 mm bore including inserting of Tee, collars, connecting pieces etc in between and making pipe line workable after repairs complete all as specified and directed. (Note:- Excavation, returing, filling in, removal of surplus soil shall not be measured and paid separtely)

S&F in replacement cast iron sluice valve class PN 1.6 heavy duty both ends flanged, suitable for 80 mm bore conforming to IS 14846 of 2000 duly ISI markedm with wheel operated handle with high tensile stainless steel spindle, including nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

S&F in replacement cast iron sluice valve class PN 1.6 heavy duty both ends flanged, suitable for 100 mm bore conforming to IS 14846 of 2000 duly ISI markedm with wheel operated handle with high tensile stainless steel spindle, including nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

S&F in replacement cast iron sluice valve class PN 1.6 heavy duty both ends flanged, suitable for 150 mm bore conforming to IS 14846 of 2000 duly ISI markedm with wheel operated handle with high tensile stainless steel spindle, including nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

M & L in replacement of NRV cast iron both ends flanged, 150 mm bore ISI marked and incl all nuts bolts, sheet and gaskets etc including taking out old existing unservicable NRV complte all as specified and directed.

M&L for cast iron fittings of any description i.e bends (any type radius and angle), tappers any type (straight, bend increasing descreasing or dboule socket etc), tee pieces single branch Y junction, double branch cross, (all socketed or socket and spigot) , connecting pieces (one side flnaged other socketed or spigot and bell mouth pieces one end flanged other tapering as bell mouth or both flanged/both socketed end as directed) including collars, caps and plugs upto 200 mm and including nut bolts, packing materials etc and making joint lead proof complete all as specified and directed. Including Excavation and earth work and joints shall be measured and paid for separately under appropirate item of Sch 'A'

Supply, fixing, jointing and testing DI fittings as per BSEN:545 IS-9523 such as bend (of any radius and angle) Tee, reducer, collar caps, plugs, glands, tapers and junctions etc of any description with socket/spigot/flanged at ends as per site requirement suitable up to 150 mm bore complete all as specified and directed.

M&L for making run lead joints for 100 mm bore spigot and socketed CI pipe and fittings complete all as specified and directed

M&L for making run lead joints for 150 mm bore spigot and socketed CI pipe and fittings complete all as specified and directed

S & F in replacement of valve pit cover for chamber size 1200x1200x1200 mm made out of 3mm thick mild steel plain sheet and frame work of angle iron of size 40x40x6 mm thick incl providing 4 Nos mild steel butt hinges 100 mm size and MS handle of flat iron fabricated and two coat of synthetic enamel paint over a coat of red oxide primer and including preparation of steel surfaces complete all as specified and directed

S & F in replacement of valve pit cover for chamber size 900 x900x 900 mm mm made out of 3mm thick mild steel plain sheet and frame work of angle iron of size 40x40x6 mm thick incl providing 4 Nos mild steel butt hinges 100 mm size and MS handle of flat iron fabricated and two coat of synthetic enamel paint over a coat of red oxide primer and including preparation of steel surfaces complete all as specified and directed

S & F in replacement of valve pit cover for chamber size 600 x600x 600 mm made out of 3mm thick mild steel plain sheet and frame work of angle iron of size 40x40x6 mm thick incl providing 4 Nos mild steel butt hinges 100 mm size and MS handle of flat iron fabricated and two coat of synthetic enamel paint over a coat of red oxide primer and including preparation of steel surfaces complete all as specified and directed

M & L for construction of brick masonry valve pits with sub-class 'B' brick built in cement mortar (1:6) of size 1200 x 1200 x 1200 mm (internal dimension) with one brick walling and 150 cm x150 cm x 10 cm base foudation with PCC 1:3:6 rendering cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 01 mtr x 01 mtr made out from 3 mm thick MS sheet including 40 x 40 x 5 mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of the MS cover with two coat of synthetic enamel paint over a coat of red oxide primer including necessary earth work & demolitioln of the existing old valve pit all as specified and as directed.

M & L for construction of brick masonry valve pits with sub-class 'B' brick built in cement mortar (1:6) of size 900 x 900 x 900 mm (internal dimension) with one brick walling and 150 cm x150 cm x 10 cm base foudation with PCC 1:3:6 rendering cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 01 mtr x 01 mtr made out from 3 mm thick MS sheet hinges to frame by mean of 3 Nos MS Butt hingeswith suitable locking arrangment including 40 x 40 x 6 mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of the MS cover with two coat of synthetic enamel paint over a coat of red oxide primer including necessary earth work & demolitioln of the existing old valve pit all as specified and as directed.

M & L for construction of valve pits with sub-class 'B' brick built in cement mortar (1:6) of size 600 x 600 x 600 mm (internal dimension) with one brick walling and 120 cm x10 cm x 10 cm base foudation with PCC 1:3:6 rendering cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 75 x 75 cm made out from 3 mm thick MS sheeth hinges to frame by mean of 3 Nos MS Butt hingeswith suitable locking arrangment including 40 x 40 x 6 mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of the MS cover with two coat of synthetic enamel paint over a coat of red oxide primer including necessary earth work & demolitioln of the existing old valve all as specified and as directed.

M & L for construction of valve pits with sub-class 'B' brick built in cement mortar (1:6) of size 450 x 450 x 450 mm (internal dimension) with one brick walling and 120 cm x10 cm x 10 cm base foudation with PCC 1:3:6 rendering cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 75 x 75 cm made out from 3 mm thick MS sheet hinges to frame by mean of 3 Nos MS Butt hingeswith suitable locking arrangment including 40 x 40 x 6 mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of the MS cover with two coat of synthetic enamel paint over a coat of red oxide primer including necessary earth work & demolitioln of the existing old valve all as specified and as directed.

M&L in replacement of LED aviation light on OH tank 18/21 mtrs staging (on top of OH tank ) with all fittings, fixtures and accessories including 6 Sqmm 2 core XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade,passing through 25 mm PVC Conduit medium grade and fix on RCC OHT Staging(18/21 Mtrs) by means of MS clamp and screws complete all as specified and as directed from light to connection points, including 2- way MCB DB with isolator ( 10 Amp) capacity complete all as specified and directed.

S&F in replacement of water level indicator having indication of very low , middle, high and full with magnetic float switch sensor suitable for 50000 to 100000 Gln capacity of OHT complete all as specified and directed.

M&L in replacement laying in ground wire from probe unit to controller of 10 pair PVC copper conductor (0.5 sqmm ) complete all as specified and directed

M & L in replacement of GI pipe light grade 20 mm dia fixed to wall of OH tank with saddles at 1.0 mtr interval for protection of copper conductors 10 pairs all as directed by Engr-in-Charge

…ditto as above but laid in trenches/across the road along the wall…ditto….

M&L for Leakage detection in CI/DI water mains 150 mm bore and carrying out necessary repairs including cutting, reducing for insertion of CI/DI fittings such as short pieces, Tee, Bends, reducer, collar, joints all as required at site including Excavation, returning, filling in and removal of excess spoil complete. Note :- 1. Necessary CI/DI fittings will be measured and paid under relevant items of this schedule

M& for Leakage detection in CI/DI water mains 100 mm bore and carrying out necessary repairs including cutting, reducing for insertion of CI/DI fittings such as short pieces, Tee, Bends, reducer, collar, joints all as required at site including Excavation, returning, filling in and removal of excess spoil complete. Note :- 1. Necessary CI/DI fittings will be measured and paid under relevant items of this schedule

M/S S P CONSTRUCTION