Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80.7 LAccepted-AOC SUBHAM HEIGHT VAYA 401 P O KAHILIPARA GUWAHATI KAMRUP M ASSAM | GUWAHATI | KAMRUP M | ASSAM | L1 | Accepted-AOC PROPER |
Tender Value
₹89.6 L
EMD Value
₹1.8 L
Closing Date
13 Apr 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer Water Resources Department
O/O Chief Engineer Water Resources Department, Basistha, Guwahati 29
Construction of single shutter sluice gate at Keotpara to prevent back flow of river Brahmaputra.
2023_DoWR_30124_1
GHY EAST/2022-23/SOPDG-II/III
Open Tender
Civil Works
Works
90 days
GUWAHATI EAST
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
₹1.8 L
Yes
16 May 2024
24 Mar 2023
13 Apr 2023
24 Mar 2023
13 Apr 2023
1 Apr 2023
Amount
Earthwork in excavation for structures as per drawing and technical specificationsClause 305.1 including setting out, construction of shoring and bracing, removalof stumps and other deleterious material and disposal upto a lead of 50 m,dressing of sides and bottom and backfilling in trenches with excavated suitable material. V. Marshy soil
Fillling in foundation trenches as per drawing and technical specification Clause305.3.9 I Sand filling
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 A With crushed Stone II P.C.C grade M 15 , Nominal mix 1:2.5:5 ( Hand mix)
Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 (A) With crushed stone (I) R.C.C grade M 20 (i) For nominal mix 1:2:4(a) Height upto 5 M
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns
Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
Supplying, fitting and placing TMT IS:1786 (Fe 500) bar reinforcement in sub-structure complete as per drawing and technical specifications(a) TMT-IS 1786 ( Fe-500 D) Primary Producer (TATA/ SAIL/ Esser Steel/Jindal panther steel/ Shyam steel or equivalent)
Reinforcement in Super Structure: Supplying, fitting and placing TMTconforming to IS:1786 Fe 500 D reinforcement in super-structure including splicing complete as per drawing and technical specifications TMT-IS 1786 ( Fe-500 D) Primary Producer (TATA/ SAIL/ Esser Steel/ Jindal panther steel/ Shyam steel or equivalent)
Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap) : 20.1.1 400 mm dia piles
12 mm cement plaster of mix : 13.4.1 1:4 (1 cement: 4 coarse sand)
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8. Granular material
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
M.S. plate 6 mm for shutter and overtop
M.S. channel (100 x 50 ) mm for stiffeners.
'J' type rubber seal 125 mm
'J' type rubber seal corner 75 mm
M.S. Flat (50x6) mm for fixing rubber seal
Nuts & bolts ( assorted size )
M.S. washer ( assorted size )
M.S. Electrode 8.S WG
Red Oxide Primer
Antisol Red Oxide paint
Turpentine Oil
Steel wire brush
Painting brush 3"
Refilled Oxygen Gas
Refilled DA Gas
J' type Rubber seal corner 125 mm
H.S. Diesel for Generator
M.S. Channel (100 x50) mm for fabrication of Guide, Top & Bottom Channel
M.S Angle (75x75x 8) mm for Base support and railing post
M.S Angle (75x75x 6 )mm for Tool Post ,Base support etc.
Separator stud with nut on both end with tube of length 250 mm to 460 mm
M.S. Shaft 50 mm dia
Thread cutting 2 TPI including fine finishing and making hole in one end as per direction,
C.I Boss with internal thread cutting 2TPI making groove for bearing slot for lock plate &1.5’’drill for providing handle as per direction for size:125mmX 150 mm
M.S Base Plate 300X300x10 mm
M.S Lock Plate 300X300x8 mm
M.S Angle (75x75x 8) mm for Tool post
Clamp for lock plate
Shaft pin 16mm
H.D Thrust Ball Bearing (best quality) ISI specified 50 mm dia
W B Grease
Matured full length bamboo (a) Jati
Nylon rope
Coir rope
I. Ordinary labour for clearing of barrel garbage at Sluice Gate channel, loading carrying & unloading of iron materials watch keeping duty & other allied works during fabricxation etc.
II. Skilled labour (other than ITI certificate holder)
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Supply of Geo Bags Type-B (Size 2.00 m × 1.50 m inner to inner) (Pillow Type) made of composite layers of Polypropylene (PP) fibre as per IS 6653:2017 for Nonwoven and IS 16654:2017 for Woven: Woven Geo-textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra violet stabilized polypropylene. Geo-textile used to manufacture geo textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Properties i. Tensile strength (MD) ≥ 80 KN/m & Tensile strength (CD) ≥ 70 KN/m ii. Elongation (MD) ≤ 25% & Elongation (CD) ≤ 25% iii. Abrasion ≥ 75% iv. Trapezoidal Tear Strength (MD) ≥ 1500N & Trapezoidal Tear Strength (CD) ≥ 1300N v. CBR Puncture strength ≥ 900N vi. Permeability ≥ 18 l/m2/sec vii. AOS ≤ 250 micron viii. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% ix. Mass ≥ 300 gm/m² x. Seam strength ≥ 50 % of actual fabric strength. Non-Woven Geo-textile for the inner layer (300gsm): It is needle punched non-woven geo-textile made of 100% polypropylene staple fibres which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Properties i. Wide Tensile strength (MD) ≥ 15 KN/m & Wide Tensile strength (CD) ≥ 15 KN/m ii. Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N v. CBR Puncture strength ≥ 3000 N vi. Permittivity ≥ 1.25 s-1vii. Permeability ≥ 60 l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 300 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge. (Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material)
Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon).
Collection and supply of River silt by truck carriage free from debries and other foreign material, etc. complete as directed. By mechanical Means For initial up to 1.00 Km & for all lifts.
Filling and laying of nonwoven Geo - textile bag of dimension 2.00 m × 1.50 m excluding excavation of specified sand/silt from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand having minimum volume 0.612 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100 m complete as directed. (Sand/silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost) With Mar Boat.
stage.html
html • 0.04 MB
techsummary_48418.pdf
PDF • 0.30 MB
BOQ Comparative Chart
xlsx • 0.01 MB
finsummary_48418.pdf
PDF • 0.27 MB
ghyeast_keotpara.pdf
PDF • 3.35 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .