Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹38.9 L+₹2,470 (0.06%)Rejected-Finance 503 LAJPAT NAGAR ALWAR RAJ 301001 | ALWAR | RAJASTHAN | 301001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹40.9 L+₹2.1 L (5.34%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹41.3 L+₹2.4 L (6.27%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹41.3 L+₹2.5 L (6.32%)Rejected-Finance PLOT NO 261 SHANTI KUNJ ALWAR 301415 RAJ | ALWAR | RAJASTHAN | 301415 | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | Radha Enterprises L5 | shiva construction L7 | M/s Laxmi Enterprises L3 | ALAKNANDA ENTERPRISES L2 | VASUNDHARA AND COMPANY L1 | M/s R P Enterprises L6 | RAJEEV CONSTRUCTION L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of Asbestos cement corrugated semi-corrugated sheets in roof covering complete all as specified & directed. | 2,730 | Sqm | 7 ₹19,110 | 25 ₹68,250 | 5 ₹13,650 Lowest | 5 ₹13,650 Lowest | 10 ₹27,300 | 10 ₹27,300 | 30 ₹81,900 |
| 2.00 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. | 11.5 | Per Quintal | 500 ₹5,750 | 400 ₹4,600 | 249 ₹2,863.5 | 500 ₹5,750 | 100 ₹1,150 Lowest | 500 ₹5,750 | 500 ₹5,750 |
| 3.00 | Dismantling posts/struts (Steel/RCC/wooden posts) rafter/purline in any description including making good to disturbed portion complete all as specified and directed. | 2,000 | RM | 9 ₹18,000 | 10 ₹20,000 | 15 ₹30,000 | 4 ₹8,000 Lowest | 5 ₹10,000 | 5 ₹10,000 | 10 ₹20,000 |
| 4.00 | Dismantling wall and celling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified & directed. | 1,300 | Sqm | 7 ₹9,100 | 10 ₹13,000 | 5 ₹6,500 | 10 ₹13,000 | 2 ₹2,600 Lowest | 15 ₹19,500 | 25 ₹32,500 |
| 5.00 | M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with and including galvanized iron powder coated inverted 'Tee' or 'L' section (concealed GI frame work) suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete, all as directed and specified.
(a) Size of grid - 610 x 610 mm.
(b) Size of main Tee – 39 x 24.70 x 0.80 mm.
(c) Size of cross Tee – 39 x 24.70 x 0.80 mm.
(d) Size of wall angle – 22.20 x 22.20 x 0.65 mm. | 1,300 | Sqm | 780 ₹10,14,000 | 700 ₹9,10,000 | 800 ₹10,40,000 | 720 ₹9,36,000 | 660 ₹8,58,000 | 850 ₹11,05,000 | 625 ₹8,12,500 Lowest |
| 6.00 | S& F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. | 2,530 | Sqm | 620 ₹15,68,600 | 700 ₹17,71,000 | 620 ₹15,68,600 | 600 ₹15,18,000 | 650 ₹16,44,500 | 650 ₹16,44,500 | 575 ₹14,54,750 Lowest |
| 7.00 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as specified | 200 | Sqm | 635 ₹1,27,000 | 700 ₹1,40,000 | 650 ₹1,30,000 | 610 ₹1,22,000 | 650 ₹1,30,000 | 600 ₹1,20,000 | 575 ₹1,15,000 Lowest |
| 8.00 | M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Wind ties etc grade Fe-410-W Quality A complete all as specified and directed. | 7,850 | kg | 80 ₹6,28,000 | 75 ₹5,88,750 | 70 ₹5,49,500 Lowest | 72 ₹5,65,200 | 70 ₹5,49,500 Lowest | 90 ₹7,06,500 | 88 ₹6,90,800 |
| 9.00 | S&F for rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250 ) quality-A complete all as specified and directed. | 210 | Kg | 84 ₹17,640 | 75 ₹15,750 | 70 ₹14,700 Lowest | 80 ₹16,800 | 88 ₹18,480 | 95 ₹19,950 | 88 ₹18,480 |
| 10.00 | M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement complete including taking down old plaster complete all as specified and directed | 500 | Sqm | 165 ₹82,500 | 170 ₹85,000 | 155 ₹77,500 | 160 ₹80,000 | 150 ₹75,000 Lowest | 170 ₹85,000 | 170 ₹85,000 |
Tender Value
₹45.1 L
EMD Value
₹91,000
Closing Date
18 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
Alwar
SPL REPAIR/REPLACEMENT OF CGI SHEET IN LIEU OF AC SHEET AT BLDG NO T-01, T-02, T-06, T-08/D AT ARTY DIV CAMP AND OTHER MISC SANCTIONED WORKS AT ITARANA MIL STN, ALWAR
2025_MES_731629_1
8457/E8
Open Tender
Civil Works
Item Rate
180 days
Alwar
As per NIT
6 documents required · 6 mandatory
₹500
GE Alwar
₹91,000
Yes
26 Dec 2025
18 Sept 2025
20 Oct 2025
18 Sept 2025
18 Oct 2025
4 Oct 2025
18 Sept 2025 - 3 Oct 2025
Amount
Dismantling of Asbestos cement corrugated semi-corrugated sheets in roof covering complete all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling posts/struts (Steel/RCC/wooden posts) rafter/purline in any description including making good to disturbed portion complete all as specified and directed.
Dismantling wall and celling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified & directed.
M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with and including galvanized iron powder coated inverted 'Tee' or 'L' section (concealed GI frame work) suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete, all as directed and specified. (a) Size of grid - 610 x 610 mm. (b) Size of main Tee – 39 x 24.70 x 0.80 mm. (c) Size of cross Tee – 39 x 24.70 x 0.80 mm. (d) Size of wall angle – 22.20 x 22.20 x 0.65 mm.
S& F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as specified
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Wind ties etc grade Fe-410-W Quality A complete all as specified and directed.
S&F for rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250 ) quality-A complete all as specified and directed.
M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement complete including taking down old plaster complete all as specified and directed
M&L rendering 15mm thick in cement mortar 1:6 including WPC @ 3% by weight of cement on stone/brick masonry finished even and smooth complete all as specified and directed by Engineer-in-Charge. Note : quoted rate is deemed to be inclusive for work at any height and location including cost of scaffolding and all other equipments reqd to execute the work including Taking down old plaster.
M&L for preparation newly plastered surfase of wall and applying two coats of OBD including 1mm thick wall care putty complete all as specified and directed.
Material and labour for preparation of newly plaster surface of wall & applying two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding.
M&L for preparation of old painted surfaces of steel/iron surfaces by cleaning down surfaces exc 10 cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed.
Demolition of brick or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facing dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed.
Demolition cement concrete (unreinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating complete all as specified and directed.
Taking down Rolling shutter area exc 1.5 Sqm and n,exc 25 Sqm complete all as specified and directed.
Taking down chowkhat with shutter without taking off shutter from the frame exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.
S&F Steel rolling shutters made of sheet 1.25mm thick laths, with gear operated type , as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer complete. The side guide rail will be made of MS sheet 3 mm thick erected in position with help of anchor fastner complete all as specified and directed.
S&F frame work such as grills,gratring etc,with ends of bars shouldered &/or riveted or forged into spikes,framed guard bars, barred iron door ladder,frame balusters,walk ways, railing,frame work or water tanks & SImilar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F mild steel sheet 1.25mm thick fixed with mild steel frame work for door/gates etc and necessary fix in with screws/rivets/welding complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces finished even and fair without using extra cement using WPC @ 3% bt wt of cement complete all as specified and as directed. WPC shall be measured and paid separately complete all as specified and directed.
Supply only integral water proffing compound in plaster complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed.
M&L preparation of newly plasterd surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation of newly plasterd surfaces of wall & applying three coats of white wash complete all as specified and directed.
ALAKNANDA ENTERPRISES (BID ID -3448241)
M/s Laxmi Enterprises (BID ID -3454678)
RAJEEV CONSTRUCTION (BID ID -3454269)
Radha Enterprises (BID ID -3446726)
M/s R P Enterprises (BID ID -3454365)
shiva construction (BID ID -3454435)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
Tender8457.pdf
Tender Documents • 0.96 MB
BOQ_819126.xls
BOQ • 1.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .