Development of various Sports Infrastructure like ISP Cricket coaching center, Chess Center, Boxing Ring complex, Burnpur Stadium, Cricket Ground, Spo

Bill of Quantity

Name of Work: Development of various Sports Infrastructure like ISP Cricket coaching center,

Chess Center, Boxing Ring complex, Burnpur Stadium, Cricket Ground, Sports House Complex,

Nehru Park etc. at IISCO.

S.No. Brief description of Work Amount (In Rs.)

1 Bowling practice pitch repair works 199,907.20

2 Construction of Store room and wash room 1,983,444.44

3 Repair and renovation works at Chess centre 836,877.60

4 Repair and renovation works of Boxing ring complex 530,002.33

5 Illumination and allied Electrification works at Burnpur Stadium 574,939.25

6 Construction of MS shade at cricket ground 5,080,956.64

Repair and renovation works of Sports house complex along with

external street light works & waterproofing of gym terrace

8 Miscellaneous works at Nehru park 2,900,237.06

(Rupees One Crore Forty Six Lakhs Fourteen Thousand Four Hundred Fifty Only)

Digitally signed by SILKI

Bill of Quantity

Name of Work: Repair, renovation and alterations works of Sports Infrastructure at SAIL ISP Burnpur,

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

A. Bowling practice pitch repair works

Demolishing cement concrete manually/ by

mechanical means including disposal of material

1 15.2 within 50 metres lead as per direction of Engineer - in -

Nominal concrete 1:3:6 or richer mix (i/c equivalent

Disposal of building rubbish / malba / similar

unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting,

2 15.60 unloading to approved municipal dumping ground or Cum 2 263.95 527.90

as approved by Engineer-in-charge, beyond 50 m

initial lead, for all leads including all lifts involved.

Centering and shuttering including strutting, propping

etc. and removal of form for

5.9.16 Edges of slabs and breaks in floors and walls

Providing and laying in position cement concrete of

4 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived

4.1.2 from natural sources : 3 graded stone aggregate 20 mm Cum 15 8,340.85 125,112.75

nominal size derived from natural sources)

Earth work in surface excavation not exceeding 30 cm

in depth but exceeding 1.5 m in width as well as 10

5 2.1 sqm on plan including getting out and disposal of

excavated earth upto 50 m and lift upto 1.5 m, as

directed by Engineer-in- Charge:

2.1.1 All kinds of soil Sqm 290 129.85 37,656.50

6 13.16 6 mm cement plaster of mix

7 13.18 Neat cement punning Sqm 50 79.95 3,997.50

Sub Total for cricket pitch repair 199,907.20

B. Construction of Store room and wash room

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.

2.6.1 All kinds of soil Cum 60 177.50 10,650.00

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

2 2.25 exceeding 20cm in depth, consolidating each deposited Cum 42 196.00 8,232.00

layer by ramming and watering, lead up to 50 m and

lift upto 1.5 m.

Providing and laying in position cement concrete of

3 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

4.1.5 natural sources : 6 graded stone aggregate 20 mm Cum 8 7,294.70 58,357.60

nominal size derived from natural sources)

Supplying and filling in plinth with sand under floors,

4 2.27 including watering, ramming, consolidating and Cum 9 2,123.75 19,113.75

dressing complete

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing and laying in position cement concrete of

5 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived

4.1.2 from natural sources : 3 graded stone aggregate 20 mm Cum 13 8,340.85 108,431.05

nominal size derived from natural sources)

Providing and laying cement concrete in retaining

walls, return walls, walls (any thickness) including

attached pilasters, columns, piers, abutments, pillars,

posts, struts, buttresses, string or lacing courses,

parapets, coping, bed blocks, anchor blocks, plain

window sills, fillets, sunken floor etc., up to floor five

level, excluding the cost of centering, shuttering and

1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived

4.2.2 from natural sources : 3 graded stone aggregate 20 mm Cum 17 10,357.55 176,078.35

nominal size derived from natural sources).

Centering and shuttering including strutting, propping

etc. and removal of form for

Suspended floors, roofs, landings, balconies and access

Lintels, beams, plinth beams, girders, bressumers and

5.9.7 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 70 764.95 53,546.50

5.9.19 Weather shade, Chajjas, corbels etc., including edges Sqm 10 951.10 9,511.00

Steel reinforcement for R.C.C. work including

8 5.22 straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D

Steel reinforcement for R.C.C. work including

9 5.22A straightening, cutting, bending, placing in position and

binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D

Brick work with common burnt clay F.P.S. (non

10 6.1 modular) bricks of class designation 7.5 in foundation

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7 7,132.25 49,925.75

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in

all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 30 9,105.95 273,178.50

Cement Plaster (In Coarse Sand)

12 13.6 20 mm cement plaster of mix :

13 13.4 12 mm cement plaster of mix :

Extra for providing and mixing water proofing material

14 13.21 in cement plaster work in proportion recommended by 50 22.10 1,105.00

the manufacturers.

Distempering with 1st quality acrylic distemper (ready

mixed) having VOC content less than 50 gms/litre, of

approved manufacturer and of required shade and

colour all complete to achieve even shade and colour :

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

New work (two or more coats) over and including

13.41.1 water thinnable priming coat with cement primer Sqm 165 185.65 30,632.25

having VOC content less than 50 gms/litre

Finishing walls with Acrylic Smooth exterior paint of

required shade :

New work (Two or more coat applied @ 1.67 ltr/10

13.46.1 sqm over and including priming coat of exterior primer Sqm 145 160.60 23,287.00

applied @ 0.90litre /10 sqm)

17 13.5 Applying priming coat :

With ready mixed red oxide zinc chromate primer of

13.50.3 approved brand and manufacture on steel galvanised Sqm 10 67.40 674.00

iron/ steel works

Painting with synthetic enamel paint of approved

18 13.62 brand and manufacture of required colour to give an

Two or more coats on new work over an under coat of

13.62.1 suitable shade with ordinary paint of approved brand Sqm 10 226.25 2,262.50

and manufacture

Providing and laying rectified Glazed Ceramic floor

tiles of size 300x300 mm or more (thickness to be

specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in colours

19 11.39 White, Ivory, Grey, Fume Red Brown, laid on 20 mm Sqm 10.5 1,330.00 13,965.00

thick cement mortar 1:4 (1 Cement: 4 Coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and

matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall

tiles conforming to IS: 15622 (thickness to be specified

by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size

as approved by Engineer in-Charge, in skirting, risers

of steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including

pointing in white cement mixed with pigment of

matching shade complete.

Providing and laying Vitrified tiles in floor in different

sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming

to IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey

21 11.41A cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc.

The tiles must be cut with the zero chipping diamond

cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness,

leveling system and rubber mallet for placing the tiles

gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer), with

water absorption less than 0.08 % and conforming to

I.S. 15622, of approved make, in all colours & shade, in

22 11.46 skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1 cement: 3 coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sqm including grouting

the joint with white cement & matching pigments etc.

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing and fixing factory made uPVC door frame

made of uPVC extruded sections having an overall

dimension as below (tolerance ±1mm), with wall

thickness 2.0 mm (± 0.2 mm), corners of the door

frame to be Jointed with galvanized brackets and

stainless steel screws, joints mitred and Plastic

welded. The hinge side vertical of the frames

reinforced by galvanized M.S. tube of size 19 X 19 mm

and 1mm (± 0.1 mm) wall thickness and 3 nos.

stainless steel hinges fixed to the frame complete as

per manufacturer’s specification and direction of

Engineer- in-charge

9.117.1 Extruded section profile size 48x40 mm Metre 35 270.20 9,457.00

24 9.118 Providing and fixing to existing door frames.

30 mm thick factory made Polyvinyl Chloride (PVC)

door shutter made of styles and rails of a PVC hollow

section of size 60x30 mm and wall thickness 2 mm

(± 0.2 mm), with inbuilt decorative moulding edging on

one side. The styles and rails mitred and joint at the

corners by means of M.S. galvanised/ plastic

brackets of size 75x220 mm having wall thickness 1.0

mm and stainless steel screws. The styles of the

shutter reinforced by inserting galvanised M.S. tube of

size 25x20 mm and 1 mm (± 0.1 mm) wall thickness.

9.118.2 The lock rail made up of 'H' section, a PVC hollow Sqm 10 3,253.80 32,538.00

section of size 100x30 mm and 2 mm (± 0.2 mm) wall

thickness fixed to the shutter styles by means of

plastic/ galvanised M.S. 'U' cleats. The shutter frame

filled with a PVC multi-chambered single panel of size

not less than 620 mm, having over all thickness of 20

mm and 1 mm (± 0.1 mm) wall thickness . The panels

filled vertically and tie bar at two places by inserting

horizontally 6 mm galvanised M.S. rod and fastened

with nuts and washers, complete as per manufacturer's

specification and direction of Engineer-in-charge.

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z

sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary

filling up the gaps at junctions, i.e. at top, bottom and

sides with required EPDM rubber/ neoprene gasket

etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever

required including cleat angle, Aluminium snap

beading for glazing / paneling, C.P. brass / stainless

steel screws, all complete as per architectural drawings

and the directions of Engineer-in-charge. (Glazing,

paneling and dash fasteners to be paid for

21.1.1 For fixed portion

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making

26 21.1.2 provision for fixing of fittings wherever required

including the cost of EPDM rubber / neoprene gasket

required (Fittings shall be paid for separately)

Powder coated aluminium (minimum

thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as per

the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading

shall be paid in basic item):

With float glass panes of 4.0 mm thickness (weight not

less than 10kg/sqm)

Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or round

bars etc. including priming coat with approved

steel primer all complete.

Fixed to openings /wooden frames with rawl plugs

Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed

29 9.1 and fixed in position with hold fast lugs or with dash

fasteners of required dia & length (hold fast lugs or

dash fastener shall be paid for separately).

9.1.3 Kiln seasoned and chemically treated hollock wood Cum 0.8 83,378.05 66,702.44

Providing and fixing panelled or panelled and glazed

shutters for doors, windows and clerestory windows,

fixing with butt hinges of required size with necessary

30 9.5 screws, excluding panelling which will be paid for

separately, all complete as per direction of Engineer-in-

charge. (Note:- Butt hinges and necessary screws shall

be paid separately)

9.5.2 Kiln seasoned and chemically treated hollock wood

9.5.2.2 30 mm thick shutters Sqm 8 2,676.85 21,414.80

Providing and fixing aluminium sliding door bolts, ISI

marked anodised anodic coating not less than grade AC

10 as per IS : 1868), transparent or dyed to required

colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked

anodised ( anodic coating not less than grade AC 10 as

per IS: 1868) transparent or dyed to required colour or

shade with nuts and screws etc. complete-

Providing and fixing aluminium handles ISI marked

anodised ( anodic coating not less than grade AC 10 as

per IS: 1868) transparent or dyed to required colour or

shade with nuts and screws etc. complete-

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing and fixing aluminium hanging floor door

stopper, l5l marked, anodised (anodic coatinS not less

34 9.101.2 than grade AC 10 as per 15 : 1868) transparent or dyed Each 2 72.35 144.70

to required colour and shade, with necessary screws

etc. complete. Twin rubber stopper

Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6

graded stone aggregate 20 mm nominal size) over

35 4.17 75mm thick bed of dry brick ballast 40 mm nominal Sqm 15 749.30 11,239.50

size, well rammed and consolidated and grouted with

fine sand, including necessary excavation, levelling &

dressing & finishing the top smooth.

Providing and fixing white vitreous china pedestal type

water closet (European type W.C. pan) with seat and

lid, 10 litre low level white P.V.C. flushing cistern,

36 17.2 including flush pipe, with manually controlled device

(handle lever), conforming to IS : 7231, with all fittings

and fixtures complete, including cutting and making

good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and

Providing and fixing 8mm dia C.P./S.S. Jet with flexible

tube upto 1 meter long with S.S. Triangular plate to

european type W.C. Of approved quality and make as

approved by engineer in charge.

Providing and fixing PTMT soap Dish Holder having

length of 138mm, breadth 102mm, height of 75mm

with concealed fitting arrangements, weighing not less

Providing and fixing wash basin with C.I. brackets, 15

mm C.P. brass pillar taps, 32 mm C.P. brass waste of

39 17.7 standard pattern, including painting of fittings and

brackets, cutting and making good the walls wherever

White Vitreous China Flat back wash basin size

550x400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china flat back or

wall corner type lipped front urinal basin of

430x260x350 mm or 340x410x265 mm sizes

Providing and fixing PTMT 15 mm Urinal spreader size

41 17.75 95x69x100 mm with 1/2" BSP thread and shapes, Each 2 107.20 214.40

weighing not less than 60 gms.

Providing and fixing PTMT urinal cock of approved

quality and colour.

15 mm nominal bore, 80 mm long, 42 mm high and

17.76.1 30mm wide with BSP female threads weighing not less Each 2 175.40 350.80

Providing and fixing P.V.C. waste pipe for urinal

including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

Providing and fixing stone slab with table rubbed,

edges rounded and polished, of size 75x50 cm deep

and 1.8 cm thick, fixed in urinal partitions by cutting a

chase of appropriate width with chase cutter and

embedding the stone in the chase with epoxy grout or

with cement concrete 1:2:4 (1 cement : 2 coarse sand :

4 graded stone aggregate 6 mm nominal size) as per

direction of Engineer-in-charge and finished smooth.

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

8.10.2 Granite Stone of approved shade Sqm 2 4,051.85 8,103.70

Providing and fixing uplasticised PVC connection pipe

with brass unions :

18.21.2 45 cm length

18.21.2.1 15 mm nominal bore Each 10 97.75 977.50

Providing and fixing mirror of superior glass (of

approved quality) and of required shape and size with

plastic moulded frame of approved make and shade

with 6 mm thick hard board backing :

17.32.4 Rectangular shape 1500x450 mm Each 2 2,093.00 4,186.00

47 17.34 Providing and fixing toilet paper holder

Providing and fixing P.V.C. waste pipe for sink or wash

basin including P.V.C. waste fittings complete.

17.28.1 Flexible pipe

Providing and fixing PTMT towel rail complete with

brackets fixed to wooden cleats with CP brass screws

with concealed fittings arrangement of approved

quality and colour

600 mm long towel rail with total length of 645 mm,

17.73.2 width 78 mm and effective height of 88 mm, weighing Each 6 708.95 4,253.70

not less than 190 gms.

Providing and fixing C.P. brass shower rose with 15 or

Providing and fixing brass stop cock of approved

18.16.1 15 mm nominal bore Each 4 353.25 1,413.00

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, ISI : 12701 marked,

with cover and suitable locking arrangement and

52 18.48 making necessary holes for inlet, outlet and overflow Ltr. 1500 11.00 16,500.00

pipes but without fittings and the base support for

tank. Circular tank

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00

53 18.8 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and the cost of

cutting chases and making good the same including

testing of joints complete as per direction of Engineer

Concealed work, including cutting chases and making

good the walls etc.

18.8.1 15mm nominal bore Metre 18 497.80 8,960.40

18.8.2 20mm nominal bore Metre 15 537.60 8,064.00

18.8.3 25mm nominal bore Metre 14 627.25 8,781.50

18.8.4 32 mm nominal bore Metre 10 739.30 7,393.00

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass

threaded fittings, including fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and testing

of joints complete as per direction of Engineer in

Internal work - Exposed on wall

18.7.4 32 mm nominal bore Mtr. 5 518.75 2,593.75

18.7.6 50mm nominal bore Mtr. 5 934.15 4,670.75

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing and fixing PTMT Ball cock of approved

55 18.62 quality, colour and make complete with Epoxy coated

aluminium rod with L.P./ H.P.H.D. plastic ball.

25 mm nominal bore, 152mm long, weighing not less

Providing and fixing ball valve (brass) of approved

56 18.18 quality, High or low pressure, with plastic floats

Making soak pit 2.5 m diameter 3.0 metre deep with 45

x 45 cm dry brick honey comb shaft with bricks and

S.W. drain pipe 100 mm diameter, 1.8 m long complete

as per standard design.

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

Rainwater pipes

Providing and fixing on wall face unplasticised Rigid

PVC rain water pipes conforming to IS : 13592 Type A,

58 12.41 including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC

moulded fittings/ accessories for unplasticised Rigid

59 12.42 PVC rain water pipes conforming to IS : 13592 Type A

including jointing with seal ring conforming to IS :

5382 leaving 10 mm gap for thermal expansion.

12.42.2 Single Push fit coupler

60 12.42.3 Single Tee with door

62 12.42.6 Shoe (Plain)

Providing and fixing to the inlet mouth of rain water

63 12.44 pipe cast iron grating 15 cm diameter and weighing not Each 2 54.70 109.40

less than 440 grams.

Providing and fixing unplasticised -PVC pipe clips of

approved design to unplasticised - PVC rain water

pipes by means of 50x50x50 mm hard wood plugs,

64 12.43 screwed with M.S. screws of required length, including

cutting brick work and fixing in cement mortar 1:4 (1

cement : 4 coarse sand) and making good the wall etc.

Making khurras 45x45 cm with average minimum

thickness of 5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm

65 12.22 nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, Each 2 298.25 596.50

finished with 12 mm cement plaster 1:3 (1 cement : 3

coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

66 17.35 Providing and fixing soil, waste and vent pipes

Hubless centrifugally cast (spun) iron pipes epoxy

coated inside & outside IS:15905

Providing and filling the joints with spun yarn cement

67 17.36 slurry and cement mortar 1:2 (1 cement: 2 fine sand)

in S.C. I/C. I pipes

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing and fixing bend of required degree with

68 17.38 access door, insertion rubber washer 3 mm thick, bolts

Hubless centrifugally cast (spun) iron pipes epoxy

coated inside & outside IS:15905

Providing and fixing trap of self cleansing design with

screwed down or hinged grating with or without vent

arm complete, including cost of cutting and making

good the walls and floors :

100 mm inlet and 100 mm outlet Hubless centrifugally

17.60.1.3 cast (spun) iron epoxy coated inside & outside as per Each 2 854.55 1,709.10

All charges for the preparation of architectural and

structural drawings of the building. The contractor

shall be able to start the work after the obtaining of the

vetted drawings and submission of the same to NBCC.

Electrical works in wash room and store room

A. SCHEDULE ITEMS (DSR-2022) (PART-A)

Point Wiring in Medium Class PVC Conduit, with

Modular type Switch: Wiring for light point/ fan

point/ exhaust fan point/ call bell point with 1.5 sq.mm

FR PVC insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit, with

modular type switch, modular plate, suitable size of GI

box and earthing the point with 1.5 sq.mm. FR PVC

insulated copper conductor single core cable etc as

required. Make FRLS PVC CU Wire::- Havells, Polycab,

Rajnigandha, RR Cable. (Make of Modular switch

Sockets:- Havells (ATHENA), L&T ENGLAZE), Legrand

(LYNCUS) , Anchor(WOODS), Schneider-(OPEL)

Wiring for light/power plug with 2x4 Sq.mm FR PVC

insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit along

with 1 No. 4 Sq.mm FR PVC insulated copper conductor

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FR PVC insulated

3 D.S.R 1.14 copper condcutor, single core cable in surface/

recessed Medium Class PVC conduit as required.

Make:- Havells, Polycab, Rajnigandha, RR Cable.

Supplying and fixing of following switch/ socket on

4 the existing modular plate & switch box including

connections but excluding modular plate etc. as reqd.

1.24.4 3 pin 5/6A socket outlet Each 6 122.00 732.00

Supplying and fixing Stepped type electronic fan

D.S.R. regulator on the existing modular plate & switch box

1.25 including connections but excluding modular plate etc.

Supplying and fixing modular blanking plate on the

6 existing modular plate & switch box excluding modular Each 6 40.00 240.00

plate as required.

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

D.S.R. including providing and fixing 3 pin 5/6 Amp modular

1.31 socket outlet and 5/6 A modular type switch,

connections painting etc. as reqd. (for Light plug

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

8 including providing and fixing 6 pin 5/6 & 15/16 Amp Each 3 586.00 1,758.00

modular socket outlet and 15/16 A modular type

switch, connections painting etc. as reqd.

Supplying & fixing of 3 pin, 5 amp Ceiling rose on the

9 existing junction box/ wooden block including Each 6 87.00 522.00

connection as required.

D.S.R. Supplying and fixing brass batten/angle holder

1.34 including connection etc. as required.

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

D.S.R. types, complete with all accessories and tube/lamp etc.

1.41 directly on ceiling /wall including connections with 1,5

Sq mm FRLS PVC insulated copper conductor, single

core cable and earthing etc. as required

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

types, complete with all accessories and tube/lamp etc.

including supplying and fixing ball and socket

12 arrangement , 2 nos. down rodsof 20mm diax 1.6 mm Each 10 471.00 4,710.00

thick steel conduitup to 30 CM length, paniting and

wiring the down rod and connections with 1.5 Sq MM

FRLS PVC insulated copper conductor, single core cable

and earthing etc. as required.

Installation, testing and commissioning of Ceiling Fans,

including wiring the down rods of standard length (up

13 to 30cm) with 1.5 Sq mm FRLS PVC insulated copper Each 6 213.00 1,278.00

conductor, single core cable and earthing etc. as

Supplying and fixing following way, horizontal type

thee pole & neutral, sheet steel, MCCB distribution

board, 415V, on surface/ recces , complete with tinned

copper bus bar, neutral bar, earth bar, din bar

interconnections, powder painted including earthing

etc. as required (But without MCCB/RCCB/Isolator)

Make:-SIEMENS-Bitaguard, LEGRAND-Ekinox³-,

SCHNEIDER-ACTI-9, L&T-AU

Supplying & fixing 5 amps to 32 amps rating 240/415

volts 10 kA, C curve Miniature Circuit Breaker suitable

for inductive loads of following poles in the existing

MCB DB complete with connections, testing and

2.10.1 Single Pole Each 6 256.00 1,536.00

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Supplying & fixing following rating double pole (Single

Phase & Neutral) 240 V, Resudual Curren Circuit

Breaker (RCCB) , having a sensitivity current uo to

17 D.S.R 2.14 300mA in the existing MCB DB complete with

connections, testing and commissioning etc. as

required. Make:-LEGRAND- DX³/SCHNEIDER- ACTI-

9/SIEMENS- BETA GUARD/ L&T- AU VERSION.

Providing & fixing of M.V. danger notice plate of 200

mm x 150 mm, made of mild steel, at least 2 mm thick,

18 and vitreous enamelled white on both sides, and with Each 1 269.00 269.00

inscription in single red colour on front side as

19 EARTHING SYSTEM

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm dia

including accessories, and providing massonry

i) 5.2 enclosure with cover plate having locking arragement Each 1 5,368.00 5,368.00

and watering pipe etc. with charcoal/cock and salt as

Supplying and laying 25 mm X 5 mm GI strip at 0.50

meter below ground/surface as strip earth electrode,

D.S.R. including connection/ terminating with nut, bolt,

5.9 spring, washer etc. as required (Jointing shall be done

by overlapping and with 2 sets of G.I. nut bolt & spring

washer spaced at 50 mm)

20 LIGHTNING CONDUCTOR

Providing and fixing of Lightning Conductor finial,

D.S.R. made of 25 mm dia 300mm ling, copper tube, having

6.2 single prong at top, with 85 mm dia 3 mm thick copper

base plate including holes etc. complete as required.

Providing and fixing G.I. Tape 20mmx3mm thick on

ii) parapat or surface of the wall for lightning conductor Mtr 5 126.00 630.00

complete as required. (for Horizontal Run).

Providing and fixing G.I. Tape 20mmx3mm thick on

iii) parapat or surface of the wall for lightning conductor Mtr 5 197.00 985.00

complete as required. (for Vertical Run).

Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm dia

including accessories, and providing massonry

iv) enclosure with cover plate having locking arragement Each 1 6,855.00 6,855.00

and watering pipe etc. with charcoal/cock and salt as

Supplying and laying 25 mm X 5 mm GI strip at 0.50

meter below ground/surface as strip earth electrode,

D.S.R. including connection/ terminating with nut, bolt,

5.9 spring, washer etc. as required (Jointing shall be done

by overlapping and with 2 sets of G.I. nut bolt & spring

washer spaced at 50 mm)

Laying of I no. PVC insulated and and PVC sheathed

/XLPE power cable of 1.1 KV grade of following size

21 direct in ground including excavation snad cushioning,

protective covering and refilling the trench etc as

7.1.1 Above 35 Sq. mm. and up to 95 Sq. mm Mtr 10 387.00 3,870.00

1.1 KV Cable End Termination:-Supplying and

making indoor cable end termination with brass

22 DSR 9.1 double compression gland and aluminium lugs for

following size of PVC insulated XLPE Al. Ar. Cable of 1.1

KV grade as required.

Providing, laying and fixing following dia G.I. pipe

(medium class) in ground complete with G.I. fittings

including trenching (75 cm deep)and re-filling etc. as

NON SCHEDULE ITEMS (PART-B) (ELECTRICAL)

1 MR LED LUMINAIRES LIGHTS

Note:- All LED Light fittings LM 79 and LM 80 reports

need to be submitted with all accessories. Samples of

alltype LED light fixtures are to be submitted to the

Engineering Incharge and each LED Light should have

100lm/W for the approval prior to procurement of

light fixtures. Make Havels, Bajaj, Philips Jaquar. Make

0f LED Chip_Philips/Osram/Cree/Nichia.

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Supply of 9W/10W LED Bulb (Luminous Flux- 600lm,

CCT-6500K (Cool W 9/10 watt LED Bulb, B22, 6500

Khite), CRI-80, Rated Voltage- 220V/ 240V. Beam

Angle- 120 degree.

Supply of 20 watt LED tube light fitting, 4 feet, IP20,

6500K, Polycarbonate Body, 100 Lumen / Watt.

Supply of 40 watt, 4 feet, IP20 Surface / Suspension

iv) mounting, Extruded Aluminum housing with Lumen Each 1 2,446.00 2,446.00

output of 4800. THD.

Supply of Surface mounted 10 watt, IP65 led Bulkhead,

Polycarbonate body, 6500K,

2 MR FANS & EXHAUST FANS

All Ceiling Fans shall be of I.S.I. Brand and of

minimum 2 years of Warranty and CFM should not be

less than 300. Samples of all Fans are to be submitted

to the Engineer-in- charge for the approval prior to

procurement of Fans. Make:- Usha, Bajaj, Havells,

Supply of regular /standard model A.C ceilling fan of

1200 mm sweep with double ball bearing, down road,

i) 2 nos. canopies including wiring the down rods of Each 4 1,986.00 7,944.00

standard length (upto 30 cm ) with 1.5 sq. mm FR PVC

insulated copper conductor etc.as required.

Sub total of Construction of Store room and wash

C. Repair and renovation works at Chess centre

Taking out old damaged tarfelt/APP membrane from

the roof, parapet etc. preparing the roof surfaces by

removing all spoils, blisters, moss etc. from the

working site and disposal of the same beyond the

compound and cleaning the site in all respect as per

direction of Engineer-in-Charge.

Providing and laying in situ seven course water

proofing treatment with APP (Atactic poly-propylene)

modified Polymeric memberane over roof consisting

of first coat of bitumen primer @ 0.40 litre per sqm,

2nd, 4th & 6th courses of bonding material @ 1.20

Kg/sqm, which shall consist of blown type bitumen of

grade 85/25 conforming to IS : 702, 3rd and 5th layers

of roofing membrane APP modified Polymeric

membrane 1.5 mm thick of 2.25 Kg/sqm weight

consisting of five layers prefabricated with centre core

as 20 micron HMHDPE film sandwiched on both sides

with polymeric mix and the polymeric mix is protected

on both side with 20 micron HMHDPE film. 7th, the top

most layer shall be finished with brick tiles of class

designation 10 grouted with cement mortar 1:3

(1cement : 3 fine sand) mixed with 2% integral water

proofing compound by weight of cement over a 12 mm

layer of cement mortar 1:3 (1cement : 3 fine sand) and

finished neat (item of laying brick tiles shall be paid for

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle

cleats of size 25 mm wide x 1.6 mm thick with flanges

of 27 mm and 37mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and

other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of

1200 mm centre to centre, to which the ceiling section

3 12.45 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450

mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm

long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with

the help of dry wall screws of size 3.5 x 25 mm at 230

mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with

12.5 mm thick tapered edge gypsum plain board

12.45.1 conforming to IS: 2095- (Part I) Sqm 135 1,355.80 183,033.00

:2011 (Board with BIS certification marks)

Providing and laying 60mm thick factory made cement

concrete interlocking paver block of M -30 grade made

by block making machine with strong vibratory

compaction, of approved size, design & shape, laid in

required colour and patternover and including 50mm

thick compacted bed of coarse sand, filling the joints

with line sand etc. all complete as per the direction of

Engineer-in-charge.

Providing and laying at or near ground level factory

made kerb stone of M-25 grade cement concrete in

position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse

sand), including making joints with or without grooves

(thickness of joints except at sharp curve shall

not to more than 5mm), including making drainage

opening wherever required complete etc. as per

direction of Engineer-in-charge (length of finished

kerb edging shall be measured for payment). (Precast

C.C. kerb stone shall be approved by Engineer-in-

Brick work with common burnt clay F.P.S. (non

6 6.1 modular) bricks of class designation 7.5 in foundation

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5 7,132.25 35,661.25

7 Cement Plaster (In Coarse Sand)

13.6 20 mm cement plaster of mix :

Removing white or colour wash by scrapping and sand

8 13.88 papering and preparing the surface smooth including Sqm 900 19.75 17,775.00

necessary repairs to scratches etc. complete

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Distempering with 1st quality acrylic distemper (ready

mixed) having VOC content less than 50 gms/litre, of

approved manufacturer and of required shade and

colour all complete to achieve even shade and colour :

New work (two or more coats) over and including

13.41.1 water thinnable priming coat with cement primer Sqm 400 185.65 74,260.00

having VOC content less than 50 gms/litre

Finishing walls with Acrylic Smooth exterior paint of

required shade :

New work (Two or more coat applied @ 1.67 ltr/10

13.46.1 sqm over and including priming coat of exterior primer Sqm 500 160.60 80,300.00

applied @ 0.90litre /10 sqm)

Painting with synthetic enamel paint of approved

11 13.62 brand and manufacture of required colour to give an

Two or more coats on new work over an under coat of

13.62.1 suitable shade with ordinary paint of approved brand Sqm 80 226.25 18,100.00

and manufacture

Providing and laying rectified Glazed Ceramic floor

tiles of size 300x300 mm or more (thickness to be

specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in colours

12 11.39 White, Ivory, Grey, Fume Red Brown, laid on 20 mm Sqm 10 1,330.00 13,300.00

thick cement mortar 1:4 (1 Cement: 4 Coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and

matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall

tiles conforming to IS: 15622 (thickness to be specified

by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size

as approved by Engineer in-Charge, in skirting, risers

of steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including

pointing in white cement mixed with pigment of

matching shade complete.

Supplying, fitting & fixing precast garden bench of

different colours. All components are reinforced

suitably for long use and to prevent damaged during

handling, transportation & erection. All parts are

jointed together with galvanized nuts & bolts of

suitable size and bolts are sealed after assembly. Bench

top and back planks are treated with special anti-

corrosion, water proof coating so as to make surfaces

glossy and water proof. All components are

manufactured by using M-30 grade of concrete using

vibro-compaction process. (Make : Bose Abasan

Prakalpa or equivalent make)

Electrical works

A. SCHEDULE ITEMS (DSR-2022) (PART-A)

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Point Wiring in Medium Class PVC Conduit, with

Modular type Switch: Wiring for light point/ fan

point/ exhaust fan point/ call bell point with 1.5 sq.mm

FR PVC insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit, with

modular type switch, modular plate, suitable size of GI

box and earthing the point with 1.5 sq.mm. FR PVC

insulated copper conductor single core cable etc as

required. Make FRLS PVC CU Wire::- Havells, Polycab,

Rajnigandha, RR Cable. (Make of Modular switch

Sockets:- Havells (ATHENA), L&T ENGLAZE), Legrand

(LYNCUS) , Anchor(WOODS), Schneider-(OPEL)

Wiring for light/power plug with 2x4 Sq.mm FR PVC

insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit along

with 1 No. 4 Sq.mm FR PVC insulated copper conductor

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FR PVC insulated

3 D.S.R 1.14 copper condcutor, single core cable in surface/

recessed Medium Class PVC conduit as required.

Make:- Havells, Polycab, Rajnigandha, RR Cable.

1.14.4 2 X 6 sq. mm +1 X 6 sq.mm earth wire. Mtr. 5 439.00 2,195.00

1.14.9 4 X 6 sq.mm + 2 X 6 sq.mm earth wire. Mtr. 5 754.00 3,770.00

Supplying and fixing of following switch/ socket on

4 the existing modular plate & switch box including

connections but excluding modular plate etc. as reqd.

1.24.4 3 pin 5/6A socket outlet Each 16 122.00 1,952.00

Supplying and fixing Stepped type electronic fan

D.S.R. regulator on the existing modular plate & switch box

1.25 including connections but excluding modular plate etc.

Supplying and fixing modular blanking plate on the

6 existing modular plate & switch box excluding modular Each 4 40.00 160.00

plate as required.

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

D.S.R. including providing and fixing 3 pin 5/6 Amp modular

1.31 socket outlet and 5/6 A modular type switch,

connections painting etc. as reqd. (for Light plug

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

8 including providing and fixing 6 pin 5/6 & 15/16 Amp Each 6 586.00 3,516.00

modular socket outlet and 15/16 A modular type

switch, connections painting etc. as reqd.

Supplying & fixing of 3 pin, 5 amp Ceiling rose on the

9 existing junction box/ wooden block including Each 8 87.00 696.00

connection as required.

D.S.R. Supplying and fixing brass batten/angle holder

1.34 including connection etc. as required.

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

D.S.R. types, complete with all accessories and tube/lamp etc.

1.41 directly on ceiling /wall including connections with 1,5

Sq mm FRLS PVC insulated copper conductor, single

core cable and earthing etc. as required

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

types, complete with all accessories and tube/lamp etc.

including supplying and fixing ball and socket

12 arrangement , 2 nos. down rodsof 20mm diax 1.6 mm Each 6 471.00 2,826.00

thick steel conduitup to 30 CM length, paniting and

wiring the down rod and connections with 1.5 Sq MM

FRLS PVC insulated copper conductor, single core cable

and earthing etc. as required.

Installation, testing and commissioning of Ceiling Fans,

including wiring the down rods of standard length (up

13 to 30cm) with 1.5 Sq mm FRLS PVC insulated copper Each 8 213.00 1,704.00

conductor, single core cable and earthing etc. as

Supplying and fixing following way, horizontal type

thee pole & neutral, sheet steel, MCCB distribution

board, 415V, on surface/ recces , complete with tinned

copper bus bar, neutral bar, earth bar, din bar

interconnections, powder painted including earthing

etc. as required (But without MCCB/RCCB/Isolator)

Make:-SIEMENS-Bitaguard, LEGRAND-Ekinox³-,

SCHNEIDER-ACTI-9, L&T-AU

Supplying & fixing 5 amps to 32 amps rating 240/415

volts 10 kA, C curve Miniature Circuit Breaker suitable

for inductive loads of following poles in the existing

MCB DB complete with connections, testing and

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Supplying & fixing following rating double pole (Single

Phase & Neutral) 240 V, Resudual Curren Circuit

Breaker (RCCB) , having a sensitivity current uo to

17 D.S.R 2.14 300mA in the existing MCB DB complete with

connections, testing and commissioning etc. as

required. Make:-LEGRAND- DX³/SCHNEIDER- ACTI-

9/SIEMENS- BETA GUARD/ L&T- AU VERSION.

Providing & fixing of M.V. danger notice plate of 200

mm x 150 mm, made of mild steel, at least 2 mm thick,

18 and vitreous enamelled white on both sides, and with Each 1 269.00 269.00

inscription in single red colour on front side as

Installation of exhaust fan in the existing opening,

19 including making good the damage, connection, testing,

commissioning etc. as required.

1.50.1 Upto 450 mm sweep Each 2 450.00 900.00

Supplying & fixing 5 amps to 32 amps rating 240/415

volts 10 kA, C curve Miniature Circuit Breaker suitable

for inductive loads of following poles in the existing

20 D.S.R 2.10 MCB DB complete with connections, testing and

commissioning etc. as required. (Make:-LEGRAND-

DX³/SCHNEIDER- ACTI-9/SIEMENS- BETA GUARD/

L&T- AU VERSION.)

2.10.1 Single Pole Each 3 256.00 768.00

2.10.5 Triple Pole and neutral Each 3 1,228.00 3,684.00

NON SCHEDULE ITEMS (PART-B) (ELECTRICAL)

1 MR LED LUMINAIRES LIGHTS

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Note:- All LED Light fittings LM 79 and LM 80 reports

need to be submitted with all accessories. Samples of

alltype LED light fixtures are to be submitted to the

Engineering Incharge and each LED Light should have

100lm/W for the approval prior to procurement of

light fixtures. Make Havels, Bajaj, Philips Jaquar. Make

0f LED Chip_Philips/Osram/Cree/Nichia.

Supply of 20 watt LED tube light fitting, 4 feet, IP20,

6500K, Polycarbonate Body, 100 Lumen / Watt.

2 MR FANS & EXHAUST FANS

All Ceiling Fans shall be of I.S.I. Brand and of

minimum 2 years of Warranty and CFM should not be

less than 300. Samples of all Fans are to be submitted

to the Engineer-in- charge for the approval prior to

procurement of Fans. Make:- Usha, Bajaj, Havells,

Supply of regular /standard model A.C ceilling fan of

1200 mm sweep with double ball bearing, down road,

i) 2 nos. canopies including wiring the down rods of Each 10 1,986.00 19,860.00

standard length (upto 30 cm ) with 1.5 sq. mm FR PVC

insulated copper conductor etc.as required.

Supply of 230V AC Exhaust Fan (230mm- 1400 RPM),

ii) double ball bearing (Metal Body- Light Duty) exhaust Each 2 1,704.00 3,408.00

fan as required.

SITC of Low depth recessed 12 watt slim type LED

indoor commercial type downlighter with high

efficiency diffuser and PC reflector including constant

3 MR current integrated driver, die cast heat sink and all Each 7 1,831.00 12,817.00

accessories as required. The model, specifications shall

be finalized by Engineer in charge.

Sub total of Repair and renovation works at Chess

D. Repair and renovation works of Boxing ring

Brick work with common burnt clay F.P.S. (non

1 6.1 modular) bricks of class designation 7.5 in foundation

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 2 7,132.25 14,264.50

2 Cement Plaster (In Coarse Sand)

13.60 20 mm cement plaster of mix :

Removing white or colour wash by scrapping and sand

3 13.88 papering and preparing the surface smooth including Sqm 380 19.75 7,505.00

necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distemper (ready

mixed) having VOC content less than 50 gms/litre, of

approved manufacturer and of required shade and

colour all complete to achieve even shade and colour :

New work (two or more coats) over and including

13.41.1 water thinnable priming coat with cement primer Sqm 200 185.65 37,130.00

having VOC content less than 50 gms/litre

Finishing walls with Acrylic Smooth exterior paint of

required shade :

New work (Two or more coat applied @ 1.67 ltr/10

13.46.1 sqm over and including priming coat of exterior primer Sqm 200 160.60 32,120.00

applied @ 0.90litre /10 sqm)

Painting with synthetic enamel paint of approved

6 13.62 brand and manufacture of required colour to give an

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Two or more coats on new work over an under coat of

13.62.1 suitable shade with ordinary paint of approved brand Sqm 55 226.25 12,443.75

and manufacture

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material and

disposal of unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 2 2,060.20 4,120.40

Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6

graded stone aggregate 20 mm nominal size) over

8 4.17 75mm thick bed of dry brick ballast 40 mm nominal Sqm 100 749.30 74,930.00

size, well rammed and consolidated and grouted with

fine sand, including necessary excavation, levelling &

dressing & finishing the top smooth.

Providing and laying in position cement concrete of

9 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from

4.1.4 natural sources : 4 graded stone aggregate 40 mm Cum 1.2 7,780.30 9,336.36

nominal size derived from natural sources)

Supplying and filling in plinth with sand under floors,

10 2.27 including watering, ramming, consolidating and Cum 8 2,123.75 16,990.00

dressing complete

Providing and fixing factory made uPVC door frame

made of uPVC extruded sections having an overall

dimension as below (tolerance ±1mm), with wall

thickness 2.0 mm (± 0.2 mm), corners of the door

frame to be Jointed with galvanized brackets and

stainless steel screws, joints mitred and Plastic

welded. The hinge side vertical of the frames

reinforced by galvanized M.S. tube of size 19 X 19 mm

and 1mm (± 0.1 mm) wall thickness and 3 nos.

stainless steel hinges fixed to the frame complete as

per manufacturer’s specification and direction of

Engineer- in-charge

9.117.1 Extruded section profile size 48x40 mm Metre 15 270.20 4,053.00

12 9.118 Providing and fixing to existing door frames.

30 mm thick factory made Polyvinyl Chloride (PVC)

door shutter made of styles and rails of a PVC hollow

section of size 60x30 mm and wall thickness 2 mm

(± 0.2 mm), with inbuilt decorative moulding edging on

one side. The styles and rails mitred and joint at the

corners by means of M.S. galvanised/ plastic

brackets of size 75x220 mm having wall thickness 1.0

mm and stainless steel screws. The styles of the

shutter reinforced by inserting galvanised M.S. tube of

size 25x20 mm and 1 mm (± 0.1 mm) wall thickness.

9.118.2 The lock rail made up of 'H' section, a PVC hollow Sqm 5 3,253.80 16,269.00

section of size 100x30 mm and 2 mm (± 0.2 mm) wall

thickness fixed to the shutter styles by means of

plastic/ galvanised M.S. 'U' cleats. The shutter frame

filled with a PVC multi-chambered single panel of size

not less than 620 mm, having over all thickness of 20

mm and 1 mm (± 0.1 mm) wall thickness . The panels

filled vertically and tie bar at two places by inserting

horizontally 6 mm galvanised M.S. rod and fastened

with nuts and washers, complete as per manufacturer's

specification and direction of Engineer-in-charge.

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed

13 9.1 and fixed in position with hold fast lugs or with dash

fasteners of required dia & length (hold fast lugs or

dash fastener shall be paid for separately).

9.1.3 Kiln seasoned and chemically treated hollock wood Cum 0.3 83,378.05 25,013.42

Providing and fixing panelled or panelled and glazed

shutters for doors, windows and clerestory windows,

fixing with butt hinges of required size with necessary

14 9.5 screws, excluding panelling which will be paid for

separately, all complete as per direction of Engineer-in-

charge. (Note:- Butt hinges and necessary screws shall

be paid separately)

9.5.2 Kiln seasoned and chemically treated hollock wood

9.5.2.2 30 mm thick shutters Sqm 10 2,676.85 26,768.50

Providing and fixing water closet squatting pan (Indian

type W.C. pan ) with 100 mm sand cast Iron P or S trap,

10 litre low level white P.V.C. flushing cistern,

15 17.1 including flush pipe, with manually controlled device

(handle lever) conforming to IS : 7231, with all fittings

and fixtures complete, including cutting and making

good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size

17.1.1 580x440 mm with integral Each 3 6,767.40 20,302.20

type foot rests

Dismantling roofing including ridges, hips, valleys and

16 15.28 gutters etc., and stacking the material within 50 metres

Providing and fixing precoated galvanised iron profile

sheets (size, shape and pitch of corrugation as

approved by Engineer-in-charge) 0.50 mm (+ 0.05 %)

total coated thickness with zinc coating 120 grams per

sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns

epoxy primer on both side of the sheet and polyester

top coat 15-18 microns. Sheet should have protective

guard film of 25 microns minimum to avoid scratches

during transportation and should be supplied in single

length upto 12 metre or as desired by Engineer-in-

charge. The sheet shall be fixed using self drilling /self

tapping screws of size (5.5x 55 mm) with EPDM seal,

complete upto any pitch in horizontal/ vertical or

curved surfaces, excluding the cost of purlins, rafters

and trusses and including cutting to size and shape

wherever required.

Wooden scaffolding using ballies for dismantling the

existing roof sheets and fixing of new roof sheets etc.

18 MR complete as per the directions of Engineer in Charge ( Sqm 90 218.33 19,649.70

slab area will be measured for payment) (i/c cost of

lifting charges ).

Electrical works

A. SCHEDULE ITEMS (DSR-2022) (PART-A)

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Point Wiring in Medium Class PVC Conduit, with

Modular type Switch: Wiring for light point/ fan

point/ exhaust fan point/ call bell point with 1.5 sq.mm

FR PVC insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit, with

modular type switch, modular plate, suitable size of GI

box and earthing the point with 1.5 sq.mm. FR PVC

insulated copper conductor single core cable etc as

required. Make FRLS PVC CU Wire::- Havells, Polycab,

Rajnigandha, RR Cable. (Make of Modular switch

Sockets:- Havells (ATHENA), L&T ENGLAZE), Legrand

(LYNCUS) , Anchor(WOODS), Schneider-(OPEL)

Wiring for light/power plug with 2x4 Sq.mm FR PVC

insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit along

with 1 No. 4 Sq.mm FR PVC insulated copper conductor

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FR PVC insulated

3 D.S.R 1.14 copper condcutor, single core cable in surface/

recessed Medium Class PVC conduit as required.

Make:- Havells, Polycab, Rajnigandha, RR Cable.

1.14.4 2 X 6 sq. mm +1 X 6 sq.mm earth wire. Mtr. 10 439.00 4,390.00

1.14.9 4 X 6 sq.mm + 2 X 6 sq.mm earth wire. Mtr. 10 754.00 7,540.00

Supplying and fixing of following switch/ socket on

4 the existing modular plate & switch box including

connections but excluding modular plate etc. as reqd.

1.24.4 3 pin 5/6A socket outlet Each 8 122.00 976.00

Supplying and fixing Stepped type electronic fan

D.S.R. regulator on the existing modular plate & switch box

1.25 including connections but excluding modular plate etc.

Supplying and fixing modular blanking plate on the

6 existing modular plate & switch box excluding modular Each 4 40.00 160.00

plate as required.

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

D.S.R. including providing and fixing 3 pin 5/6 Amp modular

1.31 socket outlet and 5/6 A modular type switch,

connections painting etc. as reqd. (for Light plug

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

8 including providing and fixing 6 pin 5/6 & 15/16 Amp Each 3 586.00 1,758.00

modular socket outlet and 15/16 A modular type

switch, connections painting etc. as reqd.

Supplying & fixing of 3 pin, 5 amp Ceiling rose on the

9 existing junction box/ wooden block including Each 4 87.00 348.00

connection as required.

D.S.R. Supplying and fixing brass batten/angle holder

1.34 including connection etc. as required.

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

D.S.R. types, complete with all accessories and tube/lamp etc.

1.41 directly on ceiling /wall including connections with 1,5

Sq mm FRLS PVC insulated copper conductor, single

core cable and earthing etc. as required

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

types, complete with all accessories and tube/lamp etc.

including supplying and fixing ball and socket

12 arrangement , 2 nos. down rodsof 20mm diax 1.6 mm Each 12 471.00 5,652.00

thick steel conduitup to 30 CM length, paniting and

wiring the down rod and connections with 1.5 Sq MM

FRLS PVC insulated copper conductor, single core cable

and earthing etc. as required.

Installation, testing and commissioning of Ceiling Fans,

including wiring the down rods of standard length (up

13 to 30cm) with 1.5 Sq mm FRLS PVC insulated copper Each 4 213.00 852.00

conductor, single core cable and earthing etc. as

Supplying and fixing following way, horizontal type

thee pole & neutral, sheet steel, MCCB distribution

board, 415V, on surface/ recces , complete with tinned

copper bus bar, neutral bar, earth bar, din bar

interconnections, powder painted including earthing

etc. as required (But without MCCB/RCCB/Isolator)

Make:-SIEMENS-Bitaguard, LEGRAND-Ekinox³-,

SCHNEIDER-ACTI-9, L&T-AU

Supplying & fixing 5 amps to 32 amps rating 240/415

volts 10 kA, C curve Miniature Circuit Breaker suitable

for inductive loads of following poles in the existing

MCB DB complete with connections, testing and

2.10.1 Single Pole Each 8 256.00 2,048.00

2.10.5 Triple Pole and neutral Each 1 1,228.00 1,228.00

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Supplying & fixing following rating double pole (Single

Phase & Neutral) 240 V, Resudual Curren Circuit

Breaker (RCCB) , having a sensitivity current uo to

17 D.S.R 2.14 300mA in the existing MCB DB complete with

connections, testing and commissioning etc. as

required. Make:-LEGRAND- DX³/SCHNEIDER- ACTI-

9/SIEMENS- BETA GUARD/ L&T- AU VERSION.

Providing & fixing of M.V. danger notice plate of 200

mm x 150 mm, made of mild steel, at least 2 mm thick,

18 and vitreous enamelled white on both sides, and with Each 1 269.00 269.00

inscription in single red colour on front side as

Supply and fixing of following size/ modules, GI box

D.S.R. along with modular base & cover plate for modular

1.27 switch/ regulator in recess, including connection as

6 module (200mmx 75mm) (for 2 nos. 6A Sockets &

2no. 6A Switch)

Installation of exhaust fan in the existing opening,

20 including making good the damage, connection, testing,

commissioning etc. as required.

1.50.1 Upto 450 mm sweep Each 2 450.00 900.00

NON SCHEDULE ITEMS (PART-B) (ELECTRICAL)

1 MR LED LUMINAIRES LIGHTS

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Note:- All LED Light fittings LM 79 and LM 80 reports

need to be submitted with all accessories. Samples of

alltype LED light fixtures are to be submitted to the

Engineering Incharge and each LED Light should have

100lm/W for the approval prior to procurement of

light fixtures. Make Havels, Bajaj, Philips Jaquar. Make

0f LED Chip_Philips/Osram/Cree/Nichia.

Supply of 20 watt LED tube light fitting, 4 feet, IP20,

6500K, Polycarbonate Body, 100 Lumen / Watt.

2 MR FANS & EXHAUST FANS

All Ceiling Fans shall be of I.S.I. Brand and of

minimum 2 years of Warranty and CFM should not be

less than 300. Samples of all Fans are to be submitted

to the Engineer-in- charge for the approval prior to

procurement of Fans. Make:- Usha, Bajaj, Havells,

Supply of regular /standard model A.C ceilling fan of

1200 mm sweep with double ball bearing, down road,

i) 2 nos. canopies including wiring the down rods of Each 4 1,986.00 7,944.00

standard length (upto 30 cm ) with 1.5 sq. mm FR PVC

insulated copper conductor etc.as required.

Supply of 230V AC Exhaust Fan (230mm- 1400 RPM),

ii) double ball bearing (Metal Body- Light Duty) exhaust Each 2 1,704.00 3,408.00

fan as required.

Supply, fitting fixing and testing of 63A TP/10kA, C

3 MR Series MCB .(Make:-MCB-LEGRAND- DX³/SCHNEIDER- Each 1 2,220.00 2,220.00

ACTI-9/SIEMENS- BETA GUARD/ L&T- AU VERSION.)

Supply, fitting fixing and testing of 63A FP/10kA, C

4 MR Series MCB .(Make:-MCB-LEGRAND- DX³/SCHNEIDER- Each 1 2,745.00 2,745.00

ACTI-9/SIEMENS- BETA GUARD/ L&T- AU VERSION.)

Sub total of Repair and renovation works of Boxing

DSR 2022 E. Illumination and allied Electrification works at

E&M Burnpur Stadium

SCHEDULE ITEMS (DSR-2022) (PART-A)

Point Wiring in Medium Class PVC Conduit, with

Modular type Switch: Wiring for light point/ fan

point/ exhaust fan point/ call bell point with 1.5 sq.mm

FR PVC insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit, with

modular type switch, modular plate, suitable size of GI

box and earthing the point with 1.5 sq.mm. FR PVC

insulated copper conductor single core cable etc as

required. Make FRLS PVC CU Wire::- Havells, Polycab,

Rajnigandha, RR Cable. (Make of Modular switch

Sockets:- Havells (ATHENA), L&T ENGLAZE), Legrand

(LYNCUS) , Anchor(WOODS), Schneider-(OPEL)

Wiring for light/power plug with 2x4 Sq.mm FR PVC

insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit along

with 1 No. 4 Sq.mm FR PVC insulated copper conductor

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FR PVC insulated

3 D.S.R 1.14 copper condcutor, single core cable in surface/

recessed Medium Class PVC conduit as required.

Make:- Havells, Polycab, Rajnigandha, RR Cable.

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Supplying and fixing of following switch/ socket on

4 the existing modular plate & switch box including

connections but excluding modular plate etc. as reqd.

1.24.4 3 pin 5/6A socket outlet Each 8 122.00 976.00

Supplying and fixing Stepped type electronic fan

D.S.R. regulator on the existing modular plate & switch box

1.25 including connections but excluding modular plate etc.

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

D.S.R. including providing and fixing 3 pin 5/6 Amp modular

1.31 socket outlet and 5/6 A modular type switch,

connections painting etc. as reqd. (for Light plug

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

8 including providing and fixing 6 pin 5/6 & 15/16 Amp Each 8 586.00 4,688.00

modular socket outlet and 15/16 A modular type

switch, connections painting etc. as reqd.

Supplying & fixing of 3 pin, 5 amp Ceiling rose on the

9 existing junction box/ wooden block including Each 6 87.00 522.00

connection as required.

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

types, complete with all accessories and tube/lamp etc.

including supplying and fixing ball and socket

10 arrangement , 2 nos. down rodsof 20mm diax 1.6 mm Each 20 471.00 9,420.00

thick steel conduitup to 30 CM length, paniting and

wiring the down rod and connections with 1.5 Sq MM

FRLS PVC insulated copper conductor, single core cable

and earthing etc. as required.

Installation, testing and commissioning of Ceiling Fans,

including wiring the down rods of standard length (up

11 to 30cm) with 1.5 Sq mm FRLS PVC insulated copper Each 20 213.00 4,260.00

conductor, single core cable and earthing etc. as

Supplying & fixing 5 amps to 32 amps rating 240/415

volts 10 kA, C curve Miniature Circuit Breaker suitable

for inductive loads of following poles in the existing

MCB DB complete with connections, testing and

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Supplying & fixing following rating double pole (Single

Phase & Neutral) 240 V, Resudual Curren Circuit

Breaker (RCCB) , having a sensitivity current uo to

14 D.S.R 2.14 300mA in the existing MCB DB complete with

connections, testing and commissioning etc. as

required. Make:-LEGRAND- DX³/SCHNEIDER- ACTI-

9/SIEMENS- BETA GUARD/ L&T- AU VERSION.

Providing & fixing of M.V. danger notice plate of 200

mm x 150 mm, made of mild steel, at least 2 mm thick,

15 and vitreous enamelled white on both sides, and with Each 1 269.00 269.00

inscription in single red colour on front side as

NON SCHEDULE ITEMS (PART-B) (ELECTRICAL)

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Note:- All LED Light fittings LM 79 and LM 80 reports

need to be submitted with all accessories. Samples of

alltype LED light fixtures are to be submitted to the

1 MR Engineering Incharge and each LED Light should have

100lm/W for the approval prior to procurement of

light fixtures. Make Havels, Bajaj, Philips Jaquar. Make

0f LED Chip_Philips/Osram/Cree/Nichia.

Supply of 20 watt LED tube light fitting, 4 feet, IP20,

6500K, Polycarbonate Body, 100 Lumen / Watt.

All Ceiling Fans shall be of I.S.I. Brand and of

minimum 2 years of Warranty and CFM should not be

less than 300. Samples of all Fans are to be submitted

to the Engineer-in- charge for the approval prior to

procurement of Fans. Make:- Usha, Bajaj, Havells,

Supply of regular /standard model A.C ceilling fan of

1200 mm sweep with double ball bearing, down road,

i) 2 nos. canopies including wiring the down rods of Each 20 1,986.00 39,720.00

standard length (upto 30 cm ) with 1.5 sq. mm FR PVC

insulated copper conductor etc.as required.

Supplying, installation, testing and commissioning of

LED flood light fitting of 150 watts, Luminaire having

system output >= 18000 lm, Luminaire efficacy>=120

lm/W, CCT = Range 3000K to 5700K (as required and

approved by Ein-C)), Powder coated die cast

aluminium housing, CRI (Ra) > 70, luminaire life >=

50000hrs@L70, conforming to IP 66 or better

complete in all respect i/c inbuilt BIS approved

Electronic driver suitable for operation on 230V, single

phase AC supply, having THD < 10%, PF > 0.9,

complete with mounting of fixture on the existing pole

bracket of pole of height upto 9 mtr. with necessary

mounting accessories as per site requirement

including connection with 2.5 sqmm. FRLS Copper

conductor single core cable and earthing etc. as

Supply of Hot dip Galvaized swaged type Steel Tubular

pole of 6 mtr. length with MS base base plate (200 mm

x 200 mm x 6mm), pole cap and 1000 mm long arm

bracket. The rate is inlcusive of 4 nos. J hook type

foundation bolt to be laid into each pole pedestal along

with 2 nos. nut and washers as required. 2 nos. Suction

pipes as per the required length to be inserted into

4 MR pole pedestal for the laying of the cables. The pole Each 5 9,155.50 45,777.50

should have the provision near the bottom for the

fixing of 4 pole connector/terminal. The rate is

inclusive of the SITC of the 4 pole connector/termianl.

The base of the poles shall be having 4 nos. holes for

the provision of fixing it over the already laid j type

foundation bolt into the pedestal all complete as per

directions of Engineer In charge.

Erection of 6 meter swaged type steel tubular pole on

Concrete foundation of size 500mm x 500mm x 750

mm (500 mm below ground level and 250 mm above

5 MR ground level). The rate is inclusive of all the allied civil Each 5 7,042.75 35,213.75

works like excavation, reinforcement, reinforced

cement concrete etc. all complete as per the directions

of Engineer In charge.

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Supply installation and commissioning of 120 watt LED

Street Light fixure of approved make complete with

6 MR lamp, electric ballast etc as required. The model, clour, Each 5 5,211.60 26,058.00

specifications etc. shall be finalized as per directions of

Engineer In charge.

Sub total of Electrification works at Burnpur

F. Construction of MS shade at cricket ground

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc., including

cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer, including

welding and bolted with special shaped washers etc.

10.16.1 Hot finished welded type tubes Kg 23000 194.40 4,471,200.00

Extra for providing and fixing wind ties of 40x 6 mm

flat iron section.

Providing and fixing precoated galvanised iron profile

sheets (size, shape and pitch of corrugation as

approved by Engineer-in-charge) 0.50 mm (+ 0.05 %)

total coated thickness with zinc coating 120 grams per

sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns

epoxy primer on both side of the sheet and polyester

top coat 15-18 microns. Sheet should have protective

guard film of 25 microns minimum to avoid scratches

3 12.5 during transportation and should be supplied in single Sqm 250 738.65 184,662.50

length upto 12 metre or as desired by Engineer-in-

charge. The sheet shall be fixed using self drilling /self

tapping screws of size (5.5x 55 mm) with EPDM seal,

complete upto any pitch in horizontal/ vertical or

curved surfaces, excluding the cost of purlins, rafters

and trusses and including cutting to size and shape

wherever required.

Providing and fixing precoated galvanised steel sheet

roofing accessories 0.50 mm (+0.05 %) total coated

thickness, Zinc coating 120 grams per sqm as per IS:

4 12.51 277, in 240 mpa steel grade, 5-7 microns epoxy primer

on both side of the sheet and polyester top coat 15-18

microns using self drilling/ self tapping screws

Painting with synthetic enamel paint of approved

5 13.62 brand and manufacture of required colour to give an

Two or more coats on new work over an under coat of

13.62.1 suitable shade with ordinary paint of approved brand Sqm 100 226.25 22,625.00

and manufacture

Providing and fixing on wall face unplasticised Rigid

PVC rain water pipes conforming to IS : 13592 Type A,

6 12.41 including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC

moulded fittings/accessories for unplasticised Rigid

7 12.42 PVC rain water pipes conforming to IS : 13592 Type A,

including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.

2.6.1 All kinds of soil Cum 15 177.50 2,662.50

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

9 2.25 exceeding 20cm in depth, consolidating each deposited Cum 3 196.00 588.00

layer by ramming and watering, lead up to 50 m and

lift upto 1.5 m.

Providing and laying in position cement concrete of

10 4.10 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

4.1.5 natural sources : 6 graded stone aggregate 20 mm Cum 1 7,294.70 7,294.70

nominal size derived from natural sources)

Providing and laying in position cement concrete of

11 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived

4.1.2 from natural sources : 3 graded stone aggregate 20 mm Cum 8.75 8,340.85 72,982.44

nominal size derived from natural sources)

Centering and shuttering including strutting, propping

etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass

Steel reinforcement for R.C.C. work including

13 5.22 straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D

All charges for the preparation of the structural

drawings of the proposed MS shade. The designing is

to be done within the sanctioned cost for the shade

work. The contractor shall be able to start the work

after the obtaining of the vetted drawings and

submission of the same to NBCC.

Sub total of Construction of MS shade at cricket

G. Repair and renovation works of Sports house

complex along with external street light works &

waterproofing of gym terrace

i) Iron gym and multi gym building

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material and

1 15.70 disposal of unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 5 2,060.20 10,301.00

Providing and laying in position cement concrete of

2 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from

4.1.4 natural sources : 4 graded stone aggregate 40 mm Cum 5 7,780.30 38,901.50

nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non

3 6.1 modular) bricks of class designation 7.5 in foundation

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 4 7,132.25 28,529.00

4 Cement Plaster (In Coarse Sand)

13.6 20 mm cement plaster of mix :

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing and laying Vitrified tiles in floor in different

sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming

to IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey

5 11.41A cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc.

The tiles must be cut with the zero chipping diamond

cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness,

leveling system and rubber mallet for placing the tiles

gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer), with

water absorption less than 0.08 % and conforming to

I.S. 15622, of approved make, in all colours & shade, in

6 11.46 skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1 cement: 3 coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sqm including grouting

the joint with white cement & matching pigments etc.

Removing white or colour wash by scrapping and sand

7 13.88 papering and preparing the surface smooth including Sqm 1500 19.75 29,625.00

necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distemper (ready

mixed) having VOC content less than 50 gms/litre, of

approved manufacturer and of required shade and

colour all complete to achieve even shade and colour :

New work (two or more coats) over and including

9 13.41.1 water thinnable priming coat with cement primer Sqm 800 185.65 148,520.00

having VOC content less than 50 gms/litre

Finishing walls with Acrylic Smooth exterior paint of

required shade :

New work (Two or more coat applied @ 1.67 ltr/10

13.46.1 sqm over and including priming coat of exterior primer Sqm 200 160.60 32,120.00

applied @ 0.90litre /10 sqm)

Painting top of roofs with bitumen of approved quality

@ 17kg per 10 sqm impregnated with a coat of coarse

11 12.15 sand at 60 cudm per 10 sqm, including cleaning the

slab surface with brushes and finally with a piece of

cloth lightly soaked in kerosene oil complete :

12.15.1 With residual type petroleum bitumen of grade VG -10 Sqm 460 166.20 76,452.00

Providing and laying four courses water proofing

treatment with bitumen felt over roofs consisting of

first and third courses of blown bitumen 85/25 or 90/

15 conforming to IS : 702 applied hot @ 1.45 Kg per

square metre of area for each course, second course of

12 22.8 roofing felt type 3 grade-I (hessian based self

finished bitumen felt) and fourth and final course of

stone grit 6 mm and down size or pea sized gravel

spread at 6 cubic decimeter per square metre,

including preparation of surface but excluding grading

complete with :

Bitumen felt (hessian base) type 3 grade I conforming

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing and fixing Ist quality ceramic glazed wall

tiles conforming to IS: 15622 (thickness to be specified

by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size

as approved by Engineer in-Charge, in skirting, risers

of steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including

pointing in white cement mixed with pigment of

matching shade complete.

Dismantling tile work in floors and roofs laid in cement

14 15.23 mortar including stacking material within 50 metres

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 190 73.40 13,946.00

Sub total of iron gym and multi gym building 1,380,998.65

ii) Electrical works

A. SCHEDULE ITEMS (DSR-2022) (PART-A)

Point Wiring in Medium Class PVC Conduit, with

Modular type Switch: Wiring for light point/ fan

point/ exhaust fan point/ call bell point with 1.5 sq.mm

FR PVC insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit, with

modular type switch, modular plate, suitable size of GI

box and earthing the point with 1.5 sq.mm. FR PVC

insulated copper conductor single core cable etc as

required. Make FRLS PVC CU Wire::- Havells, Polycab,

Rajnigandha, RR Cable. (Make of Modular switch

Sockets:- Havells (ATHENA), L&T ENGLAZE), Legrand

(LYNCUS) , Anchor(WOODS), Schneider-(OPEL)

Wiring for light/power plug with 2x4 Sq.mm FR PVC

insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit along

with 1 No. 4 Sq.mm FR PVC insulated copper conductor

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FR PVC insulated

3 D.S.R 1.14 copper condcutor, single core cable in surface/

recessed Medium Class PVC conduit as required.

Make:- Havells, Polycab, Rajnigandha, RR Cable.

Supplying and fixing of following switch/ socket on

4 the existing modular plate & switch box including

connections but excluding modular plate etc. as reqd.

1.24.4 3 pin 5/6A socket outlet Each 10 122.00 1,220.00

Supplying and fixing Stepped type electronic fan

D.S.R. regulator on the existing modular plate & switch box

1.25 including connections but excluding modular plate etc.

Supplying and fixing modular blanking plate on the

6 existing modular plate & switch box excluding modular Each 10 40.00 400.00

plate as required.

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

D.S.R. including providing and fixing 3 pin 5/6 Amp modular

1.31 socket outlet and 5/6 A modular type switch,

connections painting etc. as reqd. (for Light plug

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess

8 including providing and fixing 6 pin 5/6 & 15/16 Amp Each 10 586.00 5,860.00

modular socket outlet and 15/16 A modular type

switch, connections painting etc. as reqd.

Supplying & fixing of 3 pin, 5 amp Ceiling rose on the

9 existing junction box/ wooden block including Each 6 87.00 522.00

connection as required.

D.S.R. Supplying and fixing brass batten/angle holder

1.34 including connection etc. as required.

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

D.S.R. types, complete with all accessories and tube/lamp etc.

1.41 directly on ceiling /wall including connections with 1,5

Sq mm FRLS PVC insulated copper conductor, single

core cable and earthing etc. as required

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

types, complete with all accessories and tube/lamp etc.

including supplying and fixing ball and socket

12 arrangement , 2 nos. down rodsof 20mm diax 1.6 mm Each 10 471.00 4,710.00

thick steel conduitup to 30 CM length, paniting and

wiring the down rod and connections with 1.5 Sq MM

FRLS PVC insulated copper conductor, single core cable

and earthing etc. as required.

Installation, testing and commissioning of Ceiling Fans,

including wiring the down rods of standard length (up

13 to 30cm) with 1.5 Sq mm FRLS PVC insulated copper Each 28 213.00 5,964.00

conductor, single core cable and earthing etc. as

Supplying and fixing following way, horizontal type

thee pole & neutral, sheet steel, MCCB distribution

board, 415V, on surface/ recces , complete with tinned

copper bus bar, neutral bar, earth bar, din bar

interconnections, powder painted including earthing

etc. as required (But without MCCB/RCCB/Isolator)

Make:-SIEMENS-Bitaguard, LEGRAND-Ekinox³-,

SCHNEIDER-ACTI-9, L&T-AU

Supplying & fixing 5 amps to 32 amps rating 240/415

volts 10 kA, C curve Miniature Circuit Breaker suitable

for inductive loads of following poles in the existing

MCB DB complete with connections, testing and

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Supplying & fixing following rating double pole (Single

Phase & Neutral) 240 V, Resudual Curren Circuit

Breaker (RCCB) , having a sensitivity current uo to

17 D.S.R 2.14 300mA in the existing MCB DB complete with

connections, testing and commissioning etc. as

required. Make:-LEGRAND- DX³/SCHNEIDER- ACTI-

9/SIEMENS- BETA GUARD/ L&T- AU VERSION.

Providing & fixing of M.V. danger notice plate of 200

mm x 150 mm, made of mild steel, at least 2 mm thick,

18 and vitreous enamelled white on both sides, and with Each 4 269.00 1,076.00

inscription in single red colour on front side as

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Supplying and drawing following sizes of FRLS PVC

insulated copper conductor, single core cable in the

existing surface/ recessed steel / PVC conduit as

NON SCHEDULE ITEMS (PART-B) (ELECTRICAL)

1 MR LED LUMINAIRES LIGHTS

Note:- All LED Light fittings LM 79 and LM 80 reports

need to be submitted with all accessories. Samples of

alltype LED light fixtures are to be submitted to the

Engineering Incharge and each LED Light should have

100lm/W for the approval prior to procurement of

light fixtures. Make Havels, Bajaj, Philips Jaquar. Make

0f LED Chip_Philips/Osram/Cree/Nichia.

Supply of 9W/10W LED Bulb (Luminous Flux- 600lm,

CCT-6500K (Cool W 9/10 watt LED Bulb, B22, 6500

Khite), CRI-80, Rated Voltage- 220V/ 240V. Beam

Angle- 120 degree.

Supply of 20 watt LED tube light fitting, 4 feet, IP20,

6500K, Polycarbonate Body, 100 Lumen / Watt.

Supply of 40 watt, 4 feet, IP20 Surface / Suspension

iv) mounting, Extruded Aluminum housing with Lumen Each 1 2,446.00 2,446.00

output of 4800. THD.

Supply of Surface mounted 10 watt, IP65 led Bulkhead,

Polycarbonate body, 6500K,

2 MR FANS & EXHAUST FANS

All Ceiling Fans shall be of I.S.I. Brand and of

minimum 2 years of Warranty and CFM should not be

less than 300. Samples of all Fans are to be submitted

to the Engineer-in- charge for the approval prior to

procurement of Fans. Make:- Usha, Bajaj, Havells,

Supply of regular /standard model A.C ceilling fan of

1200 mm sweep with double ball bearing, down road,

i) 2 nos. canopies including wiring the down rods of Each 28 1,986.00 55,608.00

standard length (upto 30 cm ) with 1.5 sq. mm FR PVC

insulated copper conductor etc.as required.

Supply of 230V AC Exhaust Fan (230mm- 1400 RPM),

ii) double ball bearing (Metal Body- Light Duty) exhaust Each 10 1,704.00 17,040.00

fan as required.

Supply, installation testing and commissioning of wall

mounting fan of approved make. The size of the blade

will be 400 mm (16 inches), 60 Watt oscillating wall

iii) fan, three number of blades. The rate is inclusive of all Each 18 2,817.00 50,706.00

the allied civil works, if any required for the SITC of the

wall fan complete as per the directions of Engineer in

3 MR STREET LIGHTING FIXTURES

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Supply of Hot dip Galvaized swaged type Steel Tubular

pole of 6 mtr. length with MS base base plate (200 mm

x 200 mm x 6mm), pole cap and 1000 mm long arm

bracket. The rate is inlcusive of 4 nos. J hook type

foundation bolt to be laid into each pole pedestal along

with 2 nos. nut and washers as required. 2 nos. Suction

pipes as per the required length to be inserted into

i) pole pedestal for the laying of the cables. The pole Each 5 9,155.50 45,777.50

should have the provision near the bottom for the

fixing of 4 pole connector/terminal. The rate is

inclusive of the SITC of the 4 pole connector/termianl.

The base of the poles shall be having 4 nos. holes for

the provision of fixing it over the already laid j type

foundation bolt into the pedestal all complete as per

directions of Engineer In charge.

Erection of 6 meter swaged type steel tubular pole on

Concrete foundation of size 500mm x 500mm x 750

mm (500 mm below ground level and 250 mm above

ii) ground level). The rate is inclusive of all the allied civil Each 5 7,042.75 35,213.75

works like excavation, reinforcement, reinforced

cement concrete etc. all complete as per the directions

of Engineer In charge.

Supply installation and commissioning of 120 watt LED

Street Light fixure of approved make complete with

iii) lamp, electric ballast etc as required. The model, clour, Each 5 5,211.60 26,058.00

specifications etc. shall be finalized as per directions of

Engineer In charge.

Sub total of Electrical works 420,101.25

iii) Repairing of basketball court

Demolishing cement concrete manually/ by

mechanical means including disposal of material

1 15.2 within 50 metres lead as per direction of Engineer - in -

Nominal concrete 1:3:6 or richer mix (i/c equivalent

Disposal of building rubbish / malba / similar

unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting,

2 15.6 unloading to approved municipal dumping ground or Cum 21 263.95 5,542.95

as approved by Engineer-in-charge, beyond 50 m

initial lead, for all leads including all lifts involved.

Centering and shuttering including strutting, propping

etc. and removal of form for

5.9.16 Edges of slabs and breaks in floors and walls

Providing and laying C.C. pavement of mix M-25 with

ready mixed concrete from batching plant. The ready

mixed concrete shall be laid and finished with

screed board vibrator , vacuum dewatering process

and finally finished by floating, brooming with wire

brush etc. complete as per specifications and

directions of Engineer-in-charge. (The panel shuttering

work shall be paid for separately).

(Note:- Cement content considered in this item is @

330 kg/cum. Excess/less cement used as per design Cum 47.8 9,823.80 469,577.64

mix is payable/ recoverable separately).

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias

and similar locations of required size, approved shade,

colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated

with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding

and polishing of edges to give high gloss finish etc.

complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby red

8.2.2.1 Area of slab upto 0.50 sqm Sqm 3.5 5,413.50 18,947.25

Finishing with Epoxy paint (two or more coats) at all

locations prepared and applied as per manufacturer's

specifications including appropriate priming coat,

preparation of surface, etc. complete.

13.52.2 On concrete work Sqm 500 235.15 117,575.00

Note: The epoxy paint to be done on the finished

concrete surface for the marking and painting of the

basketball court as per the standards of the basketball

court and approved by the Engineer In charge.

Providing and filling in position rubberized bitumen

hot sealing compound for sealing of expansion joints in

roads / pavements all complete as per direction of

the Engineer-in-Charge

Using grade 'A' sealing compound conforming to IS: cm

Groove Cutting in RCC Road of size 5 mm

width and 10 mm depth for expansion in

concrete surface all complete a sper direction

of Engineer-in-charge.

Sub total of Repairing of basketball court 706,985.59

Sub total of Repair and renovation works of Sports

house complex along with external street light

works & waterproofing of gym terrace

H. Miscellaneous works at Nehru park

i) Outbound training facilities

Design, Supply & Installation of HIGH ROPE COURSE

having following features:-1. HEIGHT OF ACTIVITIES -

2. LENGTH OF ACTIVITY - 09MTR PER ACTIVITY

NO. OF ACTIVITIES - 08 ACTIVITIES (SWINGING LOGS,

HAPPY HOPPER, ZIG-ZAG BRIDGE, BURMA BRIDGE,

SWINGING PLATFORMS, MIND YOUR STEP, WINDOWS,

1 MR 3. DIFFICULTY LEVEL - EASY TO MODERATE Lot 1 800,000.00 800,000.00

4. RESCUE STAIRS - 07 POINTS

5. BELAY SYSTEM - CONTINUOUS BELAY SYSTEM

6. WIRE - 10MM TO 12MM

7. SAFETY SYSTEM - ALL SAFETY SYSTEM MEET THE

EUROPEAN OR EQUIVALENT INDIAN STANDARDS

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Design Supply and installation of ZIG – ZAG BALANCE

BEAM having following features: STRUCTURE - MS

Design, Supply & Installation of COMMANDO TUNNEL

having following features:

3 MR STRUCTURE - MS STEEL Each 1 100,000.00 100,000.00

Diameter - 0.60 MTR.

Design, Supply & Installation of PYRAMID CLIMBING

having following features:

Design, Supply & Installation of MONKEY BAR having

following features:

Design, Supply & Installation of COMMANDO NET

having following features:STRUCTURE - MS STEEL

Supply of Technical Equipments like Full body harness,

7 MR Helmet, crash pad, duffle bag, continous belay pulley Lot 1 200,000.00 200,000.00

for high rope course, etc.

Sub total of Outbound training facilities 1,500,000.00

ii) Chain link Fencing work

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.

2.6.1 All kinds of soils Cum 8 177.50 1,420.00

Providing and laying in position cement concrete of

2 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

4.1.5 natural sources : 6 graded stone aggregate 20 mm Cum 4 7,294.70 29,178.80

nominal size derived from natural sources)

Steel work welded in built up sections/framed work

including cutting hoisting, fixing in position and

applying a priming coat of approved steel primer using

structural steel, etc. as required.

in gratings, frames, guard bar, ladders, railings,

brackts. gates & similar works.

Providing and fixing G.I. chain link fabric fencing of

required width in mesh size 50x50 mm including

4 16.70 strengthening with 2 mm dia wire or nuts, bolts and

washers as required complete as per the direction of

Engineer-in-charge.

16.70.1 Made of G.I. wire of dia 4 mm Sqm. 122 1,017.80 124,171.60

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Painting with synthetic enamel paint of approved

5 13.61 brand and manufacture of required colour to give an

13.61.1 Two or more coats on new work Sqm 42.5 155.90 6,625.75

Brick work with common burnt clay F.P.S. (non

6 6.1 modular) bricks of class designation 7.5 in foundation

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 2.55 7,132.25 18,187.24

7 Cement Plaster (In Coarse Sand)

13.6 20 mm cement plaster of mix :

Subtotal of Chain link Fencing work 380,837.39

iii) Construction of Gazebo

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.

2.6.1 All kinds of soils Cum 25 177.50 4,437.50

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

2 2.25 exceeding 20cm in depth, consolidating each deposited Cum 20 196.00 3,920.00

layer by ramming and watering, lead up to 50 m and

lift upto 1.5 m.

Providing and laying in position cement concrete of

3 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

4.1.5 natural sources : 6 graded stone aggregate 20 mm Cum 3 7,294.70 21,884.10

nominal size derived from natural sources)

Supplying and filling in plinth with sand under floors,

4 2.27 including watering, ramming, consolidating and Cum 20 2,123.75 42,475.00

dressing complete

Providing and laying in position cement concrete of

5 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived

from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources)

Providing and laying cement concrete in retaining

walls, return walls, walls (any thickness) including

attached pilasters, columns, piers, abutments, pillars,

posts, struts, buttresses, string or lacing courses,

parapets, coping, bed blocks, anchor blocks, plain

window sills, fillets, sunken floor etc., up to floor five

level, excluding the cost of centering, shuttering and

1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived

from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources).

Centering and shuttering including strutting, propping

etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass

Suspended floors, roofs, landings, balconies and access

Lintels, beams, plinth beams, girders, bressumers and

Columns, Pillars, Piers, Abutments, Posts and Struts

Weather shade, Chajjas, corbels etc., including edges

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Steel reinforcement for R.C.C. work including

8 5.22 straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D

Steel reinforcement for R.C.C. work including

9 5.22A straightening, cutting, bending, placing in position and

binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D

Brick work with common burnt clay F.P.S. (non

10 6.1 modular) bricks of class designation 7.5 in foundation

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6 7,132.25 42,793.50

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in

all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 3 9,105.95 27,317.85

Cement Plaster (In Coarse Sand)

12 13.6 20 mm cement plaster of mix :

13 13.4 12 mm cement plaster of mix :

Distempering with 1st quality acrylic distemper (ready

mixed) having VOC content less than 50 gms/litre, of

approved manufacturer and of required shade and

colour all complete to achieve even shade and colour :

New work (two or more coats) over and including

13.41.1 water thinnable priming coat with cement primer Sqm 25 185.65 4,641.25

having VOC content less than 50 gms/litre

Finishing walls with Acrylic Smooth exterior paint of

required shade :

New work (Two or more coat applied @ 1.67 ltr/10

13.46.1 sqm over and including priming coat of exterior primer Sqm 25 160.60 4,015.00

applied @ 0.90litre /10 sqm)

Providing and laying Vitrified tiles in floor in different

sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming

to IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey

16 11.41A cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc.

The tiles must be cut with the zero chipping diamond

cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness,

leveling system and rubber mallet for placing the tiles

gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer), with

water absorption less than 0.08 % and conforming to

I.S. 15622, of approved make, in all colours & shade, in

17 11.46 skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1 cement: 3 coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sqm including grouting

the joint with white cement & matching pigments etc.

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6

graded stone aggregate 20 mm nominal size) over

18 4.17 75mm thick bed of dry brick ballast 40 mm nominal Sqm 15 749.30 11,239.50

size, well rammed and consolidated and grouted with

fine sand, including necessary excavation, levelling &

dressing & finishing the top smooth.

Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills,

facias and similar locations of required size, approved

shade, colour and texture laid over 20 mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand), joints

treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing of edges to give high gloss

finish etc. complete at all levels

Granite stone slab of colour black, Cherry/Ruby red

8.2.2.1 Area of slab upto 0.50 sqm Sqm 10 5,413.50 54,135.00

Providing edge moulding to 18 mm thick marble stone

20 8.3 counters, Vanities etc.,including machine polishing to

edge to give high gloss finish etc. complete as per

design approved by Engineer-in-Charge.

8.3.2 Granite work Metre 20 510.95 10,219.00

Steel work welded in built up sections/framed work

including cutting hoisting, fixing in position and

applying a priming coat of approved steel primer using

structural steel, etc. as required.

in gratings, frames, guard bar, ladders, railings,

brackts. gates & similar works.

All charges for the preparation of architectural and

22 MR structural drawings of the building. The contractor LS 1 35,214.00 35,214.00

shall be able to start the work after the obtaining of the

vetted drawings and submission of the same to NBCC.

Subtotal of Construction of Gazebo 918,977.65

iv) Illumination and allied electrical works at

Supplying and drawing following sizes of FRLS PVC

insulated copper conductor, single core cable in the

existing surface/recessed steel/ PVC conduit as

Supplying, installation, testing and commissioning of

Post Top LED light fitting of not more than 40 watts,

Luminaire having system output >= 3500 lm,

Luminaire efficacy>=100 lm/W, CCT = Range 3000K to

5700K (as required and approved by E-in-C)), Powder

coated die cast aluminium housing, CRI (Ra) > 70,

luminaire life >= 50000hrs@L70, conforming to IP 66

or better complete in all respect i/c inbuilt BIS

approved Electronic driver suitable for operation on

230V, single phase AC supply, having THD < 10%, PF >

2 MR 0.9, Surge protection >= (4 KV internal and 10 KV Each 6 8,592.00 51,552.00

external), complete with mounting of fixture on pole/

pillar with necessary mounting accessories as per site

requirement including connection with 2.5 sqmm.

FRLS Copper conductor single core cable and earthing

etc. as required.

Digitally signed by SILKI

S.No. DSR Description of Item Unit Quantity Rate in Rs. Amount in Rs.

Supplying & laying one number XLPE insulated PVC

sheathed Al. Conductor armoured cable of 1.1 KV grade

of following sizes Conforming to IS. 7098/1988

inlcuding making end termination with brass

compression gland and aluminium lugs of the required

Sub total of Illumination and allied electrical works

Sub total of Miscellaneous works at Nehru park 2,900,237.06

Digitally signed by SILKI