Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80,643Accepted-Finance | L1 | Accepted-Finance Found L1 | |
| 2 | L2₹89,522+₹8,879 (11.0%)Accepted-Finance | L2 | Accepted-Finance Found L2 | |
| 3 | L3₹90,160+₹9,517 (11.8%)Accepted-Finance | L3 | Accepted-Finance Found L3 | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹90,000
Closing Date
15 Sept 2021, 9:00 amClosed
FPF Gamma Unit J01 Flying Squad Jammu
FPF Gamma Unit J01 Flying Squad, Forest Protection Force HQ Narwal Jammu
as per BOQ
2021_FD_136259_1
eNIT 7 of 2021-22 dt 25.8.2021 (FPF F/Squad Jammu)
Open Tender
Civil Works
Item Rate
45 days
Forest Protection Force HQ Narwal Jammu
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
FPF Gamma Unit J01 Flying Squad Jammu
Exempted
16 Sept 2021
25 Aug 2021
15 Sept 2021
25 Aug 2021
15 Sept 2021
25 Aug 2021
Amount
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead:1:3:6 or richer mix
Providing and laying of 50mm thick cement concrete flooring in c.conc.1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) without floating coat of neat cement including all leads lift carriage complete
Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete including all leads lift carriage complete
Dismantling G. I. pipes (internal work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 metres lead : metre 15 mm to 40 mm nominal bore.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall 15mm dia. nominal bore -Medium
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: (A) White Vitreous ChinaWhite Vitreous China Wash basin size 630x450 mm with pedestal. Corner type
Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: (A) White Vitreous ChinaWhite Vitreous China Wash basin size 630x450 mm with Pedestal Type.
Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete: 10 litre capacity -White
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.
Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid.
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. a) 15 mm nominal bore
Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms.
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 1 06gms.
Providing and fixing toilet paper holder C.P. brass
Providing and fixing of hand jet
providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete.Flexible pipe 32mm dia
Providing and fixing of 35 liter capacity geyser of isi brand like usha ,havells, bajaj,crompton, recold etc. To be finally finalised by engineer in charge
LED saver 12 watt of approved quality.like Phillips , Osram , Bajaj,Havells, wipro etc. to be inalised by engineer in charge
Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement: 4 coarse sand) including all leads lift carriage complete
Providing and fixing PVC single socketed pipes including collars etc. working pressure of 4kg/sqm of approved make like,supreme,fenolex prince or equivlent in proper line /elignment/gradient including jointing etc. complete with recommended adhesive colour seal ring,110mm dia .
Surinder Kumar
JASBIR PAL SINGH
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .