Construction of Ware house 2,000 MT and Machinary Shed 236.95 Sqm.

Amount

BUILDING STRUCTURE

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means WAREHOUSE BUILDING - 333.48 Cum PROCESSING UNIT - 87.48 Cum TOTAL QTY-420.96Cum

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means WAREHOUSE BUILDING -218.09 Cum PROCESSING UNIT-0.0 Cum TOTAL QTY-218.09 Cum

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. WAREHOUSE BUILDING-254.71 Cum PROCESSING UNIT-60.06Cum TOTAL QTY- 314.80 Cum

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.WAREHOUSE BUILDING- 74.32Cum PROCESSING UNIT- 59.39 Cum TOTAL QTY- 133.71 Cum

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.WAREHOUSE BUILDING- 786.40 Cum PROCESSING UNIT-171.14 Cum TOTAL QTY- 957.54 Cum

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer) WAREHOUSE BUILDING-55.07 Cum PROCESSING UNIT-0.0 Cum TOTAL QTY-55.07 Cum

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) WAREHOUSE BUILDING-148.61 Cum PROCESSING UNIT-27.59 Cum TOTAL QTY-176.20 Cum

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer ) etc. WAREHOUSE BUILDING- 101.89 Cum PROCESSING UNIT-13.50 Cum TOTAL QTY- 115.39 Cum

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) WAREHOUSE BUILDING- 19.18 Cum PROCESSING UNIT-6.98 Cum TOTAL QTY-26.16 Cum

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant WAREHOUSE BUILDING-58.01 Cum PROCESSING UNIT-12.48 Cum TOTAL QTY-70.49 cum

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / granite /gneiss / quartzite metal for R.C.C. fins of required thickness in position as shown on the drawings or as directed by Engineer-in- charge including steel centering, plywood / steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with fully automatic micro processor based PLC with SCADA WAREHOUSE BUILDING-4.56 Cum PROCESSING UNIT- 0.00 Cum TOTAL QTY-4.56 Cum

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) WAREHOUSE BUILDING-5.86 Cum PROCESSING UNIT-0.00 Cum TOTAL QTY-5.86 Cum

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking . WAREHOUSE BUILDING-16.82 MT PROCESSING UNIT-2.89 mt TOTAL QTY-19.31 MT

Providing dry rubble stone pitching 23 cm (about 9 ) thick including all material, quarry spalls, labour etc. complete. WAREHOUSE BUILDING-79.96 sqm PROCESSING UNIT-0.00 sqm TOTAL QTY-79.96 sqm

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. WAREHOUSE BUILDING-23.07 sqm PROCESSING UNIT-6.94 sqm TOTAL QTY-30.01 sqm

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete WAREHOUSE BUILDING-71.54 sqm PROCESSING UNIT-32.94 sqm TOTAL QTY-104.48 sqm

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. WAREHOUSE BUILDING-842.12 Sqm. PROCESSING UNIT-250.19 Sqm TOTAL QTY-1092.31 sqm

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain / obscured glass pans 5 mm thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12 mm 10 cm c/c and oil painting 2 coats etc. complete. WAREHOUSE BUILDING-58.86 sqm PROCESSING UNIT-10.80 sqm TOTAL QTY-69.66 sqm

Providing and applying white-wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. WAREHOUSE BUILDING-842.12 sqm PROCESSING UNIT-250.19 sqm TOTAL QTY-1092.31 sqm

Providing Internal Cement Plaster 20 mm thick in two coats in cement mortar 1:3 without neeru finish to concrete ot brick surfaces, in all positions including scaffolding and curing complete. WAREHOUSE BUILDING-413.18 sqm PROCESSING UNIT-181.35 sqm TOTAL QTY-1092.31 sqm

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. WAREHOUSE BUILDING-842.12 sqm PROCESSING UNIT-250.19 sqm TOTAL QTY-1092.31 sqm

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear ) WAREHOUSE BUILDING-21.42 sqm PROCESSING UNIT-5.36 sqm TOTAL QTY-26.78 sqm

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete . WAREHOUSE BUILDING-798.22 sqm PROCESSING UNIT-183.63 sqm TOTAL QTY- 981.85 sqm

PEB Structure Structural Steel E-350 ( JSW make)

Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E- 350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases,supports, strengthening of steel members etc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete and including Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer-35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts, nuts, washers, welding and electrodes required for the complete work).

Supplying, fabricating, erecting of cold formed light gauge structural steel members cobforming to IS 801/IS 811 hot-dip galvanisede to IS 4759-96 including cutting, welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position WAREHOUSE BUILDING-10.14 MT PROCESSING UNIT-1.5 MT TOTAL QTY-11.54 MT

Supply & fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer with all necessary accessories (Essar) make WAREHOUSE BUILDING-1082.20 SQM PROCESSING UNIT-580.00 SQM TOTAL QTY-1662.20 SQM

ROOF ACCESSORIES Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-

Supply & fixing of PPGI roof accessories of 0.5 mm thick as shown in drawing or as directed by engineer WAREHOUSE BUILDING-104.40 RMT PROCESSING UNIT- 42.00 RMT TOTAL QTY-146.40

Roof Gutter Supplying, fabricating and erecting in position PPGI Eaves Gutter of rquired size with stop end all fixing accessories, drop ends, etc at all elevations level & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc, conforming to latest specifications including cutting, straightening, welding, bending to shapes, bolting etc complete as shown in drawings as per specifications and as directed by engineer in charge WAREHOUSE BUILDING-76.00 RMT PROCESSING UNIT-36.00 RMT TOTAL QTY- 112.00 RMT

providing and fixing of the rain water down take pipes of PPGI , the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimeter of roof area drainded. No spout shall be less than 80 mm in diameter. the spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc, complete as shown in drawing as per specifications and as directed by the engineer in charge WAREHOUSE BUILDING-48 RMT PROCESSING UNIT-16 RMT TOTAL QTY-64 RMT

Providing & fixing wind oppareted tarbo s. s. ventiletar (24 inch dia.) over exsiting roof including cutting of sheet, propar fixing in position to true line & level with all fixtures @ fasting, providind 0.8mm thick FRP sheet for covering area between roof and fan so as to provide waterproof joints with approved waterproofing compound making the roof surface including cleanin etc. (as directed by Engineer in charge) (jalgaon DSR 304/123) WAREHOUSE BUILDING 12 NOS PROCESSING UNIT -2 NOS TOTAL QTY-14 NOS

Supply & fixing of 2mm thk polycarbonate sheet as per drawing & as directed by engineer in charge WAREHOUSE BUILDING -20.70 SQM PROCESSING UNIT-6.00 SQM TOTAL QTY-26.70

Bituminous Road Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from departmental Land)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Providing,laying,spreading and compacting stone aggregate of specific sizes to water bound mecadam specification including spreading in uniform thickness ,hand packing to proper grade and camber , applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate ,watering and compacting with vibratory roller to the required density By Mechanical Means – Grading 1 ( Using Screening Type B ( 11.2 mm ) Aggregate).ITEM NO.3.19

Providing,laying,spreading and compacting stone aggregate of specific sizes to water bound mecadam specification including spreading in uniform thickness ,hand packing to proper grade and camber , applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate ,watering and compacting with vibratory roller to the required density By Mechanical Means – Grading II ( Using Screening Type B ( 11.2 mm ) Aggregate).ITEM NO.3.20

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates)

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) ITEM NO.4.12

ELECTRIFICATION

supplying and ereating armoured cables 3 core 6sq.mm in trenchwall.

supplying and ereating armoured cables 3 core 10 sq.mm in trenchwall.

making the trench in soil

making the trench in murrum and had rock

Supplying and laying 75mm dia G.I pipe (B)GRADE

Supplying and laying 25mm dia G.I pipe (A)GRADE

Supplying, erecting heavy duty flange cable glanded2 to 4 core 2.50sq.mm/2 to 4 core 4 sq.mm

p point wiring for street light 3 core 1.5 sq.mm

Supplying & erecting water proof powder coated distrubution board 4 way 2x6 Amp. S P MCB

S&E with mains PVC unarmourde cable 3 core 2.5 sq.mm

Supplying and eracting and markiting MCB of doubled pole0 16 amp.

suppliying shockproof type hand lamp

supplying and ereating LED street light fitting suitable for 20to 25 w, including street light

supplying and ereating GI earth plate

S&E sheet metal one way enclouse for mcb

point wiring for light bells with 2- 1.5 sqmm PVC insulatted wire

point wiring for independent plug with 2-1.5 sqmm. PVC insulleted wire

point wiring with 2-1.5 sqmm. PVC insulleted wire

S&F CFL lamp 11W

supplying and ereating marine plywood 19mm

P & F MS boxes of 16 swg

supplying and ereating redy to use retrofit 18 LED 18-20 TUBELIGHT with poly caarbonate body, hat sink, integrated hf electronic driver complete and competiable to T8/T12 LED iluminate by

S & E ceiling fan 48" with step diamer

supplying and ereating four pole insulater only swith versin of MCB of 40 amp

S & E 40mm dia GI pipe 2.5M length of earth plate

P & F cover made of wire mesh jali

S & E ding dong type call beel

S & E 4"x4" epoxy coated 3 way jinction box

S & E steel tabular swaged pole 139.7x114.3x88.9 mm dia.

ROYALTY CHARGES

Royalty for Sand

Royalty for murum and Other material

QUALITY CONTROL & LAB TESTING

M20 CONCRETE: Concrete Mix Design (With all Tests on basic materials)

M20 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3

M25 CONCRETE: Concrete Mix Design (With all Tests on basic materials)

M25 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3

M10 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3 cubes).

BRICKS : Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks)

TMT STEEL : (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

Sand :- i) Fineness Modulus, II) Silt content

Murum :- ii) Atterberg Limit iii) Density of compacted layeriv) Proctor Test

Bitumen Penetration, Softening Point, Flash & Fire Point, Specific Gravity, Viscosity.

Crushing Value/Compressive Strength, Water Absorption & Specific Gravity,

Cement Test i) Comprecive strengh ii) Intital and final setting time iii)Spcific Gravity iv) Spicific Gravity v) soundness vi) Finess

METAL Gr I & Gr II Agrregates AIV Test, Gradation,Water Absorpation Test,Crushing Value

Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct

SRL CONSTRUCTION PVT LTD (BID ID -7069341)