Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC AT AMRITPUR PO INS CHILKA DIST KHURDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹14.1 L+₹27,974 (2.02%)Rejected-Finance AT BALANTAR POST PATHARA VIA KHALLIKOTE DIST GANJAM ORISSA 761029 | GANJAM | ODISHA | 761029 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹15.1 L+₹1.2 L (9.00%)Rejected-Finance AT DUNGAMAL NH 5 PO INS CHILKA VIA BALUGAON DIST KHORDHA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹15.4 L+₹1.5 L (10.9%)Rejected-Finance AT AMRITPUR PO NB CHILKA VIA BALUGAON DIST KHURDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹16.2 L+₹2.3 L (16.9%)Rejected-Finance AT AMRITPUR PO NB CHILKA VIA BALUGAON DIST KHURDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L5 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹28,000
Closing Date
18 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Chilka
Garrison Engineer Chilka PO INS Chilka Distt Khordha Odisha 752037
WELCOME MAINTENANCE TO OFFICERS ,SAILORS MD ACCN AND CIVILIAN OFFICERS AT INS CHILKA UNDER GE CHILKA
2022_MES_554546_1
GE/CHL/8829 OF 2022-23
Open Tender
Civil Works
Item Rate
300 days
Garrison Engineer Chilka
MES Enlisted Contractor of class E category a i
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer Chilka
₹28,000
Yes
8 Dec 2022
27 Sept 2022
25 Oct 2022
27 Sept 2022
18 Oct 2022
11 Oct 2022
27 Sept 2022 - 4 Oct 2022
Amount
M&L for preparation of old decorated plastered surface including brooming down or steel wire brushing scrapping down moulds, moss and efflorescent salts and greasy spots and applying one coat of white wash on walls complete all as specified and as directed.
M&L for preparation of old decorated plastered surface including brooming down or steel wire brushing scrapping down moulds, moss and efflorescent salts and greasy spots and applying one coat of white wash on ceiling complete all as specified and as directed.
M&L for preparing old decorated surfaces of walls, by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper of approved shade complete all as specified and as directed.
M&L applying one subsequent coat of oil emulsion distemper of approved shade complete all as specified and as directed.
M&L for preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved shade complete all as specified and as directed.
M&L for preparing old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved shade complete all as specified and as directed.
M&L for washing, cleaning the existing terrazzo cast in situ flooring in grouting with neat cement grout of cream consistency using same coloured cement as in original mix curing and grinding by machines with carborundum stones of 300 to 400 grit size, washing, cleaning and rubbing hard with felt and moistened with oxalic acid powder at the rate of 5 gm of oxalic acid powder per Sqm and subsequently washing, cleaning floor with dilute oxalic acid solution and dried and polishing with machine fitted with felt or hessian cloths till floor shines complete all as specified and as directed.
M&L French polishing on surfaces of any description ,width or girth including cleaning and preparing the surfaces including a coat of filler with one or more coat on old work complete all as specified and as directed.
S&F in repair chromium plated fancy type hand faucet with hose and hook for EWC including all necessary fittings complete all as specified and as directed. Make:-Prayag Cat Part No 452 or equivalent as approved.
S&F in repair 32 mm dia PVC waste pipe with cup head for wash hand basin complete all as specified and as directed.
S&F in repair plastic water closet seat cover for EWC seat white colour , closed pattern with flat bottom including chromium plated hinging device complete all as specified and as directed.
S&F in repair 100 mm dia grating doom of PTMT (minimum weight 25 grams) complete all as specified and as directed.
S&F in repair droplet (looking mirror) of size 600mmx450mm and fixed to walls with screws complete all as specified and as directed. Make:- Prayag Cat No BLM-01.
S&F in repair standard aluminium door seal with nylon brush at lower side(as per sample) to fit at the bottom of door shutter with screws complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, tube light fittings, bracket light fittings and ceilling rose, holders etc including making good the disturbed surface of walls, complete all as specified and as directed.
M&L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn through in including PVC casing & caping (ISI Marked) not less than 20mm wide with all accessories including 1.5 sqmm copper conductor FRLS cable for earth continuity conductor of green colour for one light point, fan point controlled by one 5/6 Amps one way switch, complete all as specified and as directed. Note:- Unserviceable hylem sheet and MS sunken boxes/PVC boxes will be replaced as per site requirement and same shall be measured and paid seperatly under relevant items.
All as per item No 17 above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.
All as per item No. 17 here-in-before but for 15/16Amp socket out let, independent with 2.5 sqmm copper cable of PVC FRLS insulated, unsheathed, multi stranded and 1.5 sqmm copper conductor cable FRLS as earth continuity conductor of green colour complete all as specified and as directed.
S&F switch paino, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.
S&F bell push, flush type, 5 Amp, 230Volt, complete all as specified and as directed.
S&F bell electric, AC 230 volts complete all as specified and as directed.
S&F ceiling rose, surface Bakelite 65 x 30mm, three terminals, complete all as specified and as directed.
S&F switch socket combination 2 pin & 3 pin 5 Amp, 230 volt, multipurpose, complete all as specified and as directed.
S&F switch socket combination 5 in 1 type, 3 pin 5 / 15 Amp, 230 volt, multipurpose, complete all as specified and as directed.
S&F Five stepped type electronic fan regulator for ceiling fan of any sweep including necessary connection complete all as specified and as directed.
S&F in repair factory made sheet metal enclosure with protected type 2 pin earth plug and socket with one MCB SPN 240 volt, 20 Amps complete all as specified and as directed.
S&F in repair 9 Watt tube light fitting with lamp, Endura linear LED, wall mounted batten with polycarbonate housing and intigrated driver for efficient heat dissipation having THD<20% with complete including connection with two core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make:- Havells Cat part No LUMILINEBS9WLED865SPCWH or Bajaj Cat part No BCLSB 10WH as approved.
S&F in repair 10 Watt LED Bulk Head fitting Environmenatal friendly, ultra morden, energy saving, surface mounted, decorative oval bulk head edge- lit LED luminaries comprising of high brightness LEDs complete all as specified and as directed. Make:- Bajaj Cat No BIBWP10WLED (Product code 112334) or Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Philips Cat Part No. WT202WLED6SCWPSUSIPC as approved.
S&F in repair 18 Watt T-8 LED retrofit tubelight to existing fitting complete all as specified and as directed. Make :- Havells Cat part No PHOTONULTRA 1213T8SSTL18WLED865SPC (LED Lamp) or Bajaj Cat Part No BLRB18W CW or Wipro Cat part No : LL13-181-65SE(LED Lamp) or Eveready Cat part No 20W T8 65K LED Tubelight as approved.
S&F in repair 20 W tubelight fitting with lamp, Endura linear LED ,Wall mounted LED batten with polycarbonate housing & intergated driver for efficient heat dissipation having THD>20% with complete fitting complete all as specified and as directed. Make:- Havells Cat part No LUMILINEBS20W LED865SPCWH or Bajaj Cat part No. BCLSB 20 WH as approved.
S&F in repair Factory made sheet metal enclosure for DBs double door (fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells
S&F in repair Factory made sheet metal enclosure for DBs double door (fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells
S&F in repair of Factory made sheet metal enclosure for DBs double door (fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 6.0 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.
S&F in repair MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed.
S&F in repair MCB 32 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed.
S&F in repair MCB 63 Amp, 415 Volt, TPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed.
Taking down and re-fixing of existing hanging conduit wiring with proper saddles, complete all as specified and as directed.
S&F 3mm thick laminated sheet (ISI Marked) of size 9 inch X11 inch with 4 Nos of screws and washers complete all as specified and as directed.
S&F 3mm thick laminated sheet (ISI Marked) of size 5 inch X7 inch with 4 Nos of screws and washers complete all as specified and as directed.
S&F 3mm thick laminated sheet (ISI Marked) of size 5 inch X5 inch with 4 Nos of screws and washers complete all as specified and as directed.
S&F sub main wiring with two runs of 4.0 sqmm PVC FRLS sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4 sqmm FRLS drawn through surface PVC casing capping not less than 20 mm wide complete all as specified and as directed. Note:- 2 run of 4 sqmm copper cable, one run of 4 sqmm copper earth wire and 01 run of PVC Casing capping shall be measured as one unit length.
S&F sub main wiring with two runs of 6.0 sqmm PVC FRLS sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6 sqmm FRLS drawn through surface PVC casing capping not less than 20 mm wide complete all as specified and as directed. Note:- 2 run of 6 sqmm copper cable, one run of 6 sqmm copper earth wire and 01 run of PVC Casing capping shall be measured as one unit length.
S&F sub main wiring with four runs of 6.0 sqmm PVC FRLS sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6 sqmm FRLS drawn through and including PVC casing and caping not less than 32 mm wide complete all as specified and as directed. Note:- 4 run of 6 sqmm copper cable and one run of 6 sqmm copper earth wire and 01 run of PVC casing caping shall be measured as one unit length.
Taking down existing lamp fitting of any type and refixing the same including provision for copper cable of suitable size from celling rose to fitting, complete all as specified and as directed.
S&F in replacement of LED building security light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 complete all as specified and as directed . Make :- Bajaj Cat Part No.ENXT P 30L WH CR PC SD 25 W or Havells Cat Part No : VILUMINASL25WLED757SASYB as approved.
S&F in repair switch paino, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.
S&F in repair ceiling rose, surface Bakelite 65 x 30mm, three terminals, complete all as specified and as directed.
S&F in repair of bell push, 5 Amp, 230Volt, complete all as specified and as directed.
S&F in repair bell electric, AC, 230 volts, complete all as specified and as directed.
S&F in repair Five stepped type electronic fan regulator for ceiling fan of any sweep including connection with three core flexible PVC copper conductor of size 1.5 sqmm, complete all as specified and as directed.
S&F in replacement switch socket combination 2 pin & 3 pin 5 Amp, 230 volt, multipurpose with two screw to fix on board, complete all as specified and as directed.
S&F in repair switch socket combination 5 in 1 type, 3 pin 5 / 16 amp, 230 volt, multipurpose with four screw to fix on board complete all as specified and as directed.
S&F round dummy plate for electric wiring junctions, complete all as specified and as directed.
S&F PVC rectangular block for mounting, switches, sockets, fan regurators etc with box of size 100mm x 100mm x 50mm, complete all as specified and as directed.
S&F PVC rectangular block for mounting, switches, sockets, fan regurators etc with box of size 175mm x 100mm x 50mm complete all as specified and as directed.
S&F in repair of LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09/10W complete all as specified and as directed. Make:- Bajaj/Havells/Surya
S&F in repair angle holder for LED bulb of any type complete all as specified and as directed.
Taking down existing un-serviceable sub main wiring of any type and size upto 6 sqmm including making good the disturbed surface and matching the colour of wall with the existing colour complete all as specified and as directed.
Taking down ceiling fan of any sweep of any make by disconnecting electric connection from ceiling rose, for carrying out necessary repair such as replacement of old condensers/ rubber bushes/ bearing/ flexible copper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts, rewinding of burnt coil and replacement of suitable size of cotter/split pin as required,reassembling and re-fixing in original/ new position including necessary connection with three core flexible copper wire of suitable length from ceiling rose to connector of fan and testing complete all as specified and as directed. Notes :- (i) Rewinding of fans and spares required for replacement shall be measured and paid seperately under respective item of BOQ as considered therein. (ii) Rate quoted is deemed to be inclusive of new flexible copper wire of suitable size as required at site.
Taking down exhaust fan/wall mounting fan heavy duty of 300 mm or 380 mm or 450 mm sweep by disconnecting from the ceiling rose, carrying out necessay repair such as replacement of capacitor/ bearings/ flexible copper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts, rewinding of burnt coil and replacement of suitable size split pin as required, reassembling and re-fixing in original position, fixing of louvers/wire mesh including necessary connection with three core flexible copper wire and testing complete all as specified and as directed Notes :- (i) Rewinding of exhaust fans and spares required for replacement shall be measured and paid seperately underrespective item of BOQ as considered therein. (ii) Rate quoted is deemed to be inclusive of new flexible copper wire of suitable size as required at site.
S&F in repair of capacitor/ condenser of ceiling fan , 2.5 mfd of approved make complete all as specified and as directed. Make :- Nicco/Havells/Universal as approved.
S&F in replacement of capacitor /condenser of exhaust fan 4 mfd of approved make complete all as specified and as directed. Make :- Nicco/Havells/Universal as approved.
M&L for anodised aluminium flat iron of size 25x3mm for fixing of mesh and the like etc including taking down the existing unserviceable flat iron complete all as specified and as directed.
S&F in repair of stainless steel wire cloth, 0.36mm dia of wire and average width of aperture 1.40mm and fixed complete all as specified and as directed.
M&L for rewinding of ceiling fan motor of 1200 mm sweep of any make with super enameled copper wire of existing gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts and washers, split pins etc complete all as specified and as directed
M&L for rewinding of Exhaust fan motor of 300 mm sweep of any make with super enaneled copper wire of existing gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with varnish , greasing the bearing, replacement of missing/worn out nuts, bolts and washers, split pins etc complete all as specified and as directed.
M&L for spray painting with white synthetic enamel paint including preparation of old surface of the ceiling fan of any make/model/sweep, filling cavities with filler after cleaning dust complete all as specified and as directed. Make :- Berger paint(Luxol)/Asian paint (Apcolite) / Jenson & Nicholson paint Ltd(Brolac)
All as per item No 68 above but for exhaust fan of 300 mm sweep of any make and model with grey colour synthetic enamel paint complete all as specified and as directed.
S&F in repair of ball bearing 6201 / 6202 / 6203 including metal filling, machining if required complete all as specified and as directed. Make :- SKF/NBC as approved
S&F in repair of canopy (upper and lower) to match the ceiling fan of existing make/model as required at site complete all as specified and as directed
S&F in replacement of gun metal bush, suitable for ceiling fan of any make and sweep complete all as specified and as directed.
S&F in repair of clamp with nuts , bolts and rubber bush suitable for ceiling fan of any sweep and make as per existing size and shape complete all as specified and as directed
S&F in repair 15mm bore galvanised iron pipe medium grade as in down rod , 300mm long with nuts, bolts , washers and suitable pin for hanging of ceiling fan of any sweep and make complete all as specified and as directed. Make of GI pipe:- Tata/Jindal/Prakash Surya
S&F in repair 15mm bore galvanised iron pipe medium grade as in down rod, 600mm long with nuts, bolts, washer and suitable pin for hanging of ceiling fan of any sweep and make complete all as specified and as directed. Make of GI pipe:- Tata/Jindal/Prakash Surya
S&F in repair shaft suitable for 1200/1400 mm sweep ceiling fan complete all as specified and as directed.
Taking down the storage type water heater of any type & size by disconnecting electric connection for carrying out necessary repair such as cleaning of inner water tank, removing scales,connecting flexible three core copper cable of size 2.5 sqmm and re-fixing in original position including testing complete all as specified and as directed. Notes :- Spares parts required for repalcement shall be measured and paid seperately under respective item of BOQ as considered therein.
M&L for spray painting with white synthetic enamel paint including preparation of old surface of geyser of any make/model complete all as specified and as directed.
S&F in repair DP switch , 32 Amps, 230 volts with indicating lamp complete all as specified and as directed. Make :- Legrand / Anchor/ Cona / Plaza/ Bajaj
S&F in repair indicating lamp for geyser, complete all as specified and as directed
S&F in repair 3 pin plug top of 15 Amp, complete all as specified and as directed. Make:- Legrand / Anchor / Cona / Plaza /Bajaj
S&F in replacement heating element 2000 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 50 litre capacity complete all as specified and as directed.
S&F in repair heating element 1500 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 25 litre capacity complete all as specified and as directed.
S&F in repair 15 Amp switch complete all as specified and as directed.
S&F in repair geyser tank suitable for existing water heater of 25 litre capacity complete all as specified and as directed.
S&F in repair geyser tank suitable for existing water heater of 50 litre capacity complete all as specified and as directed.
S&F in repair 15mm dia PVC flexible connections (heavy duty) 450mm long with two Nos brass nuts with washer at both ends complete all as specified and as directed Make :- Prayg / Commandar / Prince/Polytuff
S&F in repair 15mm dia bore galvanised iron pipe medium grade with all fittings such as bends, elbow,tees,reducer, diminishing piece, caps, plugs and unions etc. complete all as specified and as directed. Make:- Tata/Prakash Surya/Jindal
S&F in repair 15mm dia bore stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair of thermostat of capacity 1500/2000Watt for geyser of any capacity complete all as specified and as directed.
ABHIMANYU MAHARANA
RCB CONSTRUCTION
D RAVICHANDRAN
PRADIPTA KUMAR PANI
HARI HARA NAYAK
M/S S R Saha And Co
UDAYA BHANU NAYAK
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .