Urgent SITC of compound light

Amount

COMPOUND LIGHTING: Supply & Delivery of Hot Dip Galvanised (as per IS:2629 / IS 2633 / IS 4759 and with its latest amendment ) Octagonal Pole made of HT steel ( sheet thickness -3mm ) conforming to grade S355 of BSEN 10025 along with welded base plate of required size conforming to IS: 226 / 2062 with integrated Control box with required sizes studs for termination of 2 core 10 /4 Core 16 sq mm Al (Armoured ) cable incld S&F 1 No 6 Amp SP MCB ( C-Series ) for each out going circuit to the fittings with proper pad locking arrangement for the following pole -- 7 Mtr Long [ Top Dia ( A / F ) - 70 mm, Bottom Dia ( A / F ) -130 mm] Base Plate Size : 200 mm x 200mm x 12 mm.(Make: Utkarsh/Bajaj/Transrail/ Bansal ).

Errection of the following Octagonal pole by designing and Casting RCC ( M 20 ) foundation of suitable size as specified below considering the safe soil bearing capacity at site as T/sq m, including excavation of earth, providing, cutting, bending and placing in position reinforcement as per drawing and providing pipe for cable entry and exit as required and providing and fixing of 4 Nos foundation bolts ( J Type ) as specified below and as per drawing on ground surface including back filling and cleaning extra earth -7 Mtr Long [ Founation size - 500 mm X 500 mm X 1200 mm, J Bolt Size - 4 M 20 X 600 ]

SITC of single dip galvanized steel overhang bracket ( Swan Neck Type/As per direction of the EIC ) at the top of the pole having 1.5 M length complete with all fixing arrangements as required including painting. Single Arm

Supply & Delivery of 1.1 kv grade XLPE-armoured AL. cable, as directed by EIC.[Make - Polycab/ Havells/ Gloster] 2Cx10 sqmm

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.F-2, Item No. 1. / (a)

S&F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of following XLPE/PVC armoured cable, as per GS. 2Cx10 sqmm

Finishing the end of following XLPE/PVC armoured cable by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials, as per GS. 2Cx10 sqmm

SITC of road lighting luminaire 250V,70W (Maximum) ( IP 65 ) with peanut lens and high power LED and to ensure uniform distribution, higher spacing between poles and maintenance free system and system lumen output will be minimum 10500 lumen suitable for use with 230Volt 50Hz AC supply etc as required. as directed by EIC.[Make: Philips BRP502 LED105CW/ Havells/equivalent spec of Crompton]

Wiring by 3x 1.5 sqmm single core PVC insulated copper wire through polythene pipe from loop box to fitting as per GS.[Make- Havells/ Polycab/ Gloster ]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint, as per GS.

The rates should be quoted inclusive of all taxes and duties .

M/S. M. R. ENTERPRISE (BID ID -6342328)

M/S Basak Electrical Repairing House (BID ID -6349231)