Certain repair to footpath ,area drainage ,fencing and boundra wall,garbage bin at mil stn fazilka

Amount

Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.all as specified

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified.

M&L for preparation of new plastered or unplastered surface of walls and applying two coats of cement based paint complete all as specified

M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.

M&L for applying one coat of synthetic enamel paint on old decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed by Engineer - in - Charge .

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 all as specified.

M&L Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 all as specified.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified & directed by Engineer-in- charge.

M&L brick work with sub class' B' bricks(except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified & directed by Engineer-in- charge.

Demolation of Trellis work (Jafri)/ RCC Jallies, including taking as under of battens in trellis in one way complete all as specified & directed by Engineer-in- charge.

M&L 35 mm thick precast Cement concrete 1:2:4, type B-0, louvres and jallies set in cement mortar 1:4 including all mould frame complete all as specified & directed by Engineer-in-charge

M&L 25 mm thick precast Cement concrete 1:2:4, type B-0, louvres and jallies set in cement mortar 1:6 including all mould frame complete all as specified & directed by Engineer-in-charge

S & F Mild steel bars 6mm dia to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specifi and directed by Eng-In-charge.

M&L Precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab,drain cover ,chajjas etc.and similar articles with plain faces set in CM 1:6 complete all as specified and directed by Engineer - in - Charge .

M&L for PCC 1:2:4 type B 2, using 40 mm graded stone aggregate as surface channels and drains incl use of necessary form work all as specified and directed by Engineer - in - Charge .

Excavtion in trenches n exc 1.50 m wide and n exc 1.50 mtr in depth for foundation etc getting out in soft/loose soil complete all as specified and directed by Engineer - in - Charge .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer - in - Charge .

Removing excavated material ( soils ) n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer - in - Charge .

M & L PCC (1:4:8) using 40mm graded stone aggregate as in foundation filling & mass concrete complete all as specified & directed by Engineer-in-charge.

Running welding in repairs n. exc 6mm thick of metal complete all as specified and directed by Engineer - in - Charge .

Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer - in - Charge .

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer - in - Charge .

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured).

Supply only 10 mm MS round bars as in line wires complete all as specified and directed by Engineer - in - Charge .

Dismantling of chain link fencing fixed in any position complete all as specified & directed by Engineer-in- charge.

Dismantling of barbed wire fixed in any position complete all as specified & directed by Engineer-in- charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion(Posts embedded in Concrete, brick work,masonry, etc).and making good disturbed ground of any description. Complete all as specified and as directed by the Engineer-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil including spreading surplus soil, watering, and removing surplus soil to a distance n exc 50m and making good surface Complete all as specified and as directed by the Engineer-in-charge.

S&F Posts and struts in fencing including cutting tops to shape as directed,drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to FE-290 Gde E-165 complete all as specified and directed by Engineer - in - Charge .

Suply only galvanised chain link fencing of 3.25 mm dia mild steel wire , diagonal size 100x100 mm mess including line wire , straining bolt etc and fixing to any type of standarard line wire including securing etc complete ( Note : Line wire 10 mm dia measured and paid separately.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified & directed by Engineer-in- charge.

S&F mild steel bolts 12mm dia , screwed one end & with hexagonal or square nuts n. exc 150mm long complete all as specified and directed by Engineer - in - Charge .

M&L Preparation of new painted steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting of approved shade over one coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfaces Complete all as specified and as directed by the Engineer-in-charge.

M & L for preparation of old painted steel surfaces of any description over 10 cm width of girth not otherwise described and applying one coat of synthetic enamel paint all as specified & directed by Engineer -in-charge.

M & L for preparation of old painted brick stone , concrete , plaster surface of any description over 10 cm width of girth not otherwise described and applying one coat of synthetic enamel paint all as specified & directed by Engineer -in-charge.

Disconnecting existing tank setting aside or lowering if required for repairs, cleaning etc and hoisting if required reconnecting and refixing in position with all fitting (cleaning measured separately), exc 250 Ltrs and n.exc. 500 Ltrs capacity.

Disconnecting existing tank setting aside or lowering if required for repairs, cleaning etc and hoisting if required reconnecting and refixing in position with all fittings (cleaning measured separately), exc 500 Ltrs and n.exc.1000 Ltrs capacity.

Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of tank and capacity of tank exc. 250 Ltrs and n. exc. 500 Ltrs.

Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of tank and capacity of tank exc. 500 Ltrs and n. exc. 1000 Ltrs.

Demolation of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided.

M&L PCC 1:4:8 type D 2 using 40 mm graded stone aggregate as in sub base.

S&F Machine pressed precast concrete interlocking paver block with grey cement & pigment, any shape and size confirming to IS 15658-2006 of 80mm thick M-40 grade including and over 25mm thick sand cushion.

M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs stone or mud stops, rounded or chamfered on edges and similar work all as specified and as directed.

M&L Chequered cement concrete tiles 20cm x20cm x 25mm thick, with grey pigment cement and pigments, set, jointed and pointed in neat cement slurry in floors all as specified.

MANCHANDA CONSTRUCTION CO

KATARIA CONSTRUCTION