Estimate for Installation of Gates and Gearing system (Electrically Operated) of Abandoned Bikaner Canal at Ballewala Head

Amount

Providing & fixing in position of Flat/Wedge Seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 12 mm th.)

Providing & fixing in position of Top and Side Seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(100/44)

Supply, Providing and fixing of Stainless steel Bolts & Nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

Supply, Providing and fixing of Galvanized Bolts & Nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

C.I Housing cover with worm and worm wheel assembly, shaft, handle, Gun metal bush with triple start threading inside for spindle complete including labour charges.

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 65mm dia(Up to 2.5 tonne Capacity)

Supply and fixing of Spindle Cover

Supply and fixing of Common Shaft duly machined at site complete in all respects and to entire satisfaction of engineer in charge

Providing and Fixing of Coupling for Common Shaft complete in all respect and to entire satisfaction of Engineer In charge.

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Providing & Fixing Clamp Plate, complete in all respects

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Providing and Fixing Skin Plate 10mm

Supply of multi purpose Synthetic hetiv grease

Supply of Mobil Oil

Providing and fixing horizontal & vertical stiffner, Hook Plate, stiffner Angle, Gate wheel Cover Plate, square bar on Gates and Deck structure.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge

Providing and Fixing Fischer Bolts (Size 16x300mm )

Providing and Fixing Stainless Steel Flat

Providing and Fixing of Gate wheel assembly complete in all respects and to entire satisfaction of Engineer in-charge. 120mm dia

Providing Gun Metal Bush Assembly complete in all respects and to entire satisfaction of Engineer in-charge.

Assembling and Fixing Gun Metal Bush Assembly complete in all respects and to entire satisfaction of Engineer in-charge.

Providing of roller/ hook pin in position complete in all respects and to entire satisfaction of Engineer in-charge. (upto 75 mm /above 75 mm)

Providing and Fixing J Anchor Bolt OD 16 x 360 Length

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of engineer incharge (6mm)

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. (CSR item no. 9.2)

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth (CSR item no. 10.16)

Cold twisted deformed (ribbed/ tor steel) Bars (Fe 500 grade as per IS 1786-1985) for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete. (CSR item no. 18.18)

12.5 mm thick cement plaster 1:5. (CSR item no. 15.10)

Finishing walls with water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade (CSR item no. 16.13)

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Steel forging as per specification & grade of 40mm Dia complete in all respect(EN-8)

Machining and finishing of solid shaft 40mm Dia to desire shape & size,complete in all respect

Providing and fixing Flexible Coupling (40mm)

Providing and Fixing Flange Coupling (40mm)

Providing and Fixing in Position 0.75Kw 4Pole Motor including EM -Brake integral with Gear box assembly foot mounted with output torque 109Nm at 64RPM at Gear Box output shaft-

Supply and Installation of Variable Frequency Drive - 5HP for 220.2.2 upto 3HP Motor

Providing and Fixing Motor Control Panel at site complete in all respects

Providing and Fixing Dog Clutch assembly

Bevel Gear with Ratio 1:1 having two Co-axial outputs and single input

Providing L.E.D light of standard reputed company with minimum 2 year warranty:100W

LT Panel enclosure having space for 1No.Incomer MCCB 250Amp. and 6Nos.outgoing MCCB's 40amp. to 125amp.according to the requirement at site(Approx. size 1300 x 1650 x 400mm)

Overall size 70sq.mm (3½ Core) Armoured(Loose). Main Supply from Transformer to LT Panel

Overall size 25sq.mm (4Core) Armoured(Loose). From LT Panel to Control Panel

PVC Flexible Pipe 40mm dia.

Bus Bar Chamber 63amp., 415volts OverallDimensions (300mm x 345mm x 120mm)nominal

Aluminium thimble cable Core size 10 - 16sq.mm

Copper thimble cable Core size 4 - 6sq.mm

Overall size 1sq.mm (Un-sheathed)

Overall size 4.0sq.mm (84/0.3mm), 3Core

Overall size 6.0sq.mm (56/0.3mm), 3Core

Making dewatering arrangement by pumping set 4'' *4'' (Tractor driven)

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads

Rehandling of Earthwork with average lead 15 mtr complete in all respect , as per instructions of engineer in charge . Note: The work may be executed manually or by machinery

Any Other Item

OASIS CONTRACTORS AND CONSULTANTS PVT LTD