REPAIR RECTIFICATION OF DAY TO DAY COMPLAINTS OF EXTERNAL ELECTRIFICATION SUPPLY SYSTEM INCLUDING REPAIRS TO EXTRNAL ELECTRIC SUPPLY REPAIRS TO APFC, LT PANELS BOARDS AND CONNECTED MISC WORKS IN ZONE II C UNDER AGE EM NO-II OF GE UTILITY SECUNDERABA

Amount

Supply and fixing steel light bracket made out of 40 mm bore mild steel GI light grade tubing over all length 1.5 mtr bend to shape as directed including providing two Nos MS flat iron 40x6 mm clamp of appropriate size with nut bolts and washer duly painted with two coat of synthetic enamel paint over a coat of primer (GI surface shall not be painted) complete all as specified.

Taking down LED street light fitting/ LED flood light fitting of any watts and type from any height of pole/walls/any location and detecting the fault in the fitting by checking the accessories, wiring and refixing the same after repairs complete all as directed by Engineer-in-Charge. Note : Spares like driver and other accessories etc will be measured and paid separately under relevant items

S&F LED Driver suitable for upto 45 watts LED light fittings complete all as specified and directed.

S&F LED Driver suitable for from 60watts to 90 watts LED light fittings complete all as specified and directed.

S&F LED Driver suitable for from 100watts to 150 watts LED light fittings complete all as specified and directed.

S&F LED Driver suitable for from 200watts watts LED light fittings complete all as specified and directed. Note for item No.03 to 6: (i) Drivers shall be techincally compitable for existing fittings & frame size shall be matched to existing fittings. (ii) Make :Havells/Philips/Bajaj/Wipro/Luker.

S&F PVC insulated,unarmoured 3 core 2.5Sqmm Aluminum cable including making neccessary cable terminations,lugs,glans complete all as directed by Engr - in-Charge

Cutting and trimming trees branches any girth and any size touching to overhead lines and cleaning the distance 1.5 mtr length both side of OH line with in a span of 35 mtrs(appx) each disposing the same, clearing the site all as directed by Engineer-in-Charge.

S&F in replacement of Line Voltage Monitors (LVMS) of existing make to capacity of 100 KVA to 625 KVA capacity listed parameters including testing complete all as specified and as directed.

Cutting anxious green growth / vegitation growth for cleaning out the area around transformer installations and four pole structure yards at ground level by cutting out roots, un wanted plants bushes and removel of the same by surface excavation not exceeding 30 cm deep average 15 cm complete

S&F battery brass terminal and jelly complete all as specified and directed.

Disconnecting & taking out unserviceable MCCB and Supply, test, install & commissioning of new MCCB 3 pole, 250Amps, 25kA,with both side spreader link, 415volts,50 Hz, with adjustable settings, suitable for exisitng panel (frame size shall be matched with existing one) of the capacities for fixing in panel board /sheet metal enclosures/distribution boards with necessary cable connections,suitablel lugs, glands, nuts, bolts and screws complete all as specified and directed. Make:- Havells/L&T/Standard/HPL.

Disconnecting & taking out unserviceable MCCB and Supply, test, install & commissioning of new MCCB 3 pole, 250Amps, 35/36kA,with both side spreader link , 415volts,50 Hz, with adjustable settings, suitable for exisitng panel(frame size shall be matched with existing one) of the capacities for fixing in panel board/sheet metal enclosures/distribution boards with necessary cable connections, suitable lugs, glands, nuts, bolts and screws complete all as specified and directed. Make:- Havells/L&T/Standard/HPL.

Disconnecting & taking out unserviceable MCCB and Supply, test, install & commissioning of new MCCB 3 pole, 315 Amps to 400Amps, 50kA, with both side spreader link,415volts,50 Hz with adjustable settings & thermal, magnetic realse,suitable for exisitng panel(frame size shall be matched with existing one) of the capacities for fixing in panel board/sheet metal enclosures / distribution boards with necessary cable connections, suitablle lugs, glands, nuts, bolts and screws complete all as specified and directed. Make:- Havells/L&T/Standard/HPL..

Disconnecting & taking out unserviceable MCCB and Supply, test, install & commissioning of new MCCB 3 pole, 630Amps, 50kA, 415volts,50 Hz with adjustable settings & thermal,magnetic realse,suitable for exisitng panel(frame size shall be matched with existing one) of the capacities for fixing in panel board/sheet metal enclosures/distribution boards with necessary cable connections,suitable lugs, glands,nuts,bolts and screws complete all as specified and directed. Make:- Havells/L&T/Standard/HPL.

Supply&Fixing APFC relay 8 stages in existing panel including including necessary wiring & misc accessroies, programming testing for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. Make:HPL/L&T/Schnieder

Supply&Fixing of 3 pole MCB,63amps,C-curve,10kA, 50Hz,with both side spreader link, 440v in existing panel including necessary wiring & misc accessroies for satisfactory completion of job and taking down old unserviceable one complete all as directed by Engineer-in-Charge. Make:L&T/Schnieder/Seimens

Supply&Fixing of 200/5 Amps Current transformers -03Nos(in three phases) including necessary wiring & misc accessroies for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge.

M&L on load change over switch 630 Amps capacity suitable for 3 phase, 4 pole, 415 Volts,font handle operated suitable in open execution type for fixing in existing panels including necessary lugs,glands.,nuts,bolts inclduing taking down old unserviceable one complete all as specified and directed Make:- Havells/L&T//HPL. Note for item no.11 to 23: (i)The above item shall be executed immediately as and when required basis.

M&L on load change over switch 400 Amps capacity suitable for 3 phase, 4 pole, 415 Volts,font handle operated suitable in open execution type for fixing in existing panels including necessary lugs,glands.,nuts,bolts inclduing taking down old unserviceable one complete all as specified and directed Make:- Havells/L&T/Standard/HPL

M&L on load change over switch 320 Amps capacity suitable for 3 phase, 4 pole, 415 Volts,font handle operated suitable in open execution type for fixing in existing panels including necessary lugs,glands.,nuts,bolts inclduing taking down old unserviceable one complete all as specified and directed Make:- Havells/L&T/Standard/HPL

M&L on load change over switch 200 Amps capacity suitable for 3 phase, 4 pole, 415 Volts,font handle operated suitable in open execution type for fixing in existing panels including necessary lugs,glands.,nuts,bolts inclduing taking down old unserviceable one complete all as specified and directed Make:- Havells/L&T/Standard/HPL

M&L Off load change over switch 200 Amps capacity suitable for 3 phase, 4 pole, 415 Volts,side handle operated with sheet metal enclosure suitable for fixing in existing panels including necessary lugs,glands.,nuts,bolts inclduing taking down old unserviceable one complete all as specified and directed Make:- Havells/L&T/Standard/HPL

M&L Off load change over switch 400 Amps capacity suitable for 3 phase, 4 pole, 415 Volts,side handle operated with sheet metal enclosure suitable for fixing in existing panels including necessary lugs,glands.,nuts,bolts inclduing taking down old unserviceable one complete all as specified and directed Make:- Havells/L&T/Standard/HPL

S&F ACSR jumper in HT/LT over head line as that of existing size including binding wire, nuts, bolts & washers including taking down existing unserviceable/burnt out jumper complete all as directed by Engr-in-Charge. Note: The above item shall be executed immediately as and when required basis.

M&L for advance maintenance free G.I. SAFE EARTHING electrode with PIPE of not less than 50 mm outer dia (THICKNESS NOT LESS THAN -2.5MM) and two meter length, the electrode should be of galvanised (80 -100 micron) along with earth lead as galvanised steel strip of size 32X6 mm, 7.5 m . The GI Electrode shall be pre-filled with Cristalline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg Back fill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-friendly and having RoHs certification. GI Electrode Shall be tested from CPRI. The earthing pit should be cover with PCC (1:2:4 , type B-1) cover, of size 450 x 450 mm complete all as specified and directed. Make - ASHLOK / INDELEC/ JMV / TERCEL. Note :- The quotaed rate is deemed to be included boring in any type of soil removal of surplus soil from site and necessary connection to existing susyem with 32 x 6 mm GI strip of length upto 7.5 M.

Supply and connect LT 1100 V outdoor type cable end termination heat shrinkable joint kit suitable for the size 3.5 core x 25/35 sqmm. with necessary jointing materials complete all as directed by Engr-in-charge. Make :- M-SEAL/ DENSON/3-M/ RAYCHEM

All as per Item No.27 above but for the size 3.5 core x 70/95 sqmm.

All as per Item No.27 above but for the size 3.5 core x 120/150 sqmm.

All as per Item No.27 above but for the size 3.5 core x 185/240 sqmm.

All as per Item No.27 above but for the size 3.5 core x 300/400Sqmm

Supply and connect LT 1100 V outdoor type cable straight through heat shrinkable epoxy joint kit suitable for the size 3.5 core x 25/35 sqmm. with necessary jointing materials complete all as directed by Engr-in-charge. Make :- M-SEAL/ DENSON/3-M/ RAYCHEM

All as per Item No.32 above but for the size 3.5 core x 70/95 sqmm.

All as per Item No.32 above but for the size 3.5 core x 120/150 sqmm.

All as per Item No.32 above but for the size 3.5 core x 185/240 sqmm.

All as per Item No.32 above but for the size 3.5 core x 300/400Sqmm

Isolate, disconnect, dismantle the burnt out lugs from main switches/MCCB/ACB/Breakers and Supply &fix new lugs with crimping tool as per existing one including fixing, insulation, termination tomain switches/MCCB/ACB/Breakers for the following sizes of cables complete all as directed by Engr -In-Charge. Note : cleaning the cable termination ends insulation as required length and fixing new lugs as per size including well crimping to the lugs for both ends of cable complete are included in quoted rates.

25 sqmm to 50 sqmm

70 sqmm to 95 sqmm

120 sqm to 240 sqmm

300 sqmm to 400 sqmm

up to 16 Sqmm

Meggering of HT Overhead conductor between Span to Span/Six pole structure/four pole structure, any type insulator with complete diconnection & reconnection of jumper for checking of fault and rectification for any size any place after disconnection of AB switch complete.

Supply, laying, testing & commissioning of XLPE insulated, armoured (heavy duty) electric cable with aluminium stranded conductor, 1100 volts grade, laid in trenches / duct/ fixed to wall with suitable size clamps / passing through pipe/Tunnel/under ground/surface up to the termination point(as directed by Engr-in-Charge) with necessary end terminations with suitable size cable lugs, cable glands, fixing of lugs with crimping with tool, nuts, boltsetc of the following sizes and including taking out unserviceable burnt out cable from its existing location complete for following sizes all as specified and directed..Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item) (b) Retrived serviceable bricks/ PCC cover shall be reused under relevent item)

2 Core x 6 Sqmm

2 Core x 10 Sqmm

4 Core X 10 Sqmm

4 core x 16Sqmm

4 core x 25Sqmm

3.5 core x 35Sqmm

3.5 core x 50Sqmm

3.5 core x 70Sqmm

3.5 core x 95Sqmm

3.5 Core X 185 Sqmm

3.5 Core X 240 Sqmm

Taking out and Relaying of LT cable of size10 sq mm to 50 Sqmm 2/3.5/4 core after carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugs all as specified and directed by ingr in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item) (b) Retrived serviceable bricks/ PCC cover shall be reused under relevent item)

Taking out and Relaying of LT cable of size70 sq mm to 300 Sqmm 3.5 core after carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugs all as specified and directed by ingr in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item) (b) Retrived serviceable bricks/ PCC cover shall be reused under relevent item)

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundation, laying of poles in trenches and getting out in hard /dense soil complete all as specified and as directed Engineer-in-Charge.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as directed by Engineer-in-Charge.

Removal of surplus soil to a distance no exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtrs above from the starting point complete all as directed by Engineer-in-charge.

Supply and spread approved dry river sand for foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as directed by Engr-in-Charge Note:- Punned thickness will be measured for payment purpose

M&L brick protection with common burnt brick sub class ‘B’ of size 230x115x75mm for cable protection complete all as directed by Engr-in-charge.

Supplying and laying reinforced precast concrete cable cover class LV , Type 1 flat with size 250mm x150 mm x 40mm all asspecified and directed by Engr-in-Charge.

M & L Galvanised iron tubing 100 mm dia light grade laind in trenches/floors/walls/under ground for eath lead protection and cables at road crossing etc complete all as specified and directed.

Relaying of serviceable bricks / pcc cover of any size retrived during taking out of cable complete all as directed

M & L cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including excavation for laying of cable pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed.

Supply,install , testing & commsissioning of Bus bar chambers(including 4 bus bars i.e R,Y,B and neutral),3-Ph with netral,1100volts,50Hz including suitable sheet metal enclosure along with necessary screws,nuts,bolts and other Misc accessroies and making connections(input &out put) with cable terminal ends complete for the following current carrying capacities

4-Way, 100 Amps

4-Way, 250Amps

4-Way, 400Amps Make fore item Nos 51.01 to 51.03 Havells/L&T/Standard

Design, fabrication, supply and errecting connecting and testing totally enclosed LT Cubical panel board of size not less than 2500x1875x500mm, 3 Phase 4 wire system indoor type 2.00mm ,double door front and back openeing type sloped canopy(Hood) on top extended all-around, separate compartment for each control gear, cable alley,busbar chamber,cable entry, provision of knock out type plates(gland plate) for various sizes of cable up to 400 Sqmm 3.5 Core in and out(Quantity of konck out type plates shall be double for incoming & out going cable entries, panel board shall have sufficent space to accommodate spare cables also) , incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out of 2.00mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structral RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on suitable size angle iron frame thick duly painted and embeded in PCC 1:2:4 type C1, 45cm below ground level and 30cm above ground level including taking down old unserviceable at MH and comprising of the following:-

(A)Incoming:- (a) MCCB 630Amps Four Pole AC 415 Volts,50Hz,50kA , Adjustable Thermal & Magnetic settings-03Nos free for fixing only. (b) Rotary operating mechanisim-03 No, Make: L&T Cate No.CM99861OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (c) Spreader links -03 Sets,Make: L&T Cat No.ST98066OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (d) Aux.&Alarm swtich -03Nos,Make:L&T Cat no.CM99804OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (e) Mechanical interlock -03Nos,Make: L&T Cat No.CM99958TOOOA or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (f) MCB SP,6Amps,10kA,C curve-12Nos,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (g) R,Y,B indication lamps-03 Sets,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (h) ON/OFF/TRIP indication lamps-03Nos,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB.

(B)Out goings: (i) MCCB 630Amps Four Pole AC 415 Volts,50Hz,50kA , Adjustable Thermal & Magnetic settings-02Nos free for fixing only. (j)Rotary operating mechanisim-02 No, Make: L&T Cate No.CM99861OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (k) Spreader links -02Sets,Make: L&T Cat No.ST98066OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (l)Aux.&Alarm swtich -02Nos,Make:L&T Cat no.CM99804OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (m)Mechanical interlock -02Nos,Make: L&T Cat No.CM99958TOOOA or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (n)MCB SP,6Amps,10kA,C curve-8Nos,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (o) R,Y,B indication lamps-02 Sets,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB.

(p)ON/OFF/TRIP indication lamps-02Nos,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (q)630/5Amps,15VA Class-1 accuarcy CT's-06 Nos.Make: Srestaa/Newtek. (r)CT shooting terminals -02 Sets,Make:Connect well (s)Multi function meter with RS 485 port -02Nos,Make:L&T Cat no.WL441011OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (C)Other Miscellenous : (t) Aluminium Busbar 1000 Amps with Sleeves -04( three phase with neutral and connectors set of 4). (u)Insulators: SMC/DMC insulators. (v)Fault level: RMS for one minute 65kA. Note:only MCCB,4 pole,50kA,630Amps,50Hz,415volts Ac shall be free for fixing & these shall be measured & paid separately under relevant items(Item No.54)

Design, fabrication, supply and errecting connecting and testing totally enclosed LT Cubical panel board of size not less than 2500x1875x500mm, 3 Phase 4 wire system indoor type 2.00mm ,double door front and back openeing type sloped canopy(Hood) on top extended all-around, separate compartment for each control gear, cable alley,busbar chamber,cable entry, provision of knock out type plates(gland plate) for various sizes of cable up to 400 Sqmm 3.5 Core in and out(Quantity of konck out type plates shall be double for incoming & out going cable entries, panel board shall have sufficent space to accommodate spare cables also) , incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out of 2.00mm indoor thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structral RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on suitable size angle iron frame thick duly painted and embeded in PCC 1:3:6 type C1, 45cm below ground level and 30cm above ground level including taking down old unserviceable at MH and comprising of the following:-

(A)Incoming:- (a) MCCB 400Amps Four Pole AC 415 Volts,50Hz,50kA , Adjustable Thermal & Magnetic settings-03Nos free for fixing only. (b) Rotary operating mechanisim-03 No, Make: L&T Cate No.CM99861OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (c) Spreader links -03 Sets,Make: L&T Cat No.ST98066OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (d) Aux.&Alarm swtich -03Nos,Make:L&T Cat no.CM99804OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (e) Mechanical interlock -03Nos,Make: L&T Cat No.CM99958TOOOA or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (f) MCB SP,6Amps,10kA,C curve-12Nos,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (g) R,Y,B indication lamps-03 Sets,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (h) ON/OFF/TRIP indication lamps-03Nos,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB.

(B)Out goings: (i) MCCB 400Amps Four Pole AC 415 Volts,50Hz,50kA , Adjustable Thermal & Magnetic settings-02Nos free for fixing only. (j)Rotary operating mechanisim-02 No, Make: L&T Cate No.CM99861OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (k) Spreader links -02Sets,Make: L&T Cat No.ST98066OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (l)Aux.&Alarm swtich -02Nos,Make:L&T Cat no.CM99804OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (m)Mechanical interlock -02Nos,Make: L&T Cat No.CM99958TOOOA or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (n)MCB SP,6Amps,10kA,C curve-8Nos,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (o) R,Y,B indication lamps-02 Sets,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB.

(p)ON/OFF/TRIP indication lamps-02Nos,Make:L&T or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (q)400/5Amps,15VA Class-1 accuarcy CT's-06 Nos.Make: Srestaa/Newtek. (r)CT shooting terminals -02 Sets,Make:Connect well (s)Multi function meter with RS 485 port -02Nos,Make:L&T Cat no.WL441011OOOO or its techno commercial equivalent make in Scheider/SIEMENS/ABB. (C)Other Miscellenous : (t) Aluminium Busbar 600 Amps with Sleeves -04( three phase with neutral and connectors set of 4). (u)Insulators: SMC/DMC insulators. (v)Fault level: RMS for one minute 65kA. Note:Only MCCB,4 pole,50kA,400Amps,50Hz,415volts Ac shall be free for fixing & these shall be measured & paid separately under relevant items(item No.55).

Supply and fix MCCB 630Amps Four Pole AC 415 Volts,50Hz,50kA , with Adjustable Thermal & Magnetic settings Make: L&T Cat No CM94104OOT1OG or its techno commercial equivalent make in Scheider/SIEMENS/ABB.

Supply and fix MCCB 400Amps Four Pole AC 415 Volts,50Hz,50kA , with Adjustable Thermal & Magnetic settings Make: L&T Cat No CM94104OOS1OG or its techno commercial equivalent make in Scheider/SIEMENS/ABB.

M&L for Supply, test, erection & commissioning of Steel tubalar swaged poles staying in a truely vertical position till the foundations are properly set with the help crane complete with cast iron base plate, finial taper plug, bolts, nuts & screws including drilling of holes to poles for clamps & hooks for running of earth wire/Strip complete all as specified type 410 SP-31,09 mtrs LT poles and inluding and applying two coats of aluminum paint over a coat of red oxide primer and marking of zebra crossings up to a height of 1.0m above the coping with black and yellow strips of synthetic enamel paint including white wash to the coping and marking of pole numbers complete all as directed by Engr-in-Charge. Note:- (i) Crane charges for erection shall be deemed to be including in quoted rate. (ii) Earth work, PCC, coping shall be deemed to invluding in quoted rate. (iii) The rates include staying the poles in truely vertical position till the foundations are properly set. (iv)The rates include cast iron base plate, nuts, bolts, screws, painting of steel tubular poles, drilling of holes in steel tubular poles for fixing of clamps, hooks for continuous earth wire/strip. (v) The rate quoted shall be inclusive of pole painting.

M&L for stay assembly with all accessories as shown in Electrical Plate No 1 of SSR Part I (2009) with 16 mm dia stay rod and including 7/2.24 mm size stay strand and stay clamps including dismantling old unserviceable stay assembly complete all as specified and directed. Note : Loop type insulator, excavation, earth work and concrete shall be measured and paid separately under relevant items of this schedule.

Supply & laying cement concrete in foundation (1:4:8) type D2 using 40 mm graded broken stone aggregate including form work complete as specified

Supply and laying PCC (1:3:6) 20mm graded aggregate type C1 forcoping of Steel tubalar pole 09 mtrs long complete all as directed by Engr-in-charge

Supply and laying PCC (1:2:4) type B2 40mm graded aggregate for foundation of Steel tubular pole 09 mtrs long complete all as directed by Engr-in-charge

Supply & fixing of 4 pole power contactor MCX-12,50Hz suitable for existing one and including taking down old unserviceable one complete all as direrected by Engr-in-Charge. Make L&T/Schnieder/Siemens

Supply & fixing of 4 pole power contactor MCX-23,50Hz suitable for existing one and including taking down old unserviceable one complete all as direrected by Engr-in-Charge. Make: L&T/Schneider/Siemens

Supply & fixing of 4 pole power contactor MCX-33,50Hz suitable for existing one and including taking down old unserviceable one complete all as direrected by Engr-in-Charge. Make: L&T/Schneider/Siemens

Framed work Mild steel framed work with angle iron frame for mounting Light fittings in four sides including including necessary welding, bolts, washer and painting exposed surfaces with two coat of synethic enemal paint over one coat of Red oxide primer all as specified and directed by Engr-in-Charge

Supply and fixing of PVC Junction box of size 11'x8'x4',light weight pole mounting including MCB 4P 10Amps -1 No including necessary clamp MCB mounting and mounting of Box on pole with MS flat frame arrangement and necessary connector for looping in and looping out cable connection and suitable glands complete all as directed by Engr-in-charge. Make :- SINTEX/Polycon

Supply, install, test, calabrate and commssioning of AC Three Phase LT-CT Multifunction Energy meter of Accuracy Class 0.5, 3 X 240V, 50Hz With Optical & RS232 Port,Backlit LCD Display, Measures & Displays Trivector Energy, Load survey, TOD,Tamper detection & logging,Power On/Off Events, instantaneous parameters of Rating -/5A with display in absence of power including connection of CT coil in all three phases and suitable size hinge type transperent poly carbonate made box,neccesary sealing arrangement complete all as directed by Engr-in-Charge. Make HPL Cat No.TLPB2823130000OCA0 or its techno commerical equivalent in L&T

Supply & Fix of LED flood light fittings of capacity 60W with integral electronic driver,Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting. Also suitable to rough services/installations including connecting with necessary cable and screws,nuts,bolts complete all as directed by Engr-in-Charge. Make:Havells cat no.JETAQUANTOPLUSFLP60WLED757SYM or its techno commerical equivalent in Philips/Wipro

Supply and fixing of current transfromer 100/5Amps,5VA Class-0.5 accuarcy along with CT shoot terminals including terminations & making connections to metering equipment complete all as directed . Make: Srestaa/Newtek.

M&L double sided glow sign board in any size as directed showing location / Details of power house /Tech area and writing of letters (Block,Roman,Italic) on flex sheets and the sides of perimeter covered with PGI sheet 24 SWG, properly overlapped or mounted on MS angle iron 35x35x5 mm 'H' frame with cross brasings, embedded in PCC bed block of size 300x300x450mm with cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate and the MS frames shall be given two coats of synthetic enemal paint over a coat of primer including fixing of 03 Nos LED 4 feet 18W in side of the each board with required point wiring with suiatble size of stranded copper conductor,pvc insualted FR cables complete all as specified and directed.

M&L sign board of size 150cmx90cm made on MS plate with suiatble thickness of E/M installations including preparation for paiting by rubbing scrapping removing of rust/dirt or grease from the surface and paiting with two coats of synthetic enamel light blue paint over a coat of red oxide primer and writting the E/M Installation name etc with white paint of letter not exc 10cm hight 10 cm in English and sign board mounted on suitable size of MS angle iron 'H' frame with cross brasings, embedded in PCC bed block with cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate complete all as directed by Engr-in-Charge.

M&L for ACSR conductor, steel reinforced for LT over head lines on poles including streching tightining of poles insulator with binding wire of suitable size with insulator/streching of ACSR conductor including disconnecting/taking out old existing unsv ACSR conductors complete all as specified and directed.

Cross-arms, Bracings, Supports, Clamps and Back Plates fabricated from Structural Steel Sections including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated or directed and inclusive of One Coat of Aluminium Primer, One Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and as directed.

Taking out and refixing of Steel pole 9/11 m long at new location complete including excavation, returning filling, removing compolete all as specified and directed.Note only PCC will be measured and paid separately under relivent item .

Supply and replace contactor 4 pole Model MCX 43 of L&T make coil operating voltage 440 volt complete all including taking down old one complete all as directed

M&L preparing Steel and Iron Surfaces of any description, over 100mm width or girth and applying One Coats of Synthetic Enamel Paint (First quality) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

S&F Insulator Pin type of size 100 mm height, 65 mm dia for 1100 Volt grade, porcelain, vitreous, white, brown or green including one galvanized MS Spindle, two GI washers and one GI washers including disconnecting/taking out old existing unsv insulators complete all as specified and directed.

S&F Insulator Shackle type of size 100 mm height, 115 mm dia for 1100 Volt grade, porcelain viterous, white, brown or green including galvanised mild steel straps of size 31x5 mm, washers, insulator bolts of size 14 mm and nuts including disconnecting/taking out old existing unsv insulators complete all as specified and directed.

S&F loop type insulator type of size 100 mm height, 115 mm dia for 1100 Volt grade, porcelain viterous, white, brown or green including galvanised mild steel straps of size 31x5 mm, washers, insulator bolts of size 14 mm and nuts including disconnecting/taking out old existing unsv insulators complete all as specified and directed.

M&L for boring of horizontally holes under the road below 1.5 mtr from the road/hard surface by trench less technology using ultra sound technique and including necessary machine without damaging the existing road and getting out in any type of soil and disposal of soil to a distance not exceeding 50m from the site of work including supply & laying DWC HDPE pipe up to 150 mm dia suitable for 0.4 MPA work pressure.

Supply&Fixing heavy duty box type capacitors 40kVAR(20+20) fixing in 50cm x50cm x30cm MS enclosure(3.15mm thick & CPRI approved) with hinged type door for opening and closing (duly powder coated) including necessary wiring & misc accessroies, panel mounted on suitable size MS angle iron frame thick duly painted and embeded in PCC 1:3:6 type C1, 45cm below ground level and 15cm above ground level and for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. Make:L&T/Schnieder/Seimens

Supply&Fixing heavy duty box type capacitors 20kVAR fixing in 30cm x30cm x20cm MS enclosure(3.15mm thick & CPRI approved) with hinged type door for opening and closing (duly powder coated) including necessary wiring & misc accessroies, panel mounted on suitable size MS angle iron frame thick duly painted and embeded in PCC 1:3:6 type C1, 45cm below ground level and 15cm above ground level and for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. Make:L&T/Schnieder/Seimens

Supply&Fixing heavy duty box type capacitors 10kVAR fixing in 30cm x30cm x20cm MS enclosure(3.15mm thick & CPRI approved) with hinged type door for opening and closing (duly powder coated) including necessary wiring & misc accessroies, panel mounted on suitable size MS angle iron frame thick duly painted and embeded in PCC 1:3:6 type C1, 45cm below ground level and 15cm above ground level and for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. Make:L&T/Schnieder/Seimens

Supply&Fixing of 3 pole MCB,32-40amps,C-curve,10kA,50Hz,440v in existing panel including necessary wiring & misc accessroies for satisfactory completion of job and taking down old unserviceable one complete all as directed by Engineer-in-Charge. Make:L&T/Schnieder/Seimens

Supply&Fixing of 3 pole MCB,6-25amps,C-curve,10kA,50Hz,440v in existing panel including necessary wiring & misc accessroies for satisfactory completion of job and taking down old unserviceable one complete all as directed by Engineer-in-Charge. Make:L&T/Schnieder/Seimens

Taking down and Re-fixing of Cross-arms, Bracings, Supports, Clamps and Back Plates, etc (Serviceable Materials obtained during taking down ) including applying One Coat of Aluminium Primer, One Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and as directed.

Taking out and Re-fixing ACSR Conductor of any size (serviceable ACSR Conductor obtained during taking down ) on Electric Poles and with binding to Insulators with Aluminium Binding Wire as in OH Con-ductors including Stringing, Tighten-ing, complete all as specified and as directed.

M & L Cradles, hexagonal/rectangular fabricated with Galvanised Steel Wire with 4.00/3.15 mm dia and fixed, complete all as specified and as directed.

Re-stringing of LT over head line ACSR conductor on existing lines by unbinding at each pin/shackle type insulator and re-fixing the same after stretching conductor, removing exess sag, maintaining proper dintance between conductors as specified, trimming of tree branches, girth n. exc 30 cm up to two meter distance form line conductor, tightening of stay wire and making pole properly vertical all as specified and as directed.

S&F galvasised steel strip 32X6 mm with saddles and fixing screws on poreceling insulator/ spacer fixed at every 1 mtr length as lightening conductor on roof/wall of explosive building and joining the same with existing earth test point all as directed by Engr-in-Charge.

Supply and fix stay wire galvnised stay strand of size 7/3.15mm

Supply Anf Fix Pvc Separator Suitable For Lt 440 Volt Line Round Type Madeout Of 20mm Dia Heavy Duty Pvc Pipe Of Length Not Less Than 30cm, Suitable For Two Line Complete All Including Necessary Fixing Arrangement All As Specified And Directed

Supply anf fix pvc separator suitable for lt 440 volt line round type madeout of 20mm dia heavy duty pvc pipe of length not less than 0.90rm, suitable for four line complete all including necessary fixing arrangement all as specified and directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 METRE mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

Preparation of old painted surface removing of rust from steel poles,cross arms,cable protection pipes,clamps etc for of any description and repainting by 1st quality aluminium paint 1 coat over a coat of primer where required for surfaces under and over 10 cm width or girth(including writing of pole number by white paint 10 cm height over a rectangular surface of black synthetic enameled paint.)

Preperation of concrete surface of PCC pole 8.0 Mtr.long and carrying out cement base paint one coat above 1.5 mtr.from ground level upto the top of the pole and two coat of 1st quality synthetic enameled paint upto the height 1.5 mtr from the ground level with multicolour strips as per the colour code as directed and specified(including writing of pole number by white paint 10 cm height over a rectangular surface of black synthetic enameled paint.)

M&L for PVC insulated three core 1.5sqmm multistrand copper conductor for connection of Securiry light from DB to Security light /OH conductor to security light/ pole to pole connection etc all acomplete as specified and directed

Material and Labour for drawing two runs of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 2.50 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm including 20mm dia PVC conduit of dia 20 mm medium gradeexclusive of boxes but inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, clamps etc complete all as specified

Supply and replace GI pipe fixed on the top of gate piller by 50 mm dia medium grade GI pipe of length 30 cm( 20 CM inside the piller and 10cm above the piller ncluding necessary cement work and making hole on GI pipe if required complete all as directed. Note: Quoted rate inclusive of making good of dosturbed suface including necessary painting to match with the adjoining surface.

Supply fixing connecting and testing LED Post top lantern of 35/40 watt capacity with diffuser and painted aluminium deflector including nut, bolts, washers, clamps etc complete all as specified and directed by Engr -in-charge Make surya Cat Part No SLEPT 40 W ETPP or CG MODEL NO LPTO 40 CDL equivalent from havells/wipro

Supply fixing connecting and testing LED Post top lantern of 20 watt capacity with diffuser and painted aluminium deflector including nut, bolts, washers, clamps etc complete all as specified and directed by Engr -in-charge Make SURYA MODEL SLEPT 30W ETPP or CG MODEL NO LPTH 20 CDL

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 4.0 Sqmm for connection of light complete all as specified and directed

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 6.0 Sqmm for connection of light complete all as specified and directed

M&L for twin core 1100 volt grade aluminium service wire cross sectional area10 Sqmm for connection of light complete all as specified and directed

Supply ,Install Testing &Commissioning of wall mounted Indoor type totally enclosed LT panel Board CPRI APPROVED , IP 55 compartmentalised design, dust and varmin proof of suitable size suitable for 440 Volt 3 phase 4 wire system made out of 2.0mm thick CRCA sheet and built upon regid frame work having front hinged doors with neoprence rubber gasket including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts ;and washers etc. The pannel shall be Epoxy Powdwer Coated and the control circuit diagram shall be with colour code solid conductor copper 1.5 sqmm cable for easy identification including incomming/outgoing cable holes at the bottom and TOP. The Panel shall be emmbeded with 40 x 4 mm MS Angle Iron frame a complete all as specified and directed by Engr in charge.

Note:i) All Internal connection between MCCB and Changeover and Bus bar shall be connected by aluminium strip of suitable size and capacity. (II) All MCCB to be connected with both side Spreader Link. The rate shall deemed to be include in the item rate . iii) Size of the Panel Board shoul not be less than 0.75MXO.65m X0.30M

Supply, Installation, test and Commissioning CPRI APPROVED factory fabricated, out door type,LT FEEDER PILLAR BOX made out of 3.15 mm thick CRCA Sheet with projected Globe roof for rain water protection Dust and Vermin Proof , Double door with both side opening including Neoprene Rubber Gasket,, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeded with 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level comp -lete with internal connection with suitable size of cable ,cable lugs,and cable glands PCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Test-ing after Installation including taking down unser-viceable Feeder Pillar Box complete all as specified and comprising of the following :–

Note:i) All Internal connection between MCCB and Changeover and Bus bar shall be connected by aluminium strip of suitable size and capacity. (II) All MCCB to be connected with both side Spreader Link. iii) Size of the Panel Board shoul not be less than .75MXO.60m X0.30M. The rate shall deemed to be include in the item rate .

Supply, Installation, test and Commissioning CPRI APPROVED factory fabricated, out door type,LT FEEDER PILLAR BOX made out of 3.15 mm thick CRCA Sheet with projected Globe roof for rain water protection Dust and Vermin Proof , Double door with both side opening including Neoprene Rubber Gasket,, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeded with 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level comp -lete with internal connection with suitable size of cable ,cable lugs,and cable glands PCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Test-ing after Installation including taking down unser-viceable Feeder Pillar Box complete all as specified and comprising of the following :–

(a) Aluminium bas bar 200amps - 04 Nos, supported with suitable size of heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. b) MCCB 160 amps ,415 volt ,16 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar As IN COMING - 02 NosMake Legrand model no: 420017/ Equivalent from Schinder/L&T/Hagar c)MCCB TP,63 Amp, 3 Pole, 415 Volt, 16 KA Breaking Capacity duly connected to Bus-bar as OUTGOING - 04 N0s.MAKE : Legrand model no: 420003 /L&T/Hagar (d) LED indicating lamps with holder for main supply indicating RYB - 01 set(03 Nos) Make AE/L&T (e) Instrument fuse holder, fused 4 amps - 06 Nos. Note:i) All Internal connection between MCCB and Changeover and Bus bar shall be connected by aluminium strip of suitable size and capacity. (II) All MCCB to be connected with both side Spreader Link. iii) Size of the Panel Board shoul not be less than 0.70MXO.6m X0.30M. The rate shall deemed to be include in the item rate

Supply, Installation, test and Commissioning CPRI APPROVED factory fabricated, out door type,LT FEEDER PILLAR BOX made out of 3.15 mm thick CRCA Sheet with projected Globe roof for rain water protection Dust and Vermin Proof , Double door with both side opening including Neoprene Rubber Gasket,, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeded with 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level comp -lete with internal connection with suitable size of cable ,cable lugs,and cable glands PCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Test-ing after Installation including taking down unser-viceable Feeder Pillar Box complete all as specified and comprising of the following :–

Supply ,Install Testing &Commissioning of wall mounted Indoor type totally enclosed LT panel Board CPRI APPROVED , IP 55 compartmentalised design, dust and varmin proof of suitable size suitable for 440 Volt 3 phase 4 wire system made out of 2.0mm thick CRCA sheet and built upon regid frame work having front hinged doors with neoprence rubber gasket including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts ;and washers etc. The pannel shall be Epoxy Powdwer Coated and the control circuit diagram shall be with colour code solid conductor copper 1.5 sqmm cable for easy identification including incomming/outgoing cable holes at the bottom and TOP. The Panel shall be emmbeded with 40 x 4 mm MS Angle Iron frame a complete all as specified and directed by Engr in charge.

(j) LED indicating lamps with holder for main supply indicating RYB - 01 set(03 Nos) Make AE/L&T (k) Instrument fuse holder, fused 4 amps - 06 Nos. Note:i) All Internal connection between MCCB and Changeover and Bus bar shall be connected by aluminium strip of suitable size and capacity. (II) All MCCB to be connected with both side Spreader Link. Size of the Panel Board shoul not be less than .75MXO.60m X0.30M. The rate shall deemed to be include in the item rate

S&F Junction box box made of sheet of 2mm thick size 25X25X15 CM Powder coated Suitable for fixing at Pole including two set of clamps comprising with the following i) MCB SPN 20Amps 10 KA- 01 nos , ii) MCB SP 10 Amps - 4 Nos iii) Connecter 5 way 20 amps for neutral tappings complete all including internal connection done by using Suitable size of copper wire complete all as specified and directed.

Supply and fix MCCB 63/100 amps 4 pole 16 ka with both side spreader link along with and including its enclosure complete all as specified and directed. Make : Havells/L&T/ABB

Supply and Replace Changeover Switch 100 Amps TPN ON load type 415 Volt with side handle. Make: Havells/L&T/HPL

Supply and replace spreader link suitable for 63/100 amps MCCB complete all as directed

Supply and replace spreader link suitable for 125/160 amps MCCB complete all as directed. Make must be competable for site requirement

Supply and replace spreader link suitable for 160/200 amps MCCB complete all as directed.Make must be competable for site requirement

Supply and replace spreader link suitable for 250/315 amps MCCB complete all as directedMake must be competable for site requirement

Supply and replace spreader link suitable for 400/630 amps MCCB complete all as directedMake must be competable for site requirement

S & Lay GI tubing light grade of following size 80 mm for cable protection on road/drain/floor/Pole including necessary clamps. .40x4mm.Make : TATA/Jindal/Bansal with ISI makred.

S & Lay GI tubing light grade of following size 50 mm for cable protection on road/drain/floor/Pole including necessary clamps. .40x4mm.Make : TATA/Jindal/Bansal with ISI makred.

S & Lay GI tubing light grade of following size 40 mm for cable protection on road/drain/floor/Pole including necessary clamps. .40x4mm.Make : TATA/Jindal/Bansal with ISI makred.

Servicing of capacitor panel of size not less than 30 KVAR complete including testing all components including relay, capacitor, contactor, operating coil of contactor , mcb wiring etc complete all including making the panel serviveable complete all as directed. ( S&F of Spares to be measured and paid separately under relevent items)note : rate quoted by the contactor inclusive of complete engineering charges to check and identyfy the faulty components and reason of malfunctioning

Excavation of transformer structure yard upto a depth of 300mm and Removing excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 above the starting point complete all as directed by Engr -in-charge.

Supply and spread stone dust (powder) of thickness 50mm in 2 pole/6pole structure yard complete all as directed by Engr-in-charge.

Supply and spread grade stone aggregate 40 mm in structure yard of 2/4 poles complete all as directed by Engr-in-charge.

Supply and spread grade stone aggregate 20 mm in structure yard of 2/4 poles complete all as directed by Engr-in-charge.

Supply, Installation, test and Commissioning CPRI APPROVED factory fabricated, out door type,LT FEEDER PILLAR BOX of size 0.6 mX0.4MX0.3M made out of 3.15 mm thick CRCA Sheet with projected Globe roof for rain water protection Dust and Vermin Proof , Double door with both side opening including Neoprene Rubber Gasket,, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeded with 50X50X6mm Mild Steel Angle Iron Frame and 400 mm above the Normal Ground Level comp -lete with internal connection with suitable size of cable ,cable lugs,and cable glands PCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Test-ing after Installation including taking down unser-viceable Feeder Pillar Box complete all as specified and comprising of the following :– (a) Aluminium bas bar 200amps - 04 Nos, supported with suitable size of heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. b) MCCB 100 amps ,415 volt ,16 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar As IN COMING - 01 NosMake Legrand model no: 420015/ Equivalent from Schinder/L&T/Hagar

Universal refrigeration and Engineering Company

SUN LIGHT HOUSE

SANJEEV CONSTRUCTIONS

POWER CONSTRUCTION COMPANY

STANDARD AGENCIES

The Deccan Engineering and Refrigeration Company