Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-AOC C O OPPOSITE BDO OFFICE MANDA AKHNOOR DISTT JAMMU PIN 181201 | JAMMU | JAMMU AND KASHMIR | 181201 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.0 L+₹1.7 L (5.22%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹35.3 L+₹2.0 L (6.06%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹37.6 L+₹4.3 L (13.0%)Rejected-Finance | L4 | Rejected-Finance Rejected |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
3 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Faridkot
GE Faridkot Military Station
Provn of guard room with toilet and bathroom at barrier gate of SASF and certain sanctioned works at Faridkot Mil Stn
2023_MES_631165_1
GE FRD-69/2023-24
Open Tender
Civil Works
Item Rate
240 days
GE Faridkot
Class D Category a i
9 documents required · 9 mandatory
₹500
GE Faridkot
₹87,000
Yes
20 Jan 2024
5 Dec 2023
5 Jan 2024
5 Dec 2023
3 Jan 2024
20 Dec 2023
Amount
Surface dressing not exceeding 15 cm deep and getting out in any type of soil complete all as specified and directed.
Excavation in trenches in any type of soil not exceeding 1.5m deep and 1.5m wide, for foundation etc or manholes,piers,shafts etc not exceeding 10 Sqm on plan and getting out complete all as specified and directed.
Returning, filling in,including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed .
M&L for plain cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed .
M&L for providing Reinforced Cement Concrete M-25 (Design Mix) (using 20 mm graded crushed stone aggregates) as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc complete all as specified and directed.
M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum. per sqm including polythene film, black, 50 micron thick complete all as specified and directed .
M&L for providing Reinforced Cement Concrete M-25 (Design Mix) (using 20 mm graded crushed stone aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for providing Reinforced cement concrete M-25 (design mix), (using 20mm graded crushed stone aggregates) as in lintels over 1.5 mtr clear span, siesmic band,beams,cantilevers and similar works complete all as specified and directed .
M&L for providing Reinforced cement concrete M-25 (design mix), (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams, columns,landings,balconies, canopies,deck slabs and in shelves and other similar works complete all as specified and directed and directed .
M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished surfaces of concrete all as specified and directed.
M&L for use and waste of form work to sides of pillars,struts,piers and columns square/rectangular for fair finished surfaces complete all as specified and directed.
M&L for use and waste of form work to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantlievers, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and directed.
M&L for use and waste of form work to soffits of suspended slab such as roof slabs, not exceeding 200mm thick, horizontal or sloping complete all as specified and directed .
M&L for Mild steel TMT bars 6 to 10mm dia and over, cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .
M&L for Mild steel TMT bars 5 mm dia and over upto & including 10mm dia, as in stirrups, spacers and binders,cut to length bent to shape required including cranking, binding spirally for hooping for columns, hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securining with clip complete all as specified and directed .
M&L for sand filling under floor,foundation with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed .
M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .
M&L for 75 mm thick cement concrete 1:3:6 type C-2( using 40mm graded crushed stone aggregates) as in plinth protection/path, finishing surfaces even and fair complete all as specified and directed .
M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, grade A complete all as specified and directed .
M&L for 100mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed .
S&F Machine cut kota stone slab in flooring ,20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
S&F Machine cut kota stone slab 20-25mm thick as in skirting,steps,dado,& pillars, set and jointed in cement slurry over & including 15 mm thick rendering in cement mortar1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
M&L for brick work with fly ash brick, old size, straight or covered on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed .
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 Cement : 4 Coarse Sand) the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement Plaster 1:1/2:2 (1 Cement : 1/2 Coarse sand : 2 Stone chipping 10mm nominal size) in panels with grooves all round as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note : Payment for providing grooves shall be made separately)
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
M&L for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coat of white wash complete all as specified and directed .
M&L for preparation of newly plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:3 with WPC on fair faces of brick work or concrete surfaces as in roof complete all as specified and directed . Note : WPC will be measured and paid separately
Supply only integral water proofing compound.
M&L for one coat of approved bituminous primer for use in water proofing and damp proofing treatment @ 0.70 Ltr/Sqm complete all as specified and directed .
Supply and fix APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gms/sqm) laid over primed surface by using forced application complete all as specified and directed. Note : (i) The treatment shall be carried out as per the manufacturers instructions and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment (iii) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer.
M&L for applying two coats of aluminium paint over APP membrane complete all as specified and directed .
S&F Mild Steel framed work such as grills, gratings etc. with ends of bars shoulderd and/or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,cooler stand,ladder and similar work conforming to Fe290, Gde-E-165 complete all as specified and directed.
S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete with glazing bars dovetailed or welded with one shop coat of zinc chrome primer complete all as specified & directed.
S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete without glazing bars dovetailed or welded with one shop coat of zinc chrome primer complete all as specified & directed.
M&L for 3.0 mm thick, plain sheet glass ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.
S&F 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (two number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed.
S&F factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.
M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and one coat of zinc chrome primer complete all as specified and directed.
S&F Solid wood moulded grain printed PVC door frame of size 50mm x 95 mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. square tube, egdes will be painted to match printed sheets complete all as specified and directed .
S&F Factory made solid PVC moulded door shutter ,28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded with woodfree EPS PVC sheet on the front face & 2mm plain colour PVC sheet on back face to be fitted in the MS frame welded/ sealed to the style & rail with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed .
S&F aluminium anodised barrel tower bolts,150 mm long of extruded section, fixed to doors with screws complete all as specified and directed .
S&F aluminium handle of size 125mm,fabricated type, anodised complete all as specified & directed.
S&F 100mm long mild steel butt hinges, medium weight, cold rolled fixed with screws complete all as specified and directed.
S&F 100 mm floor door stopper of cast iron body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .
S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .
S&F 2nd class hard wood small fittings such as brackets of any type,latch and hinge blocks,shaped door and window stops and the like including necessary labours ,articles not exc 200 cu.cm each complete all as specified & directed.
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed .
S&F coloured Glazed ceramic tiles 450X300X7mm /350x250x7mm thick on vertical surface such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade over and including 10mm thick rendering in cement mortar 1:4 on brick or concrete surface complete all as specified and directed.
S&F vitreous china bowl urinal ,flat back of size 465x355x265mm , white,with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar, including connections to flushing pipe and outgoing pipes,32mm boe flush pipe & half turn valve 15mm bore complete all as specified & directed .
S&F vitreous china Wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, pillar taps,fancy type,chromium plated ,cast copper alloy, with capstan head, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore and PVC connection 15mm size, 450mm long with PTMT nut and other end fixed complete all as specified and directed.
M&L for Steel water tubing of 15 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
M&L for Steel water tubing of 20 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
S&F PVC (SWR) floor trap, 75 mm dia, plain with stainless steel grating including jointing with solvent cement complete all as specified and directed.
S&F 10 litres PVC,valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity.triple layered, hoisted and fixed in position including ball brass valves, high pressure, with polythene float and fly nut screwed for 20mm bore iron pipe complete all as specified and directed .
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .
S&F PVC (SWR) bends any radius ,110mm bore complete all as specified and directed.
S&F vitreous China squatting pan 'Orissa pattern', size 580mm x 440mm white / coloured, with integral foot rest including flush pipe and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete all as specified and directed. .
S&F PVC connection 15mm dia 45 cm long with brass nut and washer both side complete all as specified and directed.
S&F pillar taps,fancy type,chromium plated ,cast copper alloy, with capstan head, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F 15mm bore bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down of iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F Stop valve, chromium plated,cast copper alloy,screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed .
S&F Stop valve,,cast copper alloy,screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 20mm bore complete all as specified and directed .
S&F swivel shower of PTMT, of any colour for fixing with 15mm pipe, (minimum weight 40 grams) with shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour including fixing to steel pipe complete all as specified and directed.
S&F Tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed .
S&F PTMT shelf fixed with and including chromium plated brass screw and plastic cleat complete all as specified and directed.
S&F Aluminium hat pegs, solid body, 225mm to 300 mm complete all as specifed and directed .
S&F 15mm dia stop cock, cast copper alloy, fancy type,chromium plated, concealed type with long shank with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .
M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping,bed blocks and similar works including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.
Removal of surplus soil to a distance not exceeding. 50 m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .
M&L for plain cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed .
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and directed .
M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab, rounded or chamfered on edge included neccessary formwork, set in cement mortar 1:4 complete all as specified and directed .
S&F Reinforced concrete pipes of size 150mm (internal dia),class NP-2 (ISI marked) laid, jointed and tested complete with collar complete all as specified and directed .
M&L for Concrete bed to drain pipes of dia 150mm in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid & tested complete all as specified and direced .
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2) round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required (Internal Dia of pipe in 150mm) complete all as specified and directed.
M&L for Machine pressed precast concret interlocking paver block, any shape and size, conforming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment all as specified and directed .
S&F factory made precast kerb stones in PCC 1:2:4 type B-1(using 20mm graded crushed stone agreegates) including chamfers, weatherings,throatings etc in smooth finish & set in cement mortar 1:4 including necessary excavtion and earth work for embedding kerb stone at a depth as directed and temping around kerb stone and removal of surplus soil to a distance not exceeding 50 m and depositing where directed complete all as specified and directed .
M&L for preparation of new plastered /concrete surface and painting with two coats of synthetic enamel paint (white/golden yellow) over a coat of primer complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed
Rough excavation in any type of soil not exceeding 1.5m deep complete all as specified and directed.
Removal of surplus soil to a distance exceeding. 1.5 KM but n.exc 5.0 KM & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed
M&L for 100mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base,mass filling complete all as specified and directed .
Demolition of Cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed .
Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement complete all as specified and directed.
M&L for Running welding in repairs thickness of metal exc 9 mm but n.exc 20mm complete all as specified and directed.
M&L for use and waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs, n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n. exc 20cm wide fair finished surface complete all as specified and directed.
S&F anodised aluminium frame & shutters for doors, window, ventilators with powder coating on aluminium (minimum thickness of powder coating 50 micron & of standard sections) as per the specification including necessary fittings & fixtures as required complete all as specified and directed.
S&F 4mm thick, figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed .
S&F Solid wood moulded grain printed PVC door frame of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. square tube, egdes will be painted to match printed sheets complete all as specified and directed .
S&F Factory made solid PVC moulded door shutter ,28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed .
S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.
S&F aluminium anodised barrel tower bolts,200 mm long of extruded section, fixed to doors with screws complete all as specified and directed .
S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
S&F in repair MS powder coated decorative drapery rod (colour as approved) 20mm dia of approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.
M&L for Vitrified ceramic tiles, light shade, 8 to 9 mm thick (square/ rectangular), polished,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
M&L for Vitrified ceramic tiles, light shade, 8 to 9 mm thick (square/ rectangular), polished,area of each tile not exceeding 0.36 sqm,as in vertical surfaces such as skirting/dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying finishes complete all as specified and directed .
S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .
S&F angle cock/ stop cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed .
S&F in repair brass chromium plated sink mixer / Centre hole Basin Mixer, swan neck type for mixing of hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed .
S&F in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestel pattern) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover,white in colour with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed.
S&F vitreous china Wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore,complete all as specified and directed.
S&F sheet glass shelf assembly, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in brass chromium plated overhead shower 125mm size with swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed .
S&F in repair PTMT cabinet with mirror of size 622x422mm complete all as specified & directed. Make : Prayag Cat No. 555 or equivalent make as given in PS
S&F in repair Grating doom, 100 mm dia of PTMT (minimum weight 50gms) jointed to PVC pipe complete all as specified and directed
S&F Toilet paper Holder Brass finish glossy fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
S&F Towel rail, 450mm long of PTMT, fixed with and including chromium plated brass screws and wooden and plastic cleats ( minimum weight 170gms ) complete all as specified & directed
S&F 75mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed .
S&F cast iron vent cowls ,bore of pipe 75mm complete all as specified and directed .
S&F CI bends, diminishing pieces or tapers, bore of pipe 75 mm complete all as specified and directed
S&F Cast iron floor trap, long neck, 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .
M&L for Roof Treatment as specified below and as directed : (a) Cleaning, washing of surface and removing all existing bitumen coatings/ APP membrane completely with intense wire brushing or high speed water jet. Surface should be free from any loose paint, dust or grease. (b) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars. (c) Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm (0.20 kg BTD+0.20 Kg water) (d) Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls. (e) Applying three coat of HydroShield PUD microfibre reinforced UV resistent polyurethane (solid content 68% ) / Damp Proof ultra UV Stable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured (Elongation 400% ± 50, Solid Contents > 80% & Specific Gravity @ 30 OC 1.5 ± 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm, with paint brush/ roller upto 300 mm on walls. (f)) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Note (i) The treatment shall be carried out as per the manufacturer's instructions, and as directed by Engineer-in-Charge. (ii) The plan area of floor shall be considered for payment.
M&L for 18 to 20mm thick Granite (of approved type and colour) work (table rubbed and polished) as in cooking platforms, stair case landing or steps and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with approved shade of granite complete all as specified and directed.
M&L for aluminium sliding door partition with 12mm thick frosted toughened glass complete all as specified and directed.
Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLS with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit of suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc, covered with 2.8mm thick plastic laminate Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers, painting terminal boxes inside and outside with one coat of red oxide primer including continuous earth wire of size 1.5 Sqmm PVC stranded copper conductor unsheathed, insulated, stranded (Green colour) connected to common earth point dolly for for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed .
All as per Ser item No 131 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on same board with other switches complete all as specified and directed .
All as per Ser item No 131 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on independent board complete all as specified and directed .
All as per Srl item No. 131 here-in-before for Switch socket combination (multi purpose) 6 Pin 15 Amps 230 volts point to be controlled by one switch and wiring with 2.5Sqmm FRLS PVC unsheathed copper conductor and FRLS cable 2.5 Sqmm PVC insulated earth wire on independent board.complete all as specified and directed .
S&F PVC Lamp holder with back plate suitable for batten fittings complete all as specified and directed .
S&F LED bulb 1 x 10 watt Lamp having luminous efficiency warranty 2 years complete all as specified and directed .
S&F complete set of tube light fitting, 1x20 watt LED (4 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
S&F complete set of tube light fitting, 1x10 watt LED (2 feet long) 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed .
S&F ceiling rose, three terminals, PVC polycarbonate, isolated body with bakalite 20mm back plate complete all as specified and directed .
S&F switch piano, flush type, single pole, one way, 5 /6 Amp,230 V,AC supply complete all as specified and directed .
S&F socket outlet, two in one, 5 Pin 5 Amps, 230 Volt, AC supply, complete all as specified and directed.
S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 volts AC supply complete all as specified and directed.
S&F socket outlet ,2 in 1, 5/6 pin, 15/16 Amps, 230 volts ,AC supply complete all as specified & directed.
S&F Modular switch 1 way 6 amps, one module complete all as specified and directed.
S&F Modular socket 6A -2/3 pin combined, 2 module complete all as specified and directed.
S&F Modular switch 1 way 16 amps, 1 module complete all as specified and directed.
S&F Modular socket 6A /16A - 2/3 pin combined, 2 module complete all as specified and directed.
S&F factory made epoxy polyester powder coated distribution board TP&N ,4 ways (VTPN DB), double door,(concealed flush to wall) (IP-42 protection) fabricated from minimum 1.2 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 250 Amps bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with space for provision for 4 pole MCCB as incommer and outgoing MCBs as required at site and conforming to IS: 8623 along with cable end box including making good disturbed surface complete all as specified and directed. NOTE: (a) MCCBs and MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of BoQ.
S&F Sheet metal enclosure for DBs,SPN, double door, 230 Volts,8 ways with 200 amps rated bus bar complete all as specified and directed .
S&F MCCB 4 Pole,adjustable type ,415 V, 63 Amps with breaking capacity 16 KA complete all as specified and directed.
S&F MCB SP 5 to 32 Amp, 230 volts, B Curve with breaking capacity 10 KA complete all as specified and directed .
S&F MCB, SPN, 32 amps, 230V, C Series with breaking capacity 10 KA complete all as specified and directed.
S&F exhaust fan ,steel body, AC single phase,copper winding, 4 blades with self closing GI louver shutter suitable for operation on 220/230 volts of 300mm sweep and including three core copper flexible wire 1.00 mm dia drawn into and including PVC flexible conduit and hanging on wall with 4 Nos steel fasterners 10mm dia & 100mm long including wall hole and making good the disturbed surfaces as per existing complete all as specified & directed .
Supply & fixing Energy efficient Ceiling fan complete with blades, down rods, electronic type regulator & accessories, 230 V,1200mm sweep, minimum air delivery 245 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) including writing of MES number (Black, Roman, Italic or Indian) n. exc 30cm height complete all as specified and directed.
Supply & fixing Energy efficient Ceiling fan complete with blades, down rods, electronic type regulator & accessories, 230 V,1400mm sweep, minimum air delivery 245 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) including writing of MES number (Black, Roman, Italic or Indian) n. exc 30cm height complete all as specified and directed.
S&F 1X10 watt LED retrofit type bulk head fitting luminaries, die cast, aluminium alloy body, heat resistant, prismatic glass cover with specially designed gasket, lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 HZ complete all as specified and directed.
S&F energy efficient LED Security light fitting of 25W, pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/ roadway luminaire, with driver including electric connection, complete fitting with all accessories on and including bracket of 32mm dia,light grade ,GI pipe ,1.20 m and connecting with twin core twisted flexible copper conductor cable 1.5 Sqmm and with following specifications complete all as specified and directed :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max15%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)
M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, buried directly in ground vertically (depth of pit not less than 2.25m below normal ground level), with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to electrical equipment/GOD/LA and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI medium grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of precast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Schedule Part-I (2009), complete all as specified and directed. Note(s):- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with TMT bar 8mm dia both ways @100c/c. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt. (v) Quoted lump sum / rate shall be inclusive of above all provisions.
Supplying and fixing and commissioning of electric water heater (Gyser) storage type ABS body of capacity 25 ltrs, BEE appreoved 5 star rating, 230V,single Phase, AC supply inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined quoting complete with all accessories such as safety valve thermostate NRV, connection piece PVC connection for hot and cold water 3 core PVC insulated PVC sheated copper conductor flexible cable including 15 Amp plug suitable for existing socket and fixing material, 04 Nos nut bolt grouting in wall in PCC(1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed .
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete including taking out old cable & bricks all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 10 Sqmm, 2 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete including taking out old cable & bricks all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.
M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.
Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.
S&F in repair GI pipe, light grade, 40mm bore, for cable protection, fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed. Note : (i) Excavation and earth work shall be measured and paid separately.
S&F Galvanised steeI tubing,25mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .
Supply, installation, testing and commissioning of desert cooler electric driven (single phase) having nominal air flow capacity of 6000 CuM Per hour (or nearest size) in steel body made out of hot dip galvanised steel plain sheet thickness 1mm body and 1mm thick removable sides and back panels, single phase 230 volts of exhaust fan size 450mm sweep with submersible pump of suitable size / capacity (ISI marked) (maximum power consumption 250 Volts), PVC grills, conecting copper cable with three pin top, length not less than 2.0 m, PVC connecting pipe of suitable length, BEE approved, conforming to trade pattern including 15mm bore float valve & PVC connection, leakage proof joints and copper cable of suitable size for making electric connections complete all as specified and directed complete all as specified and directed .
Supply, fixing and testing aesthetically designed LED flood light luminiareis of 70 Watts system wattage for energy saving having IP 65/66 degree of protection,with minimum system efficiency as>85%,made of pressure die casting aluminum housing, power coated in graphite grey and heat resistant toughened glass with excellent thermal management and prismatic polycarbonate covers for ensuring efficient optics and uniform distribution of light fitting should have operating voltage range of 150-270 VAC,THD<20%,P.F>.95 and fitting should have in built surge protector of 5 KV and CRI>70 with CCT 5700 K complete all as specified and directed.
Supply and fixing PVC insulated stranded aluminium conductor cable, PVC sheathed, 2x2.5 sqmm +1x1.5 sqmm, flat or circular drawn in and including PVC heavy duty conduit of size 25 mm bore fixed to poles with suitable size clamps for connection of street light fitting from junction boxes complete all as specified and directed.
S&F Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 4 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 4 Sqmm for continous earth wire drawn into and including PVC concealed conduit of suitable size complete all as specified and directed . Note :- Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor & conduit with accessories shall be measured as one length)
Supply, install, testing and commissioining of hi wall split units indoor/outdoor Air conditioner (3 STAR RATING), heating and cooling type complete with cordless remote control unit and with in built air ioniser and plazma filter for better indoor air quality. Electric driven single phase 230 volts, AC, 50HZ, R-32 refrigerent and Digital Inverter twin rotary of capacity 2.0 Ton, including copper piping of adeuate size and required length as directed duly insulated with suitable insulating material e.g. glass wool, plywood, moulded thermocoal etc complete with steel bracket with necessary fittings for condensing unit and copper cable of suitable size for making electric connections complete all as specified and directed. Note:-Bidder has to furnish a replacement warranty of 05 years for AC from the date of completion of CA
S&F Socket Residual Current Device (SRCD) with steel enclosure including MCB,SPN 20 Amps,240 V, AC supply & plug top complete all as specified and directed. Havells Cat Part No DHDDCDP025202003 or equivalent in Makes as specified in PS. Note :- A Sum of Rs. 8707.00 will be deducted on account of credit for dismantling/ demolished/taking down material. Please refer detail on srl page No 33 (Schedule of credit) of Tender Documents.
BANSAL BUILDERS
NEW AMRITSAR CONSTRUCTION COMPANY
BANSI CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .