Renovation and restoration works to ArultharumAnandavalliSametha SivakoluntheeswararTemple melakoil

Amount

Providing Scaffolding for Gopurams with Casurina posts,Coconut or palm trees wherever necessary for main form work and covered with non inflammable shadow net made in Polimer / Plastic etc complete for Vimanam up to 15 feet height

Ornamental Brick work in LM 1:2 (one lime and two sand) using best quality country bricks of size 8 3/4" 4 1/4"x 2 1/4" for all Varivargams,moulds,sthambams, Mukapathrams,Koodu,Nasi and all Ornamental works complete all pancharams agaris,Karnakoodus etc.,upto 15 feet. Data for 100 cft

Providing Vargapoochu over the core walls of Rajagopurams / Vimanams with in LM 1:1.5 (one lime and one and half sand) complete including shaping the Mugapathrams, Mahanasi, Koodu, all Ornamental works to proper shape upto 15 feet. Data for 100 Sft

Providing New Sudhai Vigrahams in the Vimanams and Rajagopurams with Galvanised Iron Rod reinforcement of suitable dia with binding wire wherever necessary shaping the core with broken bricks set in C.M. 1:3 fininshing the same with C.M.1:3, bringing to the correct shape (Lakshana) in confirmity with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayamtheervai wherever necessary, inclusive of cost and conveyance of all materials, such as cement broken bricks, sand, G.I.rods, binding wire, all labour for working in heights , curing lifting of materials etc., complete including Panchavarna Painting 3 coats (Each Vigraham is accountable with One Head, Four Handas, with weapons, Ornamental costumes etc., as per Prathima Lakshana, Vigraham height is measurable from the crown top to the bottom of foot only. If Peedam is provided the rate with Peedam may be adopted as detailed here under) Sudhai Vigrahams of size above 1' 6" and Upto 2' 6"

Painting with multicolour ( Panchavarnam ) paint complete for the Gopuram including cost and conveyance of materials and brushes,labour charges including artist painter,working in heights,lifting of all materials etc.,complete including all extra for foldings upto 15 feet

Painting with Single colour (Ega Varnam) using Water Based Emulsion paint of approved colour and quality complete for Gopuram and Vimanam of following heights including cost and conveyance of materials and brushes,labour charges including artist painter,working in heights,lifting of all materials etc.,complete including all extra for foldings.Gopuram height upto 100 feet (Excluding Kalkaram)

Plastering over the inner core walls of Rajagopurams with in lime Mortar 1:1.5 (one of lime, and one and half of sand)20mm thick , complete including shaping the Mugapathrams, Mahanasi, Koodu, all Ornamental works to proper shape etc. complete for Gopuram height upto 100 feet (Excluding Kalkaram)

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls stone masonry work in cement mortar

Dismantling the Weathering course and pressed tiles clearing away from the site etc.,complete.

Dismantling the Corrugated Iron Sheet Roofing over Pan Tiles without roof as per ss W-0026

Dismantling ms iron materials including stacking the materials as shown by the dept officers all labour charges etc complete

Dismantling the Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

dismantling the Doors and Windows including removal of frames, hinges and fastenings as per ss W-0029

Restoration by providing water wash and appropriate methodology to restore the originalities of the existing Cutstone structures inclusive of necessary scaffolding charges, conveyance and all hire charges for all tools and plants and clearing the site after completion of work etc, complete

Pointing with lime mortar 1:1.5 , 20mm thick including cost and conveyance of all materials into the site and all labour charges etc ccomplete as directed by the departmental officers etc

machine punching for on the existing granite flooring using machine compressor including drilling pit etc including strenghting the weak spot by cement grouting including all matrials and labour charges asper quotation

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface etc., complete complying with standard specification.

Scraping of old plastered surface while white washing,colour washing ,clearing the surface with water, including all working in heights hire charges for special tools, brushes, complete -superficial area including all folds -100 sft

Painting existing iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing zinc cromate priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting existing wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Suplying and fixing for Stainless steel grill 304 for gates and grills and ceiling grills etc as directed including matrial and laobur charges (asper quotation)

Brick work using using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4" in Cement Mortar 1:6 (One cement and six crushed stone sand) including curing neat finishing, etc., complete complying with standard specifiction.

supply and fixing new teak wood temple type door

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supply and run of 35 mm x 200mm powder coated duct with door arrangement complete with MS angle and bolts and nuts complete (Data-A)

Supply and run of ms flat for clamps of Size 2ft x 1ft on stone pillers or beams with suitable bolt and nuts and painting with suitablee colour (Data-B)

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire withpainting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5points / Coil) Higher End (SD-281)

Supply and fixing of single box type 4'20W LED fitting with TW round blocks on wall or ceiling with with PVC unsheathed copper leads from terminals to the fitting (LED fittings should be of Higherend company make like philips/ cromption etc) (Data -C)

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD-535)

Supply and fixing of 2 nos.6A two module 5 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD-466)

Supply and fixing of 1 no 6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End (SD-484)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour (SD-427)

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour (SD-429)

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour (SD-443)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD-598)

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 n. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD-656)

Supply and fixing of 20A DP MCB Switch in suitable 2 pole sheet steel enclosure with earth connection (Data-D)

Supply and fixing of 63A TP MCB Switch in suitable 4 pole sheet steel enclosure with earth connection (Data-E)

Supply and fixing of 63A FP ELCB/ RCCB Switch in suitable 4 pole sheet steel enclosure with earth connection (Data-F)

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete (SD 129)

Supply and clamping of 2 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD-217)

Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection(SD-183)

Supply and clamping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD-223)

Supply and fixing of 8" x 6" PVC synthetic box for cable connection (Data-G)

Supply and run of 1 of No.8 SWG copper conductor on suitable PVC rigid pipe on wall with painting of suitable colour for earth connection (Data -H)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

C.V.T ENTERPRISES