Renovation of Councillor Lobby, Old Meeting Hall for Shifting of Tender Cell along with Renovation of Old Tender Cell at AMC Head Office.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor A. (ii) 6 mm [It - 2 of Page 173]

B. (iv) 12mm

C. (vi) 19mm

Supplying, fitting and fixing boiling water proof block board conforming to IS:1659-1990 conforming to IS:848-1974 of approved make and brand, fitted and fixed as per design as per direction of Engineer-in-charge. [Excluding the cost of supporting frame work and teak wood batten/Lipping]. In Ground Floor (iii) 25 mm [Item no.-4, page-174]

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. A. (i) Thickness of laminate 1.5mm It - 14 of Page 179

B. (ii) Thickness of laminate 1 mm

P.V.C Partition: Supplying,fitting and fixing the partition,frame will be made with rectangular steel tube of size 50mm x 25mm with wall thickness not less than 1.00mm. The vertical members duly welded to the horizontal members shall be placed between 1000mm to 1200mm apart the entire partition frame will be securedly fixed to the wall, ceiling and floor using rawlplug or wooden gutties and screws etc.the frame will be painted with synthetic paint, the section of the partition frame will then fitted with PRINTED LAMINATED P.V.C extruded hollow section of size 100mmx25mm. panel with approved quality fixed in the place by means of P.V.C extruded beading on both sides or P.V.C extruded angles (20mmx18mm) on one side and P.V.C extruded beading (9mmx9mm) on other side ,angle/beading will be fixed to the steel frame by 19mm (nos.6) self tapping steel screw placed at an interval of 450mm and complete in all respect as per direction of Engineer-in- Charge with all labour and materials In ground floor. It - 20 of Page 181

M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine crews. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings & fixtures, scaffolding and labour charges etc. complete) In ground floor It No. 17 of Page 165

Iron parliamentary hinges conforming to IS 362-1982 fitted and fixed complete with steel screws. (e) 100mm. X 125mm. X 27mm. X 2.50mm. It - 6 of Page 141

Renewing iron mortice lock (local best approved quality) 6 lever with handle, connected rods and keys consisting a complete set: (a) With chromium plated handle.

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) It - 5 of Page 204

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) ii) 4 mm thick It - 1 of Page 205

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality It - 4 of Page 201

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. It - 1 of Page 200

Supplying PVC rollers for sliding windows as per direction of Engineer in charge. It - 6 of Page 242

Supplying Maruti Lock (100mm) It - 7 of Page 242

Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. (a) 200 mm long It - 5 of Page 242

Supplying, Fitting & Fixingof Roller blindsexcept white colour which is excellent quality fabric including MS Roller stand with Powder coated & MS channel for blind adjustment, elegance and versatility. On the one hand, theirsimple design with straight lines alows them tocomplement any apace without drawing tomuch attention. They are Ideal especially for the minimalist, classic or industrial designs on the other hand their versatility is menifested mainly in the widevariety of materials and colour in which they can be manufactured with necessary fittings complete in all respect of as specified in the drawings in accordance with the ArchitectsInstructions and as specified design of Architect / EIC. Approved vide W/o No -

ADD GST @ 18%

ADD CESS @ 1%