SPECIAL REPAIR TO TOILET OF ADMIN BUILDING AND SECONDARY BUILDING OF WING A AND WING B OF KV NO 2 AT BELGAVI CANTT UNDER GE BELGAUM

Amount

M&L for Rendering 5mm thick in CM 1:3 as in ceiling surfaces, finished even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed.

M&L for Preparation of new ceiling surfaces and applying three coats of white wash, complete all as specified and as directed.

M&L for Complete removal of existing treatment on old ceiling surfaces and and applying three coats of white wash, with and including preparation of old decorated surfaces of ceiling, complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed.

M&L for applying two coats of Oil Bound Distemper over a coat of primer and a layer of 3mm thick wall care putty on walls with and including preparation of new surfaces of wall, complete all as specified and as directed.

M&L for applying two coats of Oil Bound Distemper over a coat of primer and a layer of 3mm thick wall care putty on walls, with and including complete removal of existing treatment on wall with wire brush, scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots, filling holes & cracks with cement base putty and including preparation of old decorated surfaces of wall, complete all as specified and as directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.

M&L for Premium quality, joint free ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exc 0.18Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified.

M&L for Premium quality, joint free coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc. 0.11 Sq.m. but n. exc. 0.18Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed.

S&F Steel ventilator with top hung shutter with and including hinges, steel peg stay and all fittings, complete all as specified.

M&L for applying two coats of synthetic enamel paint with and including preparation of new steel and steel based surface of any description of size exceeding 10cm width or girth, complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint with and including preparation of old painted steel and steel based surface of any description of size exceeding 10cm width or girth, complete all as specified and as directed.

S&F Minimum 4.0mm thick sheet glass of ordinary quality of approved brand fixed in position with and including glazing with oil putty / wooden beads, glazing clips in doors, ventilators, windows, partitions etc., as in squares exceeding 0.50 Sqm in each pane etc., with all required accessories, complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of area n. exc 1.0Sqm each, complete all as specified and as directed.

Taking down shutters of area exc 1.0Sqm each but n. exc 2.0Sqm each, complete all as specified and as directed.

M&L for Precast reinforced cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in door and windows frames, any size, single or double rebated, with and including arrangement for fixing of hinges, fixtures as required at site and including demolition of existing old u/s cement concrete frames, complete all as specified.

M&L Framed work such as bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats, for securing purlins to wood trusses or rafters; knee piece, inserts; two way and three way straps, plate washers and similar small articles confirming to Fe-290, Gde E-165, complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension rade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant, complete all as directed by Engineer-in-Charge.

S&F 150mm long Extruded aluminium alloy 'D' type handles, fabricated type, anodised complete all as specified and as directed.

S&F 100mm long Extruded aluminium alloy 'D' type handles, fabricated type, anodised complete all as specified and as directed.

S&F MS butt hinges, cold rolled, medium weight 100mm size, ISI marked, complete all as specified and as directed.

S&F MS butt hinges, cold rolled, medium weight 75mm size, ISI marked, complete all as specified and as directed.

S&F Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed.

S&F Aluminium anodised sliding door bolt 250mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 75mm long complete, complete all as specified and as directed.

S&F Floor door stopper of brass body and tongue,anodised,with 150mm long cover plate and hard drawn steel spring, fixed in door, complete all as specified and as directed.

S&F Unplasticised PVC (uPVC) pipe of 15mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.

S&F Unplasticised PVC (uPVC) pipe of 20mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.

S&F Unplasticised PVC (uPVC) pipe of 32mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.

S&F IN REPAIR Gun-metal, globe or gate valves, with iron wheel head, screwed both ends, suitable for iron pipe of 20mm bore, complete all as specified and as directed.

S&F IN REPAIR Vitreous china Wash down water closet pan EWC (Pedestal pattern), white with 'P'or 'S' trap étc, (excluding flushing cistern and flush pipe) including plastic water closet seat cover closed pattern with flat bottom cover, mild steel chromium plated or aluminised hinging device, fixing bolts, etc, complete all as specified and as directed.

S&F IN REPAIR Vitreous china squatting pan, Orissa pattern size 580mm x 440mm white with integral foot rest including 'P' or 'S' trap etc., with and including cement concrete bedding, complete all as specified and as directed.

S&F IN REPAIR Vitreous china wash basin, white, size 550x400mm, including CI brackets, with PVC waste pipe and waste fittings and cutting for and pinning in ends of brackets or erecting stands etc., complete all as specified and as directed.

S&F IN REPAIR PVC Flexible pipe (waste pipe) 32mm bore dia, suitable for 32mm bore waste coupling of sink, WHB, etc., complete all as specified.

S&F IN REPAIR PVC valveless, syphonic action type low level flushing cistern, 10 ltrs capacity, white with inlet ball valve, float and handle soft touch type including brackets, PVC flush pipe, fixed with CP brass screws, complete all as specified and as directed.

S&F IN REPAIR PVC connections 15mm size with PTMT nuts 450mm long, completeall as specified and as directed.

S&F IN REPAIR Stop Valve, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.

S&F IN REPAIR Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.

S&F IN REPAIR 15mm bore chromium plated pillar taps, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F IN REPAIR Brass shower rose of 15mm inlet and 125mm outlet, chromium plated with swivel joint, CP shower arm 300mm long and CP flange of approved make and quality, fixed to 15mm bore dia pipe, complete all as specified and as directed.

S&F IN REPAIR Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, complete all as specified and as directed.

S&F IN REPAIR Brass chromium plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed.

S&F IN REPAIR Health faucet (ABS Body), brass chromium plated with 1m long flexible PVC tube and wall hook complete all as specified and as directed.

S&F IN REPAIR 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc compete all as specified and as directed.

S&F IN REPAIR Soap dish, vitreous china , white of size 160mmx160mmx 90 mm fixed with plugs with chromium plated brass screws, completeall as specified and as directed.

S&F IN REPAIR Tubular towel rod 600mm long, brass chromium plated, fixed to walls with plugs and chromium plated brass screws complete all as specified and as directed.

S&F IN REPAIR uPVC (SWR) Floor / Nahani trap with grating of 75mm dia outlet, setting and jointing with solvent, complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), ISI Marked, three layered, 500 Litres capacity, hoisted and fixed in position all as specified in SSR Part I, with and including 25mm dia PTMT ball valve, with and including taking down & removing existing water tank of any capacity, complete all as specified.

S&F IN REPAIR Vitreous China bowl urinal, flat back, size of 465mm x 355mm x 265mm white (minimum), with and including plugs, 60mm long brass screws, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), bedding urinal against wall with CM 1:2 and pointing urinal back with white cement, complete all as specified.

S&F IN REPAIR 110mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, laid under trenches or laid under floor, complete all as specified and as directed.

S&F IN REPAIR 75mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, laid under trenches or laid under floor, complete all as specified and as directed.

S&F IN REPAIR 110mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed.

S&F IN REPAIR 75mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed.

S&F uPVC (SWR) Branch Piece, Single Y, equal or unequal with access door, suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed.

S&F uPVC (SWR) Branch Piece, Double Y, equal or unequal with access door, suitable for 75mm bore pipes, including jointing with solvent, complete all as specified and as directed.

S&F uPVC (SWR) Vent Cowl suitable for 75mm bore pipes, including jointing with solvent, complete all as specified and as directed.

S&F uPVC (SWR) bend any radius with access door, suitable for 75mm bore pipes, including jointing with solvent, complete all as specified and as directed.

S&F uPVC (SWR) bend any radius with access door, suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed.

S&F uPVC (SWR) Junction, Single T, equal or unequal with access door, suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed.

M&L for sunken floor water proofing treatment including complete removal of old treatment, removal of debris out side MD land and applying new treatment as under:- (a) Removing existing sunken floor treatment & cleaning by using wire brush [Mechanical / hand brush] the sunken / lowered portion of RCC Slab for full depth of sunken by wire brush, chisel out any mortar sticking. (b) Preparation of sunken floor & wall surface by brushing with a neat cement slurry @ 3Kg/SqM and applying 10mm thick plaster with CM (1:3) mixed with WPC@3% by weight of cement. (c) Applying FOSROC Nitoproof 600PF (minimum 0.8mm dft) over a priming coat of Nitoproof WB Primer or equivalent product of any make specified here in after, applied as per manufacturer’s instructions to bottom and full vertical sides of sunken floors. (d) Fill it with water & check for dampness & seepage. In case the slightest indication of seepage / leakage is noticed the same shall be rectified by injection grouting to seal all cracks by application of polymer modified mortar FOSROC Nitobond SBR or equivalent mixed with Integral WPC to seal all cracks & micro cracks if any. (e) Finally Apply additional coat of FOSROC Nitoproof 600PF or equivalent & sealing all junction points with epoxy cement mortar and S&F 25mm bore GI pipe leakage spouts projecting 100mm from external face of wall, complete all as directed by Engineer-in-Charge. Note: WPC shall be measured and paid separately.

M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed.

S&F Machine cut Mirror Polished Granite stone 20-25mm thick (of any type), table rubbed & polished, as in urinal partitions (both side polish), skirting, dado, steps, window cills, cooking platform and the like, laid over and including 20mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and mirror polishing, complete all as specified and as directed.

S&F IN REPAIR 15mm bore dia, Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed, complete all as specified.

Cutting holes of not exc 150SqCM into or through Stone walls of exc one brick but not exc two brick wall thick built in lime / mud mortar, and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified.

Cutting chases for concealed water tubing and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, cutting not exc 10cm girth in brick wall, complete all as specified.

Taking down & refixing old serviceable steel water tubes of size 15 to 20mm bore dia any grade, fixed to walls / ceiling or laying in floors etc., including cleaning, complete all as specified.

S&F Mild Steel Silver Wall Hanger, powder coated type with 06 No of Hooks and minimum size 12 inch x1 inch, fixed to wall with suitable screws, complete all as specified.

M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and including PVC concealed rigid conduit (minimum 20mm) medium grade ISI marked, with accessories, junction boxes, tees, with and including factory made GI boxes with modular top cover plates with frame for switches / sockets etc., including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch/MCB, with and including taking down existing u/s point wiring of any type, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate.

All as per Serial Item No. 70 here-in-before but for 3 pin 5/6Amp switch socket point, on same board, complete all as specified.

All as per Serial Item No. 70 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified.

All as per Serial Item No. 70 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified.

S&F Modular switch 1 way 5/6Amp, 1 Module, 240 Volts, complete all as specified and as directed.

S&F Modular switch 1 way 15/16A, 1 Module, 240 Volts, complete all as specified and as directed.

S&F Modular Socket, 5/6A, 2/3 pin combined , 2 module, 240 Volts, complete all as specified and as directed.

S&F Modular Socket, 6A/16A, 2/3 pin combined multipurpose, 2 module, 240 Volts, complete all as specified and as directed.

S&F Ceiling rose, 3 terminals PVC/Polycarbonate, 3 phase, isolated body, complete all as specified and as directed.

S&F BLDC Modular Fan regulator, 240Volt, 120 watt electronic step & socket type regulator, 2 Module, for ceiling fan of any sweep, complete all as specified.

M&L for Circuit / Sub main wiring with two runs of 4.0Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 4.0Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 25mm dia), concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit.

M&L for Circuit / Sub main wiring with two runs of 6.0Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 6.0Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 25mm dia), concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit.

S&F Exhaust fan, steel body, AC single phase, 230Volt, 300mm sweep, heavy duty with blades, frame, louvers, wire mesh with all accessories and fixed with and including 12mm thick plywood cut to shape required at site, necessary fixing details, including taking down existing u/s exhaust fan and depositing to AGE E/M Store yard, complete all as specified and as directed.

S&F Ceiling fan complete with blades, down rod, 3 blade type, suitable for regulator operation and accessories, 230Volt, 1200mm sweep, minimum air delivery 210 CFM with service value 6.0BEE, with brushless direct current motor (BLDC), five star rating, including taking down existing u/s ceiling fan and depositing to AGE E/M Store yard, complete all as specified and as directed.

S&F Industrial Luminaries batten type fitting 1X20watt, 220Volt, >100 lum/W, PF>0.95, AC, integrated type batten and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, with and including taking down existing old u/s light fitting of any type, complete all as specified. Make: Cat No. CCS-100-20-65-HL2-DP-NWH of Crompton or Equivalent make as specified here -in-after.

S&F LED Industrial Luminaries batten type fitting 1X10watt, 220Volt, >100 lum/W, PF>0.95, AC, integrated type batten, aluminium housing with polycarbonate diffuser LED's as light source and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, with and including taking down existing old u/s light fitting of any type, complete all as specified. Make: Cat No. CCS-103-10-65-SL-DP-NWH of Crompton or Equivalent make as specified here -in-after.

S&F IN REPAIR factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) as outgoings, complete all as specified.

S&F IN REPAIR MCCB, 3pole, 100Amps, 415Volts, thermal magnetic, Ics=100% Icu, 16kA current rating conforming to IEC-60947-II along with spreader incl Phase Barreir to be fixed in distribution board, complete all as specified.

S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 415 volt, 12Way, double door, IP-42 protection with 200 Amp rated copper bus bar 415Volt, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified.

S&F IN REPAIR MCB SPN 40 to 63Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed.

S&F IN REPAIR MCB SP 10 to 32Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed.

M&L for IN REPAIR Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

Sadhana Constructions & suppliers (BID ID -3392362)

AARADHYA ENTERPRISES (BID ID -3400960)

M/S MAHADEV M PATIL (BID ID -3398775)

M/s B C CHOUGULE (BID ID -3391647)

SHREESAMARTH CONSTRUCTION (BID ID -3391148)

ASHIRWAD ELECTRICALS (BID ID -3402055)

M/s. N D KALING (BID ID -3403935)

RAJARAM TAYAPPA DANDAGALKAR (BID ID -3403217)

ASHOK M RAJGOLKAR (BID ID -3392706)

M/s. KIRAN M CHOUGULE (BID ID -3400052)

DHANSHRI ENTERPRISES (BID ID -3394314)

M/s PRATAP VIJAYSINGHRAO DESAI (BID ID -3401994)