Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.6 LAccepted-AOC SHASWTA CITY PUPUNKI KALA PATHAR CHAS BOKARO JHARKHAND INDIA 827013 | BOKARO | JHARKHAND | 827013 | ₹11.6 L Quoted ₹9.9 L | L1 | Accepted-AOC L1 bidder is techno commercial qualified. |
| 2 | L2₹10.1 LRejected-AOC 268 KARGALI BAZAR BERMO BOKARO 829104 JHARKHAND | BOKARO | JHARKHAND | 829104 | ₹10.1 L | L2 | Rejected-AOC Bidder not qualified in financial evaluations. |
| 3 | Rejected-Technical | - | - | Rejected-Technical Reject |
| Sl No | Description | Qty | Unit | M/S CHIRAG ENTERPRISES L1 | M/s Kiran Electrical works L2 |
|---|---|---|---|---|---|
| 1.00 | PART-A-REPAIRING OF 324KW/435 HP ,3.3KV 1490 RPM GEC MAKE INDUCTION MOTOR ATTACHED WITH 2000 GPM PUMP UNDER AADOCM DHORI AREA. | 1 | nos | - | - |
| 2.00 | Cooling fan new making as per sample with casting, machining, drilling, tapping, new hub making and tightening with key ways, cutting alignment and balancing on lathe machine with material. | 1 | NOS | 15,500 ₹15,500 | 16,000 ₹16,000 |
| 3.00 | Rotor and rotor shaft alignment checking on lathe machine and rectification and its alignment setting by cut machining and polishing by stone file and complete balance checking. | 1 | JOB | 21,000 ₹21,000 | 21,000 ₹21,000 |
| 4.00 | End cover housing repairing by C.I electrode welding and machining as per bearing size. | 2 | JOB | 14,750 ₹29,500 | 15,000 ₹30,000 |
| 5.00 | Gas heating and cutting grinding etc. work of both end connection points strip bars for old damage bar dismantling from rotor. | 60 | NOS | 500 ₹30,000 | 500 ₹30,000 |
| 6.00 | Rotor shaft bearing housing repairing electrode welding on bearing fitting place or sleeve making as per bearing size. | 2 | JOB | 19,000 ₹38,000 | 20,000 ₹40,000 |
| 7.00 | Complete motor set dismantling, after repairing work its complete assembling/commissioning with testing, cheking charge | 1 | JOB | 19,000 ₹19,000 | 20,000 ₹20,000 |
| 8.00 | Repairing and setting of terminal box and new making of its cover by iron sheet. | 2 | NOS | 12,500 ₹25,000 | 12,500 ₹25,000 |
| 9.00 | Complete motor coil cleaning ,after cleaning its varnishing/heating,tapping etc. | 1 | JOB | 21,000 ₹21,000 | 21,000 ₹21,000 |
| 10.00 | After repairing and changing of strip bars complete new brazing of both end points by gas heating ,si;lver rod brazing and copper bars shape making of rotor strip bars ,after this bars fixing in same slots. | 60 | NOS | 1,150 ₹69,000 | 1,250 ₹75,000 |
Tender Value
Refer Docs
EMD Value
₹13,300
Closing Date
5 Sept 2025, 1:00 pmClosed
staff officer E n M
office of the staff officer E n M
Repairing and maintenance of 02 no 3.3 kv HT 324KW and 168KW motor and 01 no 440V LT 160 KW motor installed at AADOCM Dhori Area
2025_CCL_342073_6
GM(D)/SO(EnM)/NIT/2025-26/13 Dtd- 21.08.2025
Open Tender
Electrical and Maintenance Works
20 days
AADOCM
Please refer tender documents
2 documents required · 2 mandatory
₹13,300
11 Mar 2026
23 Aug 2025
6 Sept 2025
23 Aug 2025
5 Sept 2025
23 Aug 2025
23 Aug 2025 - 26 Aug 2025
Amount
PART-A-REPAIRING OF 324KW/435 HP ,3.3KV 1490 RPM GEC MAKE INDUCTION MOTOR ATTACHED WITH 2000 GPM PUMP UNDER AADOCM DHORI AREA.
Cooling fan new making as per sample with casting, machining, drilling, tapping, new hub making and tightening with key ways, cutting alignment and balancing on lathe machine with material.
Rotor and rotor shaft alignment checking on lathe machine and rectification and its alignment setting by cut machining and polishing by stone file and complete balance checking.
End cover housing repairing by C.I electrode welding and machining as per bearing size.
Gas heating and cutting grinding etc. work of both end connection points strip bars for old damage bar dismantling from rotor.
Rotor shaft bearing housing repairing electrode welding on bearing fitting place or sleeve making as per bearing size.
Complete motor set dismantling, after repairing work its complete assembling/commissioning with testing, cheking charge
Repairing and setting of terminal box and new making of its cover by iron sheet.
Complete motor coil cleaning ,after cleaning its varnishing/heating,tapping etc.
After repairing and changing of strip bars complete new brazing of both end points by gas heating ,si;lver rod brazing and copper bars shape making of rotor strip bars ,after this bars fixing in same slots.
Damage bearing of drive and non drive end removing by puller and gas heating and then new bearing fitting.
Providing and fixing of drive END BEARING NO. NU321 ECJ/C3
Providing and fixing of drive NON-END BEARING NO. 6321 -C3
Coil moulding charges
PART-B-REPAIRING OF 168KW/225 HP ,3.3KV 1485 RPM GEC MAKE INDUCTION MOTOR ATTACHED WITH 1000 GPM PUMP UNDER AADOCM DHORI AREA.
Cooling fan new making as per sample with casting, machining, drilling, tapping, new hub making and tightening with key ways, cutting alignment and balancing on lathe machine with material.
Rotor and rotor shaft alignment checking on lathe machine and rectification and its alignment setting by cut machining and polishing by stone file and complete balance checking.
End cover housing repairing by C.I electrode welding and machining as per bearing size.
Gas heating and cutting grinding etc. work of both end connection points strip bars for old damage bar dismantling from rotor.
Rotor shaft bearing housing repairing electrode welding on bearing fitting place or sleeve making as per bearing size.
Complete motor set dismantling, after repairing work its complete assembling/commissioning with testing, cheking charge
Repairing and setting of terminal box and new making of its cover by iron sheet.
Complete motor coil cleaning ,after cleaning its varnishing/heating,tapping etc.
After repairing and changing of strip bars complete new brazing of both end points by gas heating ,si;lver rod brazing and copper bars shape making of rotor strip bars ,after this bars fixing in same slots.
Damage bearing of drive and non drive end removing by puller and gas heating and then new bearing fitting.
Providing and fixing of drive END BEARING NO. N324 ECJ/C3
Providing and fixing of drive NON-END BEARING NO. 6321-C3
PART-C-REPAIRING AND MAINTENANCE OF 160KW/220HP,440V,1485 RPM,INDUCTION MOTOR ATTACHED WITH 500 GPM PUMP UNDER AADOCM DHORI AREA.
INDUCTION MOTOR COMPLETE OPENING/DISMANTLING.
ROTOR SHAFT BEARING HOUSING REPAIRING ELECTRODE WELDING ON BEARING FITTING PLACE OR SLEEVE MAKING AS PER BEARING SIZE.
CLEANING REPAIRING AND RESETTING OF ROTOR BAR BY BRAZING WITH ROPOTON ROD AT BOTH ENDS.
COMPLETE MOTOR SET FITTING THEN TESTING AND COMMISSIONING.
END COVER HOUSING REPAIRING BY CI ELECTRODE WELDING AND MACHINING AS PER BEARING SIZE.
Damage bearing of drive and non drive removing by puller gas heating and then new bearing fitting.
Providing and fixing of drive END BEARING NO. NU 319 ECJ/C3
Providing and fixing of drive NON-END BEARING NO. 6319-C3
SUPERVISION,INCIDENTAL& OVERHEAD EXPENSES(A+B+C)
Total impact of GST for the purpose of CTC
M/s Kiran Electrical works (BID ID -1180703)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid