Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹46.4 L
EMD Value
₹1.1 L
Closing Date
7 Jan 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Krishna Bhagya Jala Nigam Limited
Mallikarjun Madani
AME of Head work of Mallabad Lift Irrigation Scheme under Lift-1 for the year 2024-25(Maintenance Charges).
KBJNL/2024-25/HL/WORK_INDENT1362/CALL-2
KBJNL/2024-25/HL/WORK_INDENT1362/CALL-2
Open
Head works for lift irrigation schemes
Two Tender Document System(Two Cover)
KBJNL Division JBC Division No 3 Chigarahalli
11 documents required · 11 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
Bidder should have satisfactorily completed at least one similar nature of work such as Operation and maintenance of Lift Head work or Pump house (Consisting of VT pump sets with allied equipments at not less than 56.08 m head at 744 rpm coupled with 1125 KW, 6.6KV volts motors 4nos. 11 or 33 KV / 6.6 KV substations with at least 6.3 MVA transformers along with allied equipments.) of value not less than Rs.27.50 Lakhs (50% of the amount put to tender during the last 5 years i.e. 2019-20 to 2023-24)(The certificate should be issued by an officer not below the rank of Executive Engineer of the concerned Division / Equivalent officer and countersigned by the Superintending Engineer of the concerned Circle / next higher officer) (The work done of previous years shall be updated to 2023-24 at 10% per annum
Bidder should have following minimum qualified Engineers Electrical /Mechanical/Technicians having minimum 5 years experience in operation & maintenance of pumping stations either in water supply/irrigation works. Separate staff shall be available for operation and separate staff for minor repairs & maintenance.
A copy of the valid CEIG approved Class-I Electrical Contractor & above
Liquid assets and /or availability of credit facilities of not less than Rs.15.00 lakhs. (Credit lines/ letter of credit/ Certificates from Banks )for meeting the fund requirement etc
To qualify for award of this contract, each tenderer in his name should have in the last five years Period (2019-20,2020-21,2021-22, 2022-23 & 2023-24).Achieved in at least two financial years an average annual financial turnover(in all classes of civil engineering construction works only) of Rs. 54.80 Lakhs (usually not less than the estimated cost under this contract) (upload scan copy of audit report and originals should be produced while opening the tender
Copy of GST Registration Certificate, along with copy of GST return for at least last 3 years i.e 2021-22, 2022-23 & 2023-24.
A copy of the valid Employees Provident Fund (EPF) registration Certificate along with paid E.P.F. challans, Form Via & ECR (Electronic Challan cum return) for minimum of 20 nos. man power for minimum of 3 years during last 5 years i.e.2019-20 to 2023-24.
A copy of Employee Insurance registration certificate (ESI) along with form 5 returns of contribution and for 3 years of ESI contribution for minimum of 20 nos. man power during last 5 years i.e., 2019-20 to 2023-24
Intending bidder should furnish a valid registration certificate in labour department .
₹1,170
₹1.1 L
31 Dec 2024
31 Dec 2024
9 Jan 2025
4 Jan 2025
AME of Head work of Mallabad Lift Irrigation Scheme under Lift-1 for the year 2024-25(Maintenance Charges).
Engineer- Grade-II DIPLOMA Mechanical for Mallabad Lift Irrigation Scheme under Lift-1 Works for over all supervision Operation and Maintanance of Pump Houses and 33/6.6 KV Sub-Stations as per directi...
Engineer- Grade-II DIPLOMA Electrical for Mallabad Lift Irrigation Scheme under Lift-1for over all supervision Operation and Maintanance of Pump Houses and 33/6.6 KV Sub-Stations as per directions of ...
Pump Operators- ITI/ITC/JOC/WIREMAN for Mallabad Lift Irrigation Scheme under Lift-1 for over all supervision, Operation and Maintanance of Pump Houses and 33/6.6 KV Sub-Stationas as per directions of...
HEAVY Mazdoors for cleaning of Pump Houses and 33/6.6 KV Sub-Station at Mallabad Lift Irrigation Scheme under Lift-1 as per directions of Engineer-in-Charge
Watchmen for security of Mallabad Lift Irrigation Scheme under Lift-1 for security and surveilance of Pump Houses and 33/6.6 KV Sub-Stations as per directions of Engineer-in-Charge.
EHV Grade Transformer Oil - New as per directions of Engineer-in-Charge.
Static/Digital/Numerical Differential Relay for Transformer protection for SAS Station - IEC61850 compatible as per directions of Engineer-in-Charge
Wiring of Transformer marshalling box, bucholtz relay, fixing thermometer, OLTC upto control panel and assisting in testing and commissioning by RT/MT/Firm Engineers For 5 MVA to 6.3/8 MVA Tr.as per d...
Inspection of wires and ferrules.Inspection of wiring of protective devices, cooling fans, oil flow pumps, OLTC, RTCC, bushing etc., as per directions of Engineer-in-Charge.
1. Ratio Test 2. SC Test 3. Excitation Current Test/ Highpot Test 4. Magnetic Balance Test 5. Vector Group Test 6. Induced High Voltage Test 7. OLTC Operation - Local and Remote
8. Protectiv...
Assisting in Testing and Commissioning of Current Transformer as per directions of Engineer-in-Charge.
Testing of C&R panels:Testing for insulation level, testing of relays, control operations for closing tripping etc., interlock. Alarm annunciation & indicationchecks (without SAS) as per directions of...
i) Fixing of Boost Voltage level ii) Fixing of Float Voltage level
iii) Fixing of Trickle Voltage level iv) Testing of alarm, indication and load ckts, auto/manual change overs etc.,
Filling of oil to the main tank and OLTC tank, filtering the oil including filtering till attainment of prescribed BDV valves
including labour, filtering equipment along with accessories. as per direc...
Work of overhauling and servicing and repairing of southern switch gear make breakers of motor as specified below: Lowering the breaker from the panel after isolating the supply, draw out the breaker ...
Work of repair, overhauling & servicing of southern switch gear breakers of capacitor bank as specified below: Lowering the breaker from the panel after isolating the supply, draw out the breaker truc...
Working of repairing and overhauling of upto 800amps as specified below: Complete dismantling of breaker units of upto 800 amps breaker of filter house taking out the fixed and moving contacts of all ...
Work of repairing and overhauling of upto 400 amps LT breaker bus coupler as specified below: Complete dismantling of breaker units of 400 amps, breaker of compressor room taking out the fixed and mov...
Lightning Arrester 30 kV 10kA Lightning Arrester Normal Duty polymeric Discharge Class -2 as per directions of Engineer-in-Charge.
Rubber Hand gloves 15 kV, SEAMLESS Confirming to
ISS (Sample to be verified for seamless before approval)
for electrical purpose as per directions of Engineer-in-Charge.
Erection of Lightning Arrestor and wiring including movement
from the point of unloading to the point of erection.
Insulation resistance test, leakage current test, surge
counter operation test as per...
Grease GEM-RR3 as per directions of Engineer-in-Charge.
Master Trip Relay suitable for C&R panels at 110 kV and 66 kV Stations as per directions of Engineer-in-Charge
Trip Circuit Supervision Relay suitable for C&R panels
at 110 kV and 66 kV Stations as per directions of Engineer-in-Charge.
Cotton Waste as per directions of Engineer-in-Charge.
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter
on existing panel/wood board as per directions of Engineer-in-Charge.
Supplying, fixing and wiring 0 to 1500A CT operated AC analog typeAmmeter without CT as per directions of Engineer-in-Charge
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...
Supplying and fixing of LED type panel board indicating lamp
with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.as per directions of Engineer-in-Charge
Supplying and fixing Microprocessor based Electronic timer (withoutcontactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.as per directions of Engineer-in-Charge
Supply and fixing of Auxiliary contactor relay with 2 NO and 2
NC contact and operating coil voltage of 220V to 260V. fixed on
existing wood/panel board using necessary bolts, nuts,
washers and wiring...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Supply and delivery at site of brand new best make pressure gaugebourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 100 mm.as per directions of Engineer-in-Charge.
Removing white wash or colour wash by steel brushing and / or scraping,sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per ...
Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Removing the old paint from steel and / or other metal surface with hand scraping and making surface even including cost of labour, complete as per specifications.as per directions of Engineer-in-Char...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge...
Galvanised wire mesh of average width of aperture 1.4 mm and nominaldia of wire 0.63 mm as per directions of Engineer-in-Charge.
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Smart Surveillance System (CCTV): using PTZ & Fixed cameras, OFC monitoring system, HMI etc., as per specification PTZ Camera Specification: Lens type: Auto focus with Optical Zoom of 30x, Digital Zoo...
Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of panels of suitable height with vertical trash bars welded to structural steel rame at wider interval an...
Lubricant oil for motors.as per directions of Engineer-in-Charge.
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical Lift Gate (with top seal) consisting of skin plate, stiffners, horizontal and vertical girder, wheels, gui...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, gate groove liners with all accessories for canal escape / reg...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Notification.pdf
Others - NOTIFICATION • 0.39 MB
DTP 1362.doc
Others - DTP • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .