REPAIR TO JOINERY ,FLOORING, PLASTER, PLUMBING AND CIVIL WORK

Amount

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc.

M&L for Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete.

-Ditto- all as per Srl item No. 2 here-in-before, but except bricks.

M&L foBrick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete .

-Ditto- all as per Srl item No. 6 here-in-before, but 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound (supply only of W P C shall be measured and paid separately).

M&L for Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust, etc

Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M&L for non skid cramic tiles colured of size area of each tile exc. 0.18 sqm but not exc 0.18 sqm but not exc 0.38 sqm 7 to 8 mm thick in flooor etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed

M&L for non skid cramic tiles colured of size area of each tile exc. 0.18 sqm but not exc 0.18 sqm but not exc 0.38 sqm 7 to 8 mm thick inskriting ok dado jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete.

M & L Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete for tiling .

M&L for glazed ceramic tiles coloured digital with highlighter and approved design and pattern by G E of size 450x300 x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles, complete all as specified and directed

M & L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete.

M&L for screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for non skid-ceramic tiles coloured of size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 7mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match complete all as specified and directed

M & L Over halling of steel rolling shutter with bevel gear box of size not exc. 9.00 sqm each including taking down and refixing in same opeing, greasing, oiling and miscellaneous repairs,welding etc and chaning of unserviceable items required at site complete all as specification and dircted. (unserviceable items shall be paid separtaly)

Supply only ball bearing for steel rolling shutter as per site requriment for existing rolling shutters.

S & F Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete.

S & F Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. complete with fixing bolts and MS chromium plated flush pipe, 32mm dia for low level flushing cistern, plastic water closet seat, coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and jointing complete as fixed in repair.

S & F Plastic water closet seat covers, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete fixed in repair.

Supply & fixing in repair Jet spray for water closet pan pedestal pattern in repair.

S & F in repairs PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs complete all as specified and directed.

S & F in repairs Vitreous china wash basin, white, flat back, size 550x400mm including waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc. complete all as specified and directed.

S & F in repairs Sink with drainage board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410 mm x 330mm x 160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 900 x 600 mm of best quality of approved make .

S&F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete.

S&F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete.

M & L 32 mm bore waste fittings, brass, chromium plated for galzed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete.

S&Fixed in repair PVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.

M&L for Stainless steel gratings 100mm bore size fixed with cement motar.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete.

-Ditto- all as per item No. 37 here- in- before but 20 mm bore.

15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete.

-Ditto- all as per item No 39 here in before but 20mm bore.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed.

-Ditto- all as per item No.41 here- in- before but 20 mm bore.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete.

-Ditto- all as per item No.43 here- in- before but 20 mm bore.

Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed in repair.

Swivel shower of PTMT any colour for fixing with 15 mm pipe (minimum weight 40 gm), supplied and fixed in repairs complete.

S & F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete.

S & F Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete.

-Ditto- all as per Srl item No.49 here-in-before, but area exceeding 1.5 sqm and not exceeding 4.00 sqm each

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete.

Taking down chokhat or frame shutters of any description, area not exceeding 1 sqm each complete.

Taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware fittings complete.

------Ditto--------- but without taking down of shutter

S & F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete.

All as per item No 55 here-in-before but of size 125 x 60 mm

M&L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete.

M&L for 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete.

35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete.

S&F 35 mm thick factory made flush shutter, solid core construction with particle board core and ply wood face panels commecial type on both sides

S&F for Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified and as directed

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified and as directed

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site for cupboard etc as per specification & drawing

M&L for cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 filling etc. complete all as specified.

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete ®

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified

S&F 18 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work including external fixing of teak wood lipping 6 mm thick with nails and french polishing to teak wood lipping

S & F Ist class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each complete.

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete.

S&F aluminium handles extruded type of size 125mm, complete all as specified and directed.

S & F 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete.

S&F mild steel sliding door bolt bolt type stove enamelled black with bright bolt not less than 12mm dia with & including a minimum 6 bolts & nuts fixed on plate & two on stapple plate fixed at size 300 mm , complete all as specified and directed.

S&F fixed 100mm hasp and staple mild steel safety type stove enamelled black including bolt to hinge plate and fixed with screw 150mm long.

S & F Door closer of aluminium (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete.

S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete.

S&Fixed in repair of stainless steel wire cloth 0.36mm nominal dia of wire & width of aperatue 1.40mm & fixed with tinned tuchs or galavanised with stipler.complete all as specified and directed.

S & F Galvanized mild steel wire-cloth in repair 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete .

M & L for Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete.

S&Fixed in repair of continuous plano hinges mild steel bright finish or electro galvanised for 30mm thickness.

S&F in repair coloured powder coated Darpery Rod of aluminum 25mm inner dia With suppored on coloured powder coated aluminum decorative type designe and pattern approved by GE, brackets both ends complete all as specified . Make :- Vista or equivelent

S & F in repair, 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete.

M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on walls complete all as specified and directed.

M&L for Preparation of old decorated surfaces of ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceiling complete all as specified and directed.

M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of oil emulsion distemper all as specified and directed.

M&L for Preparing old treated surfaces of walls (plastered or unplastered surfaces) and applying one coat of cement base paint.

S&Fixed in repair of looking mirror 5mm thick of best quality fixed over 6mm thick plywood & PVC or wooden bead on all arround with hangings arrangement complete.

S&F in repair PVC Mirror cabinet of size 0.45x 0.30m with doorshutter complete all as specified .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete.

S&F 3mm plain sheet glass ordinary quality and glazing with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane (Beads shall be measured and paid separately) complete all as specified and directed.

All as per item No 90 above but 4mm thick glass pane fixed in for cupboard and self in repairs.including rollar /wheel for sliding complete all as specified and directed .

M&L for grinding and polishing of cxisting terrozo cast in situ floor with two cut on polishing including cleaning complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors of 110mm bore inculding cutting out wall /concrete and finishing of surface to match existing surface .

S&F in repair PVC (SWR) pipe bend door of 110mm bore with access door inculding cutting out wall /concrete and finishing of surface to match existing surface .

S&F in repair PVC(SWR) P trap 125/110 mm bore including cutting out wall /concrete and finishing of surface to match existing surface .

M&L for welding in repairs hinges , handle , lock , tower bolt , sliding bolt ,rat rail , peg stay ,peg set ,not exc 6mm and not exc 9 mm in thickness. by welding etc complete all as directed by engineer incharge

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F steel windows with side hung shutters in repair including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded (factory made)

Ditto,all as per item no 98 but without glazing bars (factory made)

S&F steel ventilator with top hung shutter in repair including hinges, steel peg stay complete all as specified and directed(factory made).

M&L for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike framed guard bars and similar work conforming to Fe 290, Gde - E-165.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1998 grade St.-240

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described.

M&L for Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&Fixed in repair of good quality PVC syphon kit for low level flushing cistern 0f 10ltrs capacity complete all as directed.

S&Fixed in repair two way CP brass fancy type bib cock 15mm bore all as specified . Min (250 gms) complete all as specified and directed

S&F in repair health faucet ABS Body with 8mm dia 1m long flexible tube & wall Hook screwed for 15mm bore iron pipe or unionas approved by GE

Samaksh Enterprises