8576 SPECIAL REPAIR TO BLDG NO P 1 4 RMC LINE ALONWITH TOILET PROVISION OF X RAY RESISTANT WALL TILIES IN CIVIL OPD OF CH AND REPAIR REPLACEMENT ADDITION OF GARDEN LIGHTS WITH CHANGING OF TWO PANEL AT OFFICE OF THE PCDA O UNDER AGE BR-III AND EM II

Amount

M&L for dismantling of complete old existing water proofing treatment, PCC & screed bed of any thickness and any type and cleaning the surface of slab with wire brushes remove dust & foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc. 500m with M&L for carried out water proofing treatment to RCC roof slabs, walls, chajjas etc complete as specified below and as directed by Engineer-in-Charge:- (a) M&L for PCC 1:2:4 type B-0, 25mm average thickness as in leveling course / padding concrete. (b) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces when concrete is green. (c) Preparing plastered surfaces of roof slab, walls, chajjas etc by booming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @ 0.70 Kg/Sqm of area, complete all as specified. (d) Supplying & Laying 3mm thick APP polymer modified approved membrane non woven, polyster weighing not less than 3.60Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method and carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of Engr-in-charge. (e) Finally applying two coats of solar reflective bitumastic aluminium paints on the top of membrane surfaces.

M&L for 22 to 25mm thick mirror polished kota stone of size 600x600mm laid over and including cement screed bed 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of old concrete damaged floor hearth and removal of debries outside MD land etc. complete all as specified and directed

M&L for Mirror polishing on existing kota stone / marble stone work where ever required to achive high glossy finish complete all as specified and directed

M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) three track sliding window with two or more shutter with 5mm thick tinted glass one shutter including with stainless steel wire cloth 0.36mm nominal dia and 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make as mentioned here-in-after, complete all as specified and as directed by Engr-in-Charge:- (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20689 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F powder coated aluminium (minimum thickness of powder coating 50 micron) ventilators / louvers using 4mm thick x 10cm wide frosted glass strips and by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make as mentioned here-in-after including with rubber beading etc, complete all as specified and as directed. (a) SP : 20027 (b) Glazing clips : 19352

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6, including dismantling of old existing brick / PCC block wall complete all as specified and as directed

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6, complete all as specified and as directed

S&F 15 mm bore PVC connection 450 mm long with PTMT nut and PVC washer, complete all as specified and directed.

S & F in repairs 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fixing in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore GI pipe, complete all as specified and directed.

S & F in repairs 15 mm bore angle cock cast copper alloy screwed down high pressure without or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S&F in repairs 25mm bore ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S & F Cast iron work grade FG 150, articles n. exc. 5 kg each, un-machined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed

S&F PVC (SWR) vent cowl 75mm bore, complete all as specified & directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.16 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match including 20mm thick screed bed or bedding layer in CM 1:6, including dismantling of old unserviceable tiles and removal of debries outside MD land etc. complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 300x200x7mm thick as on vertical surfaces such as skirting & dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick rendering in cement mortar (1:4) with and including triangular filleting in CM 1:4 on top edges including dismantling of wall tiling including taking down cement plaster and and removal of debries outside MD land etc. complete all as specified and directed

M&L for Non Toxic, non-reactive, permanent radiation shielding, tiles 12mm thick,(=2mm pb @100Kv) size 300x300mm, Density: 3.9 g/cc in vertical surface an fix with 'Platinum Star Plus' adhesive from Ardex Endura in 5 to 8mm thick. Coat the tile edges and all joint gaps with X-ray radiation Shielding additive including taking down of old unserviceable wall tiles complete all as specified and directed

M&L for lead lining door shutter with 2mm thick lead lining sheet sandwiched with and including 18mm thick BWR plywood on both sides laminated with decorative laminate 1mm thick, including lead lining chowkhat complete including builder hardware of stainless steel complete all as directed by Engineer-in charge

M&L for complete removal of existing treatment from the old plastered surfaces of walls and applying two coats of acrylic emulson over a coat of primer and 2mm thick wall care putty including preparation of surfaces even and smooth by applying sand papper etc complete all as specified and directed.

M&L for complete removal of existing treatment from the old plastered surfaces of walls and applying two coats of acrylic smooth exterior paint including preparation of surfaces even and smooth by applying sand papper etc complete all as specified and directed.

S&F 1000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade as in washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long including with fittings & fixtures and brass copper alloy tank nipple of suitable size including taking down of old existing water tank complete all as specified in SSR Part-I complete all as specified and as directed.

S & F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor including with 10 litres capacity, PVC flushing cistern, low level including PVC waste coupling & PVC flush pipe of 32 mm dia and complete internal macanism including brackets etc complete all as specified and directed

S & F in repairs Vitreous China Urinal, Half stall type, white with complete fittings including Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) etc complete all as specified and directed

M&L for providing 20-25mm thick machine cut cudappah stone slabs, fixed independently as in shelves or cooking platform and the like locations etc laid over and including 15mm thick screed bed in Cement Mortar (1:6), complete all as specified and as directed

M&L for 20mm thick Granite (of any type / colour) work (table rubbed and polished) as in steps, pillars; window cills / jamb, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius etc laid over and including 15mm thick screed bed in Cement Mortar (1:6) including dismantling of old unserviceable existing finishes and removal of debries outside MD land etc. complete all as specified and directed

Rounding of edges of granite stone slabs , as in Wash hand basin slab and other similar situations complete all as specified and directed.

S&F PVC flexible pipe, 40mm bore, having length 600mm complete all as specified and directed.

S&F soap dish, chromium plated, stainless steel of size 160x160x1mm thick, fixed to wall with plug & CP brass screws, complete all as specified and directed.

M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down of old unserviceable pipes and connections, complete all as specified and directed.

M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down of old unserviceable pipes and connections, complete all as specified and directed.

M&L for cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches / under floor or fixed to wall including dismantling of old unserviceable breaking up pipes PVC or AC set in CM or solvent, complete all as specified and directed.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches / under floor or fixed to wall including dismantling of old unserviceable breaking up pipes PVC or AC set in CM or solvent, complete all as specified and directed.

S&F PVC (SWR) 160mm bore pipes, 0.40 Mpa (4 Kg/ Sqcm), single socketed in any length with rubber ring joints laid in trenches / under floor or fixed to wall / ceiling including dismantling of old unserviceable breaking up pipes of any type, complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 75 mm bore complete all as specified and directed.

M&L for 75mm dia, cast iron floor / nahani trap with stainless steel grating (With or without hole) including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F 40mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches, complete all as specified and directed.

S&F 75/100 mm round Stainless steel Grating with or without hole complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N /Sqmm, modules of elasticity 900 N / Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/ lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (i) For WPC solid door / window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii). M.S. hold fast/lugs, dash fasteners shall be measured and paid separately.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges shall be measured and paid separately

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed

M&L for preparation of new surface of wall and applying two coats of Apex (Exterior emulsion paint) over one coat of primer on wall complete all as specified & directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed

M & L for preparation of old steel surface exceeding 10 Cm width or girth and apply one coat of synthetic enamel paint complete all as specified & directed

M&L for framed work as in grills, gratings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, ladder, railings and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

S&F 200 mm long aluminium, anodised, powder coated barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long butt hinge, stainless steel, heavy weight, cold rolled and fixed complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

S&F floor door stopper, over all length of cover plate 150 mm of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in door, complete all as specified and directed.

S&F powder coated 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F Second Class hard wood (Sal) plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed .

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts, complete all as specified and directed.

M&L for 3mm thick Aluminium Composite Panel (ACP) exterior grade (skin thickness 0.25mm) including aluminium anodised frame work of AA 300/5000 series with one core of material of virgin LDPE and coating of kynar 500 resin based PVDF coating (metallic colour) with joint filling silicon weather proofing any colour, complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and directed.

S&F 30mm thick flush shutters, solid core contruction, with block board core and plywood face panels, commercial type on both sides with and including both face including 6mm thick 1st class hard wood teak beading all arround on edges of shutters, complete all as specified and directed.

S&F powder coated, 150mm size aluminium handles, fabricated type, anodised and fixed, complete all as specified and directed.

S&F powder coated, barrel tower bolts of extruded section and fixed aluminium anodised, 150mm long, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore, complete all as specified & directed.

M&L for rendering 10 mm thick on fair faces of brick or stone or concrete surfaces in cement mortar 1:6 with finished even and smooth without using extra cement including taking down of old existing cement plaster, complete all as specified and directed

M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick or stone or concrete surfaces, finished even smooth with spong finish duly mixed with integral water proofing compound as per manufacturer’s instructions including taking down of old existing cement plaster, complete all as specified and directed Note :- WPC shall be measured & paid separately under respective item

M&L for 15 mm thick rendering in two layers, 10mm thick in CM 1:4 and 5mm thick in CM 1:4 on other than fair faces of brick / concrete surfaces including finishing the 1st layer fair and even and 2nd layer fair and smooth without using extra cement including mixed with integral water proofing compound in both layers as per manufacturer’s instructions, complete all as specified and directed. Note :- WPC shall be measured & paid separately under respective item

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats acrylic smooth exterior paint, complete all as specified and directed

M&L for 150mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed

M&L for concrete bed 1:4:8 type D-2 as in drain pipes including forming cradles, suitable for 150mm bore of pipe, complete all as specified and directed.

M&L for providing cement concrete type C- 2, 1:3:6 (using 40mm size graded stone aggregate) 75 mm thick , laid in alternate bays as in plinth protection finishing even and fair on top using extra cement with 6mm wide joints throughout the thickness of plinth protection or Path including demolition of existing unserviceable plinth / path of any type and remove debries complete all as specified and directed.

M & L for precast, coloured, chequrred, cement concrete tiles, glossy finish of size 305x305x25 mm thick size, conforming to IS-1237 (2006), set & jointed in neat cement slurry @ 3 Kg/ Sqm and pointed with grey cement and pigment as in floor and cut and polished, laid over and including 20 mm thick screed bed in cement mortar 1:6, complete all as specified and directed

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for laying of cables, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft /loose soil, complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for laying of cables, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard / dense soil, complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for laying of cables, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft / dis-integrated rocks, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm, complete all as specified and directed

Removing excavated material exc. 50m but n. exc. 250 m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed

Taking down carefully aluminium point wiring (light, fan, socket or power), complete, (fitting such as switches, ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making good disturbed surfaces of wall, floor to match with existing surface etc complete all as specified and directed

M & L for Point wiring with colour coding as per IS, with multistranded copper conductor 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS- Cable conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable, drawn through in and including heavy duty PVC concealed conduit of white / ivory colour including all accessories after cutting chasing in wall of any type /ceiling etc, including making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface etc. complete including heavy duty ISI marked Gl sunken boxes with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly etc complete all as specified and directed for the following:- (a) One light/fan point controlled by one switch

(b). One Socket outlet point, 5 Amp, on independent board.

(c). One Socket outlet point, 5 Amp, on same board.

M&L for point wiring using approved colour coding as per IS, with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade ISI-694 marked for 15 amp socket outlet, independent, with pressed steel sunken boxes not less than 60 mm deep with earth dolly duly painted with two coats of black bituminous paint over a coat of red oxide primer for mounting of accessories switches/sockets etc, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

Supply & fixing modular switch, 1 way, 6 Amps, 1 module complete all as specified and directed.

Supply & fixing modular switch, 1 way, 16 Amps, 1 module complete all as specified and directed.

S & F modular Socket, 6A - 2/3 pin combined 2 module complete all as specified

S & F modular Socket, 16A - 2/3 pin combined 2 module complete all as specified

S&F ceiling rose polycarbonate isolated body three terminals complete all as specified and as directed.

S & F modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

Supply and fixing LED street light luminaries in a single piece, deep drawn pressure die cast aluminium housing anodised inside and acrylic cover complete with 30 Watt in built control gear including up to 2.5 m twin core aluminium conductor for connection of street light fitting from LT OH line / ceiling rose and street light bracket made out of 25 mm dia Gl pipe light grade, 0.90 m long bend to shape 130 degree angle fixed to pole / wall / ceiling with and including two nos. mild steel clamp made out of flat iron size 40x5mm with nut bolts and washer, complete all as specified and directed

S&F LED light fitting, 1X20 Watt surface mounted Trim LED high efficiency LED luminary aluminum linear batten ingress protection: IP20 with white acrylic cover comprises pre-wired with high efficiency electronic driver, opal diffuser gets glare free, smooth light distribution, complete all as specified and directed

Taking down Ceiling fans of any size, removing to workshop for servicing, cleaning, lubricating, replacement of split pin, rubber bush and other spare required if any re-fixing the fans at the same locations with and including PVC cable with stranded copper conductor of size 0.75 Sqmm, complete all as specified and directed

S&F in replacement canopy suitable for ceiling fans (Set of two) complete all as specified and directed

M&L for cutting and making hole into or through cement concrete or stone masonry wall of thickness up to 45cm and in girth n.exc. 45cm for fixing exhaust fan of size 300mm sweep & providing fasteners grouted in wall four nos. inside for fixing of Exhaust fan and four nos. outside for fixing louvers and re-dressing the disturbed surface and making good & smooth with cement plaster 1:4 to match existing surface including white wash complete all as specified and directed

S&F IP-54, protection metal double door Vertical TPN-DB rated bus bar, 415 2 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules with and including 160 Amps MCCB, 4 pole as incomer and SP/TP MCB as outgoing and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white or colour washing or distempering (as applicable) to the disturbed surfaces to match the existing surface complete all as specified and directed

S & F sheet metal enclosure double door, SPN recess mounted / wall mounted, suitable for distribution boards when MCB to be used having 200 Amp rated bus bar 12 ways 240 V, complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm dia upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 20 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified & directed and shown on plate No 3 of SSR Part-I 2009.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete all as specified and directed.

Supply and Fix in replacement mild steel clamp with rubber reel, nuts, bolts, split pin etc suitable for 1200 / 1400 mm sweep ceiling fan, complete all as specified and directed

Supply and fixing of MCB, TPN, 63 Amps, 240 Volts, breaking capacity 10 KA ‘C’ series complete all as specified and directed

Supply and fixing of MCB Single pole and neutral rated capacity 6-32 Amps, 240 Volts breaking capacity 10 KA ‘C’ series complete all as specified and directed

Supply and fixing of MCB Single pole and neutral rated capacity 10-40 Amps, 240 Volts breaking capacity 10 KA ‘C’ series complete all as specified and directed

M & L for sub main wiring complete with two single core 6 Sqmm, 1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 4 Sqmm drawn in and including concealed PVC conduit including cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed conduit wiring, etc, complete all as specified and directed Note:- Two runs of 6 sqmm & one run of 4 Sqmm cable and one run of PVC conduit will be measured as one unit length

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth strip 25x4mm size upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 40 mm dia GI pipe light grade connected to main control board and GI pipe medium grade 20 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified & directed and shown on plate No 3 of SSR Part-I 2009.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm size galvanised iron earth strip, complete all as specified and directed.

Supply &fix timeline distribution board, timeline 40 amps 3 pole, 230 volts with Timer switch of model INDO ASIAN Timeline-40A 3Pole/230 V-Digital Time switch(cat no TL040ASO) or equivalent in L&T / Havells / Schneider including with mounting arrangement complete all as specified and directed by Engr-in-charge. Note- The distribution board shall be mounted on angle iron frame made out of 40x40x5mm size angle including with necessary excavation & earth work and grouting in PCC 1:3:6 type C-1 with using 20 mm graded stone aggregate completed with legs i.e 30 cm in ground in PCC and 40 cm above ground all as specified and as directed.

S&F in replacement of garden light fittings 15 Watt LED bollard with and including mild steel pipe housing of length 1000mm, 106mm dia with aluminum base plate of dia 186mm with glare free PMMA diffuser, soft 360 light, IP 65 protection, resistance to corrosion complete with necessary fixing arrangements, including PCC 1:3:6 as in foundation of size 300 x 300 x 300 mm suitable for operation on 230 volt 50 Hz AC supply including all standard fittings and fixtures complete all as directed by Engineer-in- Charge Make:- Halonix cat No HLOB-05-15-CW-1M or equivalent cat part in Wipro / Philips / Crompton makes

S&F LED Post top light fitting, 70 watts with die cast aluminium spigot, spun aluminium powder coated top cover aluminium PDC heat sink, opal PC diffuser and clear acrylic for 360 degree indirect light, IP 65 protection, resistant to impact and corrosion, glare free and better uniformity, including necessary fixing arrangements as required at site complete all as specified and as directed by Engineer-in-Charge. Make :- Halonix cat no HLPT-04-70-CW or equivalent cat part in Wipro/Philips / Crompton

Supply, laying and testing 70 Sqmm, 3.5 core cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor complete all as specified and directed

Supply, laying and testing 16 Sqmm, 4 core cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor complete all as specified and directed

M&L for laying reinforced concrete pipes, class NP2 of dia 100 mm, 2 nos half round (for bottom and top) and before laying exacaved area shall be leveling complete all as specified and as directed.

Supply and fix exhaust fan AC single phase 230/240 volts heavy duty of size 300 mm sweep, 1400 rpm, with louvers complete all as specified and directed Make- Bajaj cat no 70062 maxima DXI 300 white dome or equivalent cat part in make Crompton / Orient.

SARATH ENTERPRISES (BID ID -3086935)

M/s.BAJRANG CONSTRUCTION (BID ID -3084200)

AJINKYA VIKRAM GAIKWAD (BID ID -3085786)

ASMEE ENGINEERING SERVICES (BID ID -3092598)

Santosh Pandurang Pise (BID ID -3077386)

L.K.R.TIWARI CONSTRUCTION (BID ID -3093885)