Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹38.0 L+₹53,456 (1.43%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹38.4 L+₹96,215 (2.57%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹39.7 L+₹2.3 L (6.08%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹39.8 L+₹2.4 L (6.36%)Rejected-Finance 1331 GENERAL GANJ OPP WATER TANK MATHURA 281001 | MATHURA | UTTAR PRADESH | 281001 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
12 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Mathura
HQ CWE Mathura
As per tender documents
2023_MES_633938_1
CWE/MTR/E of 2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (E) Mathura
As per NIT documents
7 documents required · 7 mandatory
₹500
GE (E) Mathura
₹95,000
Yes
29 Feb 2024
21 Dec 2023
18 Jan 2024
21 Dec 2023
12 Jan 2024
5 Jan 2024
Amount
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, in opening as per specification complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S frame welded/ sealed to the 5mm thick x15mm wide decorative PVC beading of 10mm x 10mm (90 degree) , & joined together with solvent cement, in the frame at site complete all as specified and as directed.
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size floor door spring & lock etc all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).
M&L for Powder coated aluminium(minimum thickness of powder frame coating 50 micron) for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, complete all as specified and directed.
M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, all complete as per requirement and directed.
M&L for 5 mm thick sheet glass ordinary quality and glazing with aluminium beading exc 0.5 Sqm in each pane complete all as specidfied and as directed.
M&L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
M&L for 75mm powder coated aluminium barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.
S&F aluminium anodized barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed.
S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc. ccomplete all as specified and as directed.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L PCC 75mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed.
M&L for Chequred Cement concrete coloured tiles glossy finish, rubber moulded with grey cement and pigments 20cm x 20cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, with and including 20 mm thick screed bed in CM 1:4 all as specified and as directed.
M&L for 25mm thick sand filling under floors or in foundation incl watering and consolidation complete all as specified and as directed.
M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and as directed.
Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes complete all as specified and as directed.
Dismantling of stone slab of any description of thickness in floors & aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.
M&L 25 mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate as in levelling course for flooring complete all as specified and directed.
M&L for Non skid Ceramic coloured joint free tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles exc 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for Non skid Ceramic coloured joint free tiles 10 mm thick (square/ rectangular) polished, area of each tiles exv 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for Coloured Glazed ceramic tiles in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:3) complete all as specified and as directed.
M&L for light shade Vitrified double charge tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
Ditto all as per above items but on vertical surfaces over and including 10mm thick cement screed in CM 1:3 complete all as specified.
M&L for 20mm thick Granite (of any type) work any colour as specified by Engg-In-Charge (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.
M&L for 50mm thick PCC M-10 grade (Nominal mix) using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.
Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.
Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M&L rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers instructions finished even & smooth (without using extra cement) complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.
Supply only Liquid water proofing compound of complete all as specified and directed by Engineer-in-Charge.
M&L for 15 mm thick plastering in CM 1:4 on fair faces of brick work or concrete surfaces and finishing the surfaces even & smooth without using extra cement complete all as specified and as directed.
M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed.
M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation, filling and mass concrete complete all as directed and as specified
M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benchings etc.complete all as directed and as specified
Dismantling of AC corrugated sheets in roof covering including ridges, hips, valleys etc complete all as specified and directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw complete all as specified and directed.
Dismantling timber scantlings (framed work) exc 40 Sq Cm in section, in any position complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165) for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc 7 for ornamental and intricate design.Complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed .
Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights complete all as specified and as directed .
M&L for 4 mm thick non-asbestos fibre cement building board having fire resistance & moisture resistance properly complete all as specified and as directed .
Taking up or down steel tubing and connections ,15 mm bore complete all as specified and directed.
Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.
M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.
S&F in repair bib taps cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore dia iron pipes complete all as specified and as directed.
S&F in repair angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for 15 mm bore dia iron pipes complete all as specified and as directed.
S&F stainless steel Grating doom 100 mm dia with or without hole complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including taps waste chain and plug but including bracket fixed in repair complete all as specified and directed.
Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
M&L for prepration of newly plastered surface of walls providing 1mm thick wall care putty and applying two coat of distemper oil emulsion including over and including a coat of alklai resitant primer complete all as specified and as directed.
M&L for preparation of new plastered surface of walls/ceiling and applying two coats of weather proof acrylic exterior paint over and including a coat of primer (100% acrylic) complete all as specified and as directed.
M&L for preparation of old decorative surfaces and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.
MM&L for complete removal of existing treatment of wall & preparation of old plastered surface of walls and applying one coats of weather proof acrylic exterior paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and as directed.
Dismantling fencing wire mesh any type complete all as specified and as directed.
Dismantling posts or struts (Wood, Steel or RCC) any section, including Taking out embedded portion making good disturbed ground, posts embedded in concrete, brick work,masonry,etc. complete all as specified and as directed.
M&L for cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.
Dismantling galvanised 2 strand, steel barbed wire in fencing complete all as specified and as directed..
S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 75mm spacing complete all as specified and as directed.
Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc. complete all as specified and as directed. Note: (i)Supply only fencing will be measured and paid separately. (ii)Supply and fix mild steel nut bolt,and flat will be measured and paid separately.
Supply only chain link fencing made out of mild steel galvanised wire complete all as specified and as directed.
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long & dia of shank 5 to 10 mm long complete all as specified and as directed..
M&L Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165) complete all as specified and as directed.
Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable etc. and for foundation of poles, stays etc. n exc 10 sqm on plan and n exc 1.5 in depth and getting out complete all as specified.
Returning filling with earth obtained from excavation including spreading, watering & consolidation in layers not exceeding 15 cms thick, complete all as specified and directed.
Removing surplus soil to a distance not exceeding 50 m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching 150 mm int dia of pipe. complete all as specified and as directed
M&L for PCC 1:4:8 type D-2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm int dia of pipe .
M&L for Salt glazed stoneware drain pipes, grade `A` of 150mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed
Construction of Soakage well of 1.80 mtr dia and 3.0 mtr deep complete all as specified and as shown in drawing No CEJZ/2004/S-35 sheet 1/1 dated 11 May 2004 (Revised 06-08-2005) which includes the following:- (i) Excavation and earth work, including R/F and removal of surplus soil. (ii) Cement concrete in foundation, brick work honey comb brick work. (iii) Reinforced cement concrete, form work, reinforcement (iv) Precast cover slab, plastering, filling brick agreggate and all Pipes and fitting complete all as shown in drawing as specified and as directed.
Demolition of RCC as in cover slabs/ roof slabs of any description( reinforcement cut as required to faciliate demolition ) complete all as directed and as specified.
M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as directed and as specified
Ditto- all as per above item above but MS round bar 10 mm dia and over as in handles of manhole covers.complete all as directed and as specified
M&L for Precast RCC B1 (1:2:4) (using 20 mm graded aggregate) as in cover slabs for manholes etc. complete all as directed and as specified
Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. ( Note: Credit for above items should be made as per credit Schedule separately)
Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge.
Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap incl all type of MCB and making good disturbed surface / wall as per existing complete all as specified and directed
M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge as described below:- a) One light/ fan/ exhaust fan point controlled by one way switch 5 amp complete.
b) One 3 pin 5 Amps socket point controlled by one way switch on same board.
c) One 3 pin 5 Amps socket point controlled by one way switch on independent board.
All as per item No. 94 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .
Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified.
Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed.
Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified.
Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified.
Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.
Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified.
Supply and fixing lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified.
S&F Modular White cover plate with frame, 1 Module complete all as specified and as directed.
S&F Modular White cover plate with frame, 3 Module complete all as specified and as directed.
S&F Modular White cover plate with frame, 8 Module complete all as specified and as directed.
S&F Modular Metal flush box 1/2 module complete all as specified and as directed.
S&F Modular Metal flush box 3 Module complete all as specified and as directed.
S&F Modular Metal flush box 8 Module complete all as specified and as directed.
Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed
Supply and fix LED retrofit lamp 9W complete all as specified and directed.
Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with liminaire effciecy of grater than 80 Lumen/Watt, Colur rendering (CRI) of > 70 and corelated colour temprature (CCT) of 5700K (+500K). The luminaire should have 10 KV surg protection, PF > 0.9 and total harmonic distrotion of THD < 10%, voltage range of 140-280V including all connections complete all as specified and directed.
M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable braket as scrap any size / description complete all as specified and directed.
Taking down the ceiling fan of any sweep carefully from its installed position, dismantling complete with down rod , replacement of capacitor, Rubber wheel bush and cleaning of all dust, applying grease for bearings, reassembling the fan and blades, painting of fans and down rod with synthetic enamel white paint by spraying including filling cavities with filler, writing MES No. with black paint, and keeping a side safely and hanging / refixing in position and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as specified and directed. NOTE:- The spare parts Capacitor & Rubber wheel bush shall be included in the quoted rate.
M & L Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multisranded, 1100 volts grade copper conductor drawn in suitable size of rigid nonmetalic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) with and including 6 Sqmm copper green colour earth wire complete all as specified and directed. Note: Two runs 6 Sq mm(P&N), one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM.
S&F MCB distribution board, TPN 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and directed.
S&F MCB distribution board, SPN 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and directed.
Supply & fix in replacement of MCB TPN 40 -100 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.
Supply & fix in replacement of MCB DP 40 -63 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.
Supply & fixing in replacement of MCB SP 6 - 32 Amps, ' C' series ,bracking cap 10KA, 240V complete all as specified and directed.
Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor of size 16 sqmm 4 core laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps, lugs, glands, nuts and bolts complete all as specified and directed .
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out complete all as specified and directed.
Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified and directed.
M&L for Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed.
Supply and Laying Unreinforced precast concrete cable cover class LV type 1, size 250mmx150mmx40mm complete all as specified and directed.
Supply and laying, testing of lihgt grade galvanised steel tube 40mm bore including all fittings and fixed complete to walls and pole or laid in floors complete all as specified and directed.
Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified and as directed including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery incl necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.
M/s RCC
M/S CHAUDHARY CONSTRUCTION
M/S PREETI CONSTRUCTION
JWALA ELECTRIC CONTRACTORS
M/s Hoti Lal Contractor
M/S RISHI RAJ AGRAWAL
BHARDWAJ CONSTRUCTIONS
ARCHI ENGINEERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .