COMPREHENSIVE MAINTENANCE TO CERTAIN BLDGS OF MD OFFRS ACCN AT DHAULADHAR ENCLAVE UNDER AGE B/R-I OF GE (N) MAMUN

Amount

Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement including taking down of existing plaster of any description and removal of rubbish complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of walls, applying wall care putty to desired even and smooth and levelled surfaces (any thickness) and applying two coats of oil emulsion distemper on walls over a coat of primer complete all as specified and directed. Note: Where thickness of putty is required more than 1mm thick, the same shall be make good using POP and than putty shall be applied to obtain even & smooth surface. Nothing extra shall be admissible on this account.

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L Preparation of old plastered/unplastered surfaces of walls by making plastered surface smooth using wall care putty to disturbed surfaces (where required) and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old surface of walls including minor repair (to make good in cement mortar 1:6 or with POP) to obtain smooth surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L for Complete removal of existing treatment from walls, brooming down with broom or steel wire brush; scrapping down smoke soot, moulds, mass, efflorescent salts, trading oil and greasy spots etc, applying wall care putty, making the surface even and smooth and applying two coats of oil emulshion distemper over a coat of primer complete all as specified & directed Note: Where thickness of putti is required more than 1mm thick, the same shall be make good using POP and than putti shall be applied to obtain even & smooth surface. Nothing extra shall be admissible on this account.

M&L for preparation of old plastered surface of walls by washing rubbing, stopping brooming down with steel wire brushing scrapping down smoke roots, moulds salts and trading oil and greasy spots and applying one coat of white wash on ceiling surface complete all as specified & directed.

M&L for preparation of old plastered surface of walls by washing rubbing, stopping brooming down with steel wire brushing scrapping down smoke roots, moulds salts and trading oil and greasy spots and applying one coat of white wash complete all as specified & directed

M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repair 18mm thick HDHMR (High density high mositure resistance) one side decorated Pre laminated board, density not less than 850 kg per Cum, confirming to IS as in kitchen Cabinet, cupboard, ward robe and like fixed with suitable nails ( edgeing laps screws) to steel/wooden frame complete all as specified and as directed. Make : Action Tesa, Centuri Ply wood, Greenply Ply wood or equivalent as approved.

All as per item No 14 but plain both side.

S&F 5mm thick HDHMR (High density high mositure resistance) Pre laminated board, density not less than 850 kg per Cum, confirming to IS as in kitchen Cabinet, cupboard, ward robe and like fixed with suitable nails ( edgeing laps screws) to steel/wooden frame complete all as specified and as directed. Make : Action Tesa, Centuri Ply wood, Greenply Ply wood or equivalent as approved.

S&F 100 mm size stainless steel brignt finish handle (as per sample), fixed with nut and bolt /screws complete all as specified and directed.

S&F Telescopic type Side channel of drawer of standard size including roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 60mm long complete all as specified and directed.

S&F stainless steel (304 grade) plain basket of size 17''x20''x4'' (as per sample), complete all as specified and directed.

S&F Stainless steel (304 grade) partition of size 17''x20''x6'' (as per sample), complete all as specified and directed.

S&F Stainless steel (304 grade) cutlery of size 17''x20''x6'' (as per sample), complete all as specified and directed.

S&F Stainless steel (304 grade) cup & soucer of size 17''x20''x4'' (as per sample), complete all as specified and directed.

S&F Stainless steel (304 grade) plate basket of size 17''x20''x6'' (as per sample), complete all as specified and directed.

S&F Stainless steel (304 grade) auto, zero crank hinges, fency type (as per sample), with concealed pattern fitted to shutters complete all as specified and directed.

S& F Magnetic catcher (as per sample) fixed with Nut and bolt complete all as specified and directed.

S&F 100mm hasp and staples, safety type of aluminium anodised (as per sample), complete all as specified and directed.

M&L for vitrified tiles double charged light shade 7-8 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed or bedding layer of mortar in CM (1:6) including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.

M&L for vitrified tiles double charged light shade 7-8 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed or bedding layer of mortar in CM (1:6) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:6 including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.

M&L for green/black marble work 15-16 mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4), pointed in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of including demolition of old stones/tiles and rubbish off the premises complete all as specified and directed.

M&L for Round chamfering to the edges of marble/granite slabs complete all as specified and directed.

S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers , PVC waste pipe fixed in repair including waste copling; bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for screed bed or bedding layers of mortar 15 mm thick in CM 1:4 for laying floor finishes, rough finished surface complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each and refixing in same opening safely, (including minor repairs ) complete all as specified and directed.

Disconnecting water tank (from Roof Slab/staging of single/double/Triple story bldg), float valve with float arm, outlet pipe from PVC service water tank, emptying stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes finally washing the internal surfaces with bleaching powder, closing wash outlet, re-fixing water tank, float valve and out let in proper position, replacemt of old PVC top cover with proper hinge type cover as per sample including minor repairs if required and testing of capacity 250 litres to 500 liters complete all as specified and directed.

Disconnecting water tank (from Roof Slab/staging of single/double/Triple story bldg), float valve with float arm, outlet pipe from PVC service water tank, emptying stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes finally washing the internal surfaces with bleaching powder, closing wash outlet, re-fixing water tank, float valve and out let in proper position, replacemt of old PVC top cover with proper hinge type cover as per sample including minor repairs if required and testing of capacity 500 litres to 1000 liters complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing of pipe 15mm bore complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore complete all as specified and directed.

S&F 15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc all as specified

S&F in repair 20mm bore dia gun metal globe or gate valves (as per sample) cast copper alloy chromium plated fancy type, ISI marked with crutch or butter fly handleswith iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

M&L for cutting chases, pinning in brick work, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed.

S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick complete all as specified and directed.

S&F in repair 15mm bore dia concealed type angle valve / stop valve (as per sample) cast copper alloy chromium plated fancy type with long shank and cup ISI marked with crutch or butter fly handles screwed down,screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair over head shower rose 125mm size (square/circular as per sample) for 15mm bore pipe, cast copper alloy chromium plated complete all as specified & directed. Make - Jaquar, Marc and Johnson

M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 500 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank, removal from site and disposal beyond MOD land complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 1000 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank, removal from site and disposal beyond MOD land complete all as specified and directed.

S&F in repair PVC Lid for water tank of Capacity 500 Ltr to 1000 Ltr complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish beyond MOD land complete all as specified and directed.

M&L Plain cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sunken floors portion including demolition of PCC & removal of rubbish complete all as specified and directed.

M&L 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately)

M&L for bitumen blown of any grade, applied hot, two coats to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.

M&L for repair to old steel window not exc 1 sqm including replacement of unserviceable/ damaged hinges, all handles, necessary welding to shutters and chowkhat for making window in serviceable condition, all members grinding to smooth surface and applying redoxide primer to grinded surface complete all as specified and directed.

All as per item No 59 but exc 1.00 sqm but not exc 2 sqm.

S&F 35mm thick single piece factory made wire gauge door shutter with wire cloth (steel & aluminium XPM) manufactured by PVC sheets printed 5mm thick on both side on frame made out MS tube 19 SWG of size 19x19 mm with lock rail & beautified by PVC beading all round fixed with PVC solvent cement complete all as specified & directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45x70 mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant, fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (i) For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (ii) Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain chamfered or rounded, mitred and rebated without sash bars any umbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge. Size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.

S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.

S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick consisting of frame made out M.S. tubes for top and bottom rails. MS frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, supplying & fixing in the frame as per specification & drawing or (as per sample) complete all as specified and directed.

M&L Soild PVC door frame of size 50mm x 95mm (suitable for moulded door) made out of 5mm wood grain colour PVC sheets & edges will be painted to match printed sheet as reinforced with 19 mm square MS tube and fixing in opening as specifiecation & drawing complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F for 250 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed

S&F aluminium anodized barrel tower bolts 150 mm of extruded section (as per sample) fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden / steel frame glazed with putty or fixed with beads, rubbish off the premises complete all as specified and directed.

S&F 3mm thick frosted/pin head glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F in repairs 150 to 250 mm mild steel helical door spring for door closer, complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples, fixed in repair complete all as specified & directed.

S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore dia Bib taps long body, cast copper alloy, chromium plated fancy type ISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore pillar tap cast copper alloy, chromium plated, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed.

M&L for 15mm bore dia Brass CP center hole basin mixer suitable for mixing hot & cold water screwed down & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs wall mixer (as per sample) for 15mm bore dia, cast copper alloy chromium plated fixed of complete all as specified and directed.

S&F in repairs Sink mixer for 15mm pipe, cast copper alloy chromium plated (as per sample) fixed in repairs of complete all as specified and directed..

S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia waste pipe complete all as specified and directed.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.

S&F in repair corner glass shelf assembly (as per sample) consisting of 5.5mm thick sheet glass (225mm dia quarter) with brass chromium plated brackets double guard and railing complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw complete all as specified and directed.

S&F Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed.

S&F Health foucet 8mm dia 1.20m stainless steel flexible hose with wall hook and making connection including taking out existing health foucet of any description complete all as specified & directed. Make - Jaquar , Marc and Johnson.

S&F in repair PVC low level flushing cistern 10 ltr capacity, inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastic seat and cover with stainless steel or aluminised hinging device and fixed complete all as specified and directed.

S&F in repair one piece Vitreous china wash down water closet pan pedestal pattern with flusing cistern, (size 69x36x74cm) white including making connections to trap, and to flush pipe including plastic seat and cover (as per sample ) with Stainless steel or aluminised hinging device and fixed complete all as specified and directed. Make : Hindware cat part No. 92082 or equivalent to Somany & Cera

S&F in repair vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding, connection to drain out pipe, flush pipe, flush pipe and anti syphonage pipe etc, making good to floor where required complete all as specified & directed.

S&F in repair toilet paper holder with flash recessed type of stainless steel complete all as specified and directed.

S&F plastic water closet seat cover, closed pattern with flat bottom and cover (as per sample) and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC connection 15 mm dia & length 450 mm with PTMT nuts complete all as specified and directed.

S&F in repair 20mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed.

Taking down brick tiles, terracing tiles, single layer from roof laid, bedded and pointed in any mortar, including rubbish off the premises complete all as specified and directed.

M&L for PCC padding, 1:2:4 type B-0 ( using 12.5mm graded crushed stone aggregate) complete all as specified and directed.

M&L 20 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface, finished even and smooth mexed with liquid WPC of make Dr. Fixit or STP, as per manufacturer's instructions complete all as specified & directed (WPC shall be measured and paid separately)

M&L for APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet walls to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP having a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm using butane torch by torch application with 10cm side laps and 15cm end overlap of membrane.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete if required and making surface in true line, true shape, finishing the surface smooth without using extra cement complete all as specified and directed.

M&L for plastering 15mm thick in CM 1:4 two layers (10+5mm respectively) external layer shall be mixed with liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc, surface finished even and smooth using extra cement including taking down existing plaster of any description and removal of rubbish complete all as specified and directed. Note : WPC will be measured and paid separately.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls including taking down, cleaning or refixing and removal cleaning or refixing and removal complete all as specified & directed. complete all as specified and directed.

Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 34718.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

Nishikant Mahajan Govt Contractor

WALIA ENTERPRISES

dadwal engineers

TARA CONSTRUCTIONS