Supply Orthopedic trauma Implant for Orthopedic Department, Jaipuria Hospital,

Electrical Items :

Orthopedic Implants (TRAUMA )

Femur Interlocking Nail Diameter 8-13 mm and length 32-44mm with Four locking Screws

Tibia Interlocking Nail – Diameter 8-12 mm and length 28-38mm with Four locking Screws

Expert Tibia Interlocking Nail – Diameter 8-12 mm and length 28-38mm with Four locking Screws

Humerus Interlocking Nail diameter 6-9 mm length 22-34cm with Four locking Screws

PFN Nail Short SS all size with locking screw all size

PFN Nail Long SS all size with locking screw all size

proximal femur locking buttress plate with compatible screws

1/3 Tubular plate 3.5 mm hole size 4-10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.

Semi Tubular plate 4-10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.

Reconstruction plate. 4.5 mm hole size 4-10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.

Reconstruction plate 3.5 mm hole size 4-10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.

Locking Reconstruction plate 4.5 mm hole size 4-10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.

Low Contact Broad D.C.P. 4.5 mm hole size6-10 with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.

T.Plate 3.5mm 3-10 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per pate holes.

T. Locking Plate 3.5mm 5 to 9 holes with screw cortical or cancellous partially or fully threaded any size and number as per pate holes.

T Oblique locking plate 3.5mm with compatible screws, cortical concellous, partially of fully threaded (any size and number, as per plate holes)

Locking Ellis Plate 3.5 mm for L/E Radius with compatible screws, cortical concellous, partially of fully threaded (any size and number, as per plate holes)

locking variable angle lower end radius plate with compatible screw

lower end ulna locking metaphyseal plate with compatible screws

Locking Olecranon plate (Lt. & Rt. With 3-14 holes)

lateral malleolus locking butteress plate with compatible screws

Locking distal medial tibial plate 2.7/3.5mm (Lt. & Rt. With compatible standard locking screws all sizes)

Anatomical locking plate for Distal Humerus (both medial or lateral) 4-10 holes with compatible cortical, cancellous and locking screws any number and size as per plate hole

Locking.D.C.P. Small 3.5 mm 5-8 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes.

Locking D.C.P. narrow 4.5 mm 5-8 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes.

Locking D.C.P. Broad 4.5 mm 5-12 holes with compatible screw cortical or cancellus partially or fully threaded any size and number as per plate holes.

Proximal humerus locking plate (Low Profile) – 3-12 holes with compatible locking and non locking head screws self tapping any size and number as per plate holes

Proximal humerus locking plate (PHILOS) – 3-12 holes with compatible locking and non locking head screws self tapping any size and number as per plate holes

Distal femoral locking plate- 5-13 holes Lt. /Rt. with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping

Distal femoral Anatomical contoured locking plate- 5-13 holes Lt. /Rt. with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping

Proximal Lateral Tibial locking plate- L/R 5-13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping

Proximal Tibial Anatomical Contoured locking plate- L/R 5-13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping

T Plate 4.5 MM for Proximal Tibia 5-13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes

Locking T Plate for Proximal Tibia 5-13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping

L Plate 4.5 MM for Proximal Tibia 5-13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes

Locking L Plate for Proximal Tibia 5-13 holes with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping

Anatomical locking plate for Distal Tibia 5-12 holes with compatible cortical, cancellous and locking screws any number and size as per plate hole (medial / anterolateral)

Trochantric Locking plate (Proximal femur locking plate) 5-13 holes Lt. /Rt. with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes with compatible 5.0mm locking head screw self tapping

4.5mm cortical screw self tapping any size.

6.5mm cancellous bone screw 16mm / 32 mm/ fully threaded

Herbert screw (TITANIUM)

7.0 mm cannulated cancellous bone screw 16mm / 32 mm / fully threaded (TITANIUM)

washer

7.0 mm cannulated cancellous bone screw 16mm / 32 mm / fully threaded

PFN A2 long all sizes with locking bolts / spiral blade

PFN A2 short all sizes with locking bolts / spiral blade

3.5mm cortical screw self tapping any size.

Malleolar screw 4.5mm with matching washer size 35-70mm.

Narrow DCP – 4.5mm 5-9hole with compatible locking screw any size and number as per plate hole.

Small DCP – 5 to 9 hole with compatible screw cortical or cancellous partially or fully threaded any size and number as per plate holes.

Reconstruction locking plate – 3.5mm 5-10 holes with compatible screw cortical cancellous partially or fully threaded any size number as per plate hole.

Anatomical locking plate for Clavicle 5-12 holes with compatible cortical, cancellous and locking screws any number and size as per plate hole

DHS plate 120 - 145 degree (4-14 holes) long barrel with compatible leg screw and compatible bolt and compatible screw any size and number as per plate whole size.

DHS with trochanteric stabilization plate plate 135degree (4-14 holes) long barrel with compatible leg screw and compatible bolt and compatible screw any size and number as per plate whole size.

DHS plate 120 - 145 degree (4-6 holes) short barrel with compatible leg screw and compatible bolt and compatible screw any size and number as per plate whole size.

DHS with double angled plate 120degree (6-14 holes) with leg screw and coupling bolt and plate screw any size and number depending on plate whole size.

DCS Plate -95 degree (6-14 holes) with leg screw and coupling bolt and plate screw any size and number depending on plate hole size.

DHS Plate -135 degree angle Long Barrel with locking plate, Lag Screw and locking screws.

DCS Plate -95 degree angle Long Barrel with locking plate, Lag Screw and locking screws.

Helmet frame JESS for fracture of upper tibia.

Elastic nail of all size & diameter (S.S.)

Elastic nail of all size & diameter (Titanium)

Charley’s device for ankle arthrodesis

Square nail ulna- diameter 2-3mm size 21-28mm

Square nail radius- diameter 2-3mm size 21-28mm

Steniman pin sterile – 3,4,4.5mm size 200, 225mm

Rush nail – 3,4,5mm diameter size 20-30cm

Enders nail -3.5mm and 4.5mm diameter size 22to44cm

HTO puddu plate with compatible screws

DFN – Standard locking option all size nail and all size locking screw.

Complete ilizarov ring fixator system- to include

Half ring

5/8 rings

Nuts 6mm to 12mm

Square nuts

Sparing washer 1.5mm

Flat sided washer 2mm and 4mm

Slotted washer 4mm,

Block for half pins

Telescopic rods

Gradated telescopic rods

Connection plate with threaded ends

Twisted plates

Composite foot ring with carbon ring

Short arches and long arches

Composite half pin arch

Arches with holes

Nylon insert nut

Triangular nuts

Wire fixation buckle

Block for half pin with slave

Universal joint

Rotational and translation devices

Carbon device

Composite connection plate

Composite long connection plate

Hydroxy apatite coated threaded pins 3.5, 4.5, 5.6mm

Tapered half pin 4mm diameter

Pediatric ilizarov set for tibia femur and humerus

Moor’s pin 60-100 mm length

Austin moor prosthesis (sterile) size 37-55mm

Bipolar prosthesis (non fenestrated) sterilized size 37 to 55 mm with bone cement 40grm, cement restrictor & centralizer.

Bipolar prosthesis (fenestrated) sterilized size 37 to 55 mm

Modular Bipolar prosthesis (non fenestrated) sterilized size 37 to 55 mm with bone cement 40grm, cement restrictor & centralizer.

Modular Bipolar prosthesis (non fenestrated) long stem sterilized size 37 to 55 mm with bone cement 40grm, cement restrictor & centralizer.

Modular Bipolar prosthesis uncemented sterilized size 37 to 55 mm with bone cement 40grm, cement restrictor & centralizer.

Disposable sterile cement gun/ syringe kit

Kustschner clover leaf nail diameter 6-12 mm size 22-44cm

K-wire all diameters size length 150mm

1/3 tubular plate 4-10 holes 3.5mm compatible cortical screw and cancellous partial or fully threaded of all sizes and number as per plate hole size.

Semi tubular plate 4-10 holes 3.5mm compatible cortical screw and cancellous partial or fully threaded of all sizes and number as per plate hole size.

Mini DCP plate 4 to 8 holes compatible cortical screw and cancellous partial or full threaded of all sizes and number as per plate hole size. For metacarpals etc

2.7mm DCP plate 4 to 8 holes compatible cortical screw and cancellous partial or full threaded of all sizes and number as per plate hole size.

CC screw with washer 4mm all sizes

CC screw with washer 6.5mm all sizes

3.5mm, 4mm, fully threaded cancellous / cortical screw in all size.

lateral melleoli anatomical locking plate with compatible screws

trochanteric stabilization plate with screws

Straight / curved pelvic reconstruction plate with compatible screw 3mm 5 to 8 hole.

Y- shape plate for calcaneum with screws.

Straight 4-12 holes.

K- wires 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.5 mm, 3.0 mm+C122

Tension band wire.

S. S. wire spool 18,20,22,24,26 SW 4m.

Drill Bit 2.5 mm / 3.2 mm

Drill Bit long / canulated

External fixator

Tubular rod 100,150,200,250,300, 350mm

Universal clamp

Tube to tube clamps

Cortical Schanz screw in all size

Cancellous Schanz Screw in all size

Delta clamps

Drill bits in all size.

JESS distractor 150,200,250,300,350mm with Allen key. With schanz screw cortical and cancellous in all size.

CTEV JESS distractor set

Distractor duble hole 6mm x 150mm.

Distractor duble hole 6mm x 200mm.

Distractor duble hole 6mm x 250mm.

Distractor duble hole 6mm x 300mm.

Fish mouth Distractor 6mm x 150mm.

Fish mouth Distractor 6mm x 200mm.

Fish mouth Distractor 6mm x 250mm.

Fish mouth Distractor 6mm x 300mm.

Link joint small

Link joint medium

Link joint large

State (canacting) Road 2.5mm 125mm, 150mm,200mm

State (canacting) Road 3mm 125mm, 150mm,200mm

State (canacting) Road 3.5mm 125mm, 150mm,200mm

L- Rod 2.5mm X small, large

L- Rod 3mm X small, large

Z- Rods 2.5mm, 3mm, 4mm

K- wires 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm

K- wires 2.5mm, 3.0mm

Front therd (Schang) pin 2.5mm X 100mm.

Front therd (Schang) pin 3.5mm, 4.0mm X 125mm.

Allen keys 2.5mm, 3.0mm

Spanners 10mm

Malleolar screw 4.5mm 35 – 70mm.

Rail fixator – with following accessories

Rail 240, 300, 400mm

Clamps – Central clamps

End Clamps

Swivel clamps

Ball & Socket clamps

T Ball socket clamps

Granduated swivel clamps

Dyna Ring

T- Clamps

Sandwich Plate

CD Unit (40mm, 80mm & 100mm)

Allen key (6mm)

Tapered threaded pins (all size & diameter)

Tapered threaded pins coated with hydroxyl apetite (all sizes & diameter)

Orthofix

HTO Orthofix

Helmet JESS distractor Set

Mini Rail fixator with all clamps and components – tapered threaded pins (all size & diameter)

Tapered threaded pins coated with hydroxyl apetite (All size & diameter)

Disposable incise skin drape (medium, large, extra large)

Disposable syringe for cement gun

artificial bone graft / Porous tri calcium phosphate Granaules. (pls. specify brand and quantity)

bone cement 40 gm standared / LMW

bone cement 20 gm

Gardener well’s tong small to large

Total schoulder joint

Total Elbow joint

Titanium Pedicle Screw monoaxial Single lock in all size

Titanium Pedicle Screw polyaxial Single lock in all size

Titanium connecting rods different lengths

Hooks – Supra laminar hook and infralaminar hook all size.

Harrington – Rods (a) in all size.

Hooks blut and sharp in all size.

Drummond wires in all size.

and with washer in all size.

Fusion cages of dorsolumber spine in all size.

Expandable cages of dorsal lumbar spine in all size

Transverse connector

Expandable cages of dorsal lumbar spine in all size.

dolphin corporation (BID ID -3028924)

GREENS SURGICALS PVT LTD. (BID ID -3025226)

SHUBHANGI SURGICALS (BID ID -3028872)

Bhargavas Hi Tech Surgimed Co Pvt Ltd (BID ID -3019073)