Repair and Restoration works in Arulmigu Ammainathar thirukovil, Cheranmahadevi taluk, Tirunelveli district

Amount

Clean removal of Pressed Tiles & Weathering Course including all labour charges and incidental charges etc complete

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in lime Mortar 1:3 (One lime and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same lime mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Clean removal of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs including all labour charges and incidental charges etc complete

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Limeconcrete 1:5:10 (One of lime five of M-sand and ten of HBG jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete as per Std, Specification and as directed by the Dept, Officers

Plastering with Lime mortar 1:5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and laying new cut stone of good variety and required size from approved quarry including cost and conveynance of cut stone for labour charges for loading including and all other incidental charges etc complete.

Providing temple type door using teak wood for scantling and planks including cost of all materials and labour charges etc & all incidental charges . complete complying with standard specification. 3' x 6' - Commiss. office approved rate

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn /PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work.

Gopurams upto 75' - 0' height

Vimanam / Gopuram upto 25' - 0' height

Clean removal of lime plaster from walls including all labour charges and incidental charges etc complete

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortar1:4 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Lime Mortar1:4and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area.

Vimanam / gopuram of ht. Up to 15'0" excluding Kalkaram

Vimanam / gopuram of ht. Up to 25'0" excluding Kalkaram

Gopuram of ht. Up to 50'0" excluding Kalkaram

Painting with multicolour (Panchavaranam) good water based exterior emulsion paints complete for the Vimanas/ Gopurams, including cost and conveyance of all materials, labour charges including Artist painter, working in helghts, lifting of material cost of brushes etc., complete. - 100 Sft. Superficialarea.

Vimanam / gopuram of ht. Up to 15'0" excluding Kalkaram

Vimanam / gopuram of ht. Up to 25'0" excluding Kalkaram

Gopuram of ht. Up to 50'0" excluding Kalkaram

Dismantling of Brick / Stone Masonry in lime mortar walls including all labour charges and incidental charges etc complete

Labour Charges for Old Stone Removing:Chitranvanam, Padma Jagati, Adhistanam, Kandam, Pattiyal, Jagati, Kumudagam, Aswapadam, Sthamaba, Sthambam, Kalasam, Thadi, Kudam, Palagai, Veerakandam, Bodhiyal, Uthiram, Kambu, Eludham, Kabothagam, Viyalam, Koodu, Ull Vari, Pavukkal, Thun, Flooring, Nilaikal, Bodhiyal Thani, Uthiram including all incidental charges etc complete

Dismantling Lime Concrete in thirumathil core walls including all labour charges and incidental charges etc complete

Labour Charges for Old Stone Refixing: Aswapadam, Sthamaba, Sthambam, Kalasam, Thadi, Kudam, Palagai, Veerakandam, Bodhiyal, Uthiram, Kambu, Eludham, Kabothagam, Viyalam, Koodu, Ull Vari, Pavukkal, Thun, Flooring, Nilaikal, Bodhiyal Thani, Uthiram including all incidental charges etc complete

North side thirumathil wall

Pavukaal

Pillar

Bothiyal

Uthiram

Basement

Kabothagam

Vayalavari

Brick jelly concrete using 40mm size brick jelly with LM 1:5 including mixing, laying, curing etc.,complete in respects complying with relevant Std, Specification and as directed by the Dept, Officers.

Brick work in LM 1:3 using country brick of size 83/4"x41/4"x2 3/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification.

Restoration by providing water wash and appropriate methodology to restore the originalities of the existing cut stone structure inclusive of necessary scafolding charges conveyance and all thire charges for all tools and plants and clearing the site after completion of work etc., complete.

Pointing for wall and ceiling with Lime Mortar 1:1.5 including cost of special tiles such brush and watering,curing etc complete,as per standard specifications

Painting two coat with approved water based Exterior Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification. -10 m 2 ( S.I. No 358 )

Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Clean removal of old paint from the surface of wooden door and Painting old wood work with two coats of enamel paint of approved quality and color over one coat of white primer in all floors the rates is to include cost of all materials, brushes scaffolding charges etc, complete complying with standard specifications.

Polishing the teak wood door with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.)

Supply and fixing of 2" x 1" Teakwood reeper on wall along with run of 50mm X 20mm UPVSC casing caping cable trunking box with necessary clamps and screws rigidly in the gap of the stone wall (Data-1)

Supply and fixing of 2" x 1" Teakwood reeper on wall along with run of 50mm X 50mm UPVSC casing caping cable trunking box with necessary clamps and screws rigidly in the gap of the stone wall (Data-2)

Supply and fixing of single box type 4'20W LED fitting with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (LED fittings should be of Higherend company make like philips/cromption etc) (Data-3)

Supply and fixing of Havells jeta alba flood light 100W LED fitting with necessary wall grouting clamps with fixing bolts on the ceiling with PVC unsheathed copper leads from terminal to the fitting (Data-4)

Supply and fixing of Havells jeta alba flood light 150W LED fitting with necessary wall grouting clamps with fixing bolts on the ceiling with PVC unsheathed copper leads from terminal to the fitting (Data-5)

Supply and fixing of 9W LED Bulb for BH point (Data -6)

Supply and fixing of 65mm (2.5") dia G.I pipe (class B) of 6mts length with 300mm x 300mm x 6mm MS plate duly welded at the bottom with cone roofing and construction of masonary pedestal and fixing of PVC synthetic fibre box of 8 nos (8" x 6") to house 6A SP MCB (Legrand make)control switch with 1 no 48W LED (Philips make) complete on the GI post with 1.5Sqmm PVC unshealted copper leads with painting of suitable colour (Data- 7)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD-448)

Supply and fixing of 450MM 18” Almonard Wall Fan on wall with connection (Data-8)

Supply and fixing of 18 module surface mounting box with combined cover plate plastic fixed with 18nos 6A 1 way switch with connections (Data-9)

Supply and fixing of 12 module surface mounting box with combined cover plate plastic fixed with 10nos 6A 1 way switch and 1no 6A Universal Plug with connections (Data-10)

Supply and fixing of 8 module surface mounting box with combined cover plate plastic fixed with 6nos 6A 1 way switch and 1no 6A Universal Plug with connections(Data-11)

Supply and fixing of 8 module surface mounting box with combined cover plate plastic fixed with 4nos 6A 1 way switch and 2nos 6A Universal Plug with connections(Data-12)

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End(SD-377)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End(SD - 401)

Supply and fixing of 450mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall(SD-118)

Supply and fixing of louvers shutters arrangements for 450mm (18") sweep (light duty) AC exhaust fan(Data -13)

Supply and fixing of 32A DP MCB Switch in suitable 2 pole sheet steel enclosure in flush with wall with earth connection (Data- 14)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-507)

Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End(SD-553)

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.. (SD-647)

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle ironofsize1-1/2"x1-1/2"x1/4" rigidly fixed on wall covered with hylem sheet of size 2feet x1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 63A fuse units (500V), 1No. neutral link ,copper earth flat of size 1"x1/4" with inter connection of EB meter to fuse units by 16Sq.mm PVC insulated copper wire with 1No 63Amp 30MA Four Pole RCD/RCCB (Higher End) with suitable necessary connection with earth connection complete (SD -131)

Supply and Run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour (Data-15)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.(SD - 336)

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.(SD - 346)

Supply and Laying of 2 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(Data-16)

Supplying and clamping of 2 x 16 Sqmm PVC LTUG armoured cable on post or on wall with MS clamps(SD-195)

Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection(SD-161)

Supply and clamping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD-164)

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection (SD-164)

Supply and fixing of 8" x 6" PVC synthetic box for cable connection (Data- 17)

Supply and fixing of 65mm (2-1/2") dia G.I Pipe(class-B) of 6 mts length with 300mm x 300mm x 6mm base plate duly welded at the bottom with Concreting with Construction of masonary pedestal with necessary clamps to hold the LTUG Aluminium Service Cable with painting of suitable colour (Data-18)

Supply and run of 1 of No.8 SWG copper conductor on suitable PVC rigid pipe on wall with painting of suitable colour for earth connection (Data - 19)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry(SD 211)

Sub total

Santhanakrishnan (BID ID -1352504)