PROVISION OF LBW AND SPECIAL REPAIR WORK AT HEMRL UNDER GERD PASHAN

Amount

Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation etc and getting out in hard/ dense soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc. 25cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material in soil n exc 50 metre and depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 100 mm thick using 40mm graded crushed stone aggregate as in levelling course complete all as specified and directed.

Material and labour for precast concrete block masonry Type C1 1:3:6 (20mm graded crushed stone aggregate) with solid blocks exc 10cm in width and setting in cement mortor 1:4 complete all as specified and directed by Engineer- in -Charge.

Material and labour for Rendering 15 mm thick in CM 1:4 on stone masonry surfaces finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for reinforced concrete pipes, 600mm dia class NP2 ,laid and jointed complete and with and including collars all as specified and as directed.

Material and labour for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in bed to drain pipe complete all as specified and directed.

Material and labour for cement concrete 1:2:4 Type B-2 (using 40mm graded crushed stone aggregate) in surface channels and drains

Material and labour for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Material and labour for reinforced concrete pipes, 100 mm dia class NP2 ,laid and jointed complete and with and including collars complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Material and labour for Hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed.

Removing excavated materials exc 1.5 km but n exc 5 km outside MD land depositing where directed complete all as specified and directed.

Material and labour for factory made rubber moulded precast concrete, machine pressed, interlocking paver block any shape and size, ISI marked, IS-15658-2006, of 60mm thickness, M-35 Grade, with grey cement and pigment, laid over and including 50mm thick fine sand cushioning and joints filled with fine sand, complete all as specified and directed.

Supply and fix precast cement concrete kerb blocks of any size, shape and finished using white cement and pigment of any colour grade M-30, set and jointed in CM 1:4 to match. Note: Laying of kerb stone in alternate any two colours complete all as specified and directed.

Material and labour for factory made precast rubber moulded chequered cement concrete tiles, size 30cmx30cmx22mm to 25mm, hydraulically pressed, different colours, glossy finished, set jointed in neat cement slurry and pointed with white cement and coloured pigment to match the surface including 20mm thick screed bed, in CM (1:6) , complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for Cement concrete (unreinforced) complete all as specified and directed.

Taking down Chowkhats & frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each complete all as specified and directed.

Taking down Chowkhats & frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n exc 4.00 sqm each complete all as specified and directed.

Demolition of existing padding concrete of any description and in any position not otherwise specifically provided for / lime concrete / brick coba/ APP membrane in any layer etc for roof complete and removing rubbish to a distance exceeding 100 mtr and n.exc 250 mtr complete without making any damage to existing RCC slab complete all as specified and directed.

Supply and fix rough cast wired figuard glass, 6.4mm thick and glazing with oil putty in square exc 0.75 sqm but not exc 1.0 sq m in each pane for partition complete all as specified and directed.

Material and labour for Cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate in levelling course roof etc complete all as specified and directed by Engineer in charge.

Material and labour for Rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces complete all as specified and directed.

Supply only integral liquid WPC of approved make complete all as specified and directed.

Supply and fix 3mm thick APP pre-fabricated membrane with and including non woven polyester matt central core of 160 gsm (min) impregnated and coated on both sides with and including layer of APP modified bitumen and finished with and including micro-perforated heat fusible polythene film on both surfaces over and including 0.3 litres / Sqm bituminous primer confrming to IS-3384 and applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 litres / Sqm each layer complete as per manufacturer's instructions and all as specified and directed . The weight of APP membrane shall not be less than 3.5 Kg / Sqm and laid over and including primed surface by using LPG/Butane torch and apply uniform pressure with roller. The overlap of membrane shall be 100 mm on sides and 150mm on end laps and complete all as specified and directed. Notes: (i) The work shall be executed only through authorised applicator of manufacturer as approval by GE. (ii) Contractor has to submit guarantee of treatment for 10 Years. (iii) Rates are inclusive of cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm Complete all as specified and directed. Make :- Super Thermolay APP PL of STP Ltd, Hyperlas of M/s IWL India Ltd, Hydrostop of M/s Tiki Tar Dansoa (India) Ltd, Torchat of M/s Torchtar membranes & bitumen products Pvt Ltd, M/s Fosroc Chemicals, Asian Paints Smartcare APP membranes of M/s Asian Paints Ltd.

Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for rendering 10mm thick cement plaster in CM 1:6 on other than fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all specified and directed by the Engineer-in-Charge.

Material and labour for Rendering 15mm thick in cm 1:4 on brick/concrete sufaces finished even & smooth using extra cement using liquid water proofing compound per mfg instruction complete all as specified and directed. Note : Water proofing liquid will be measured and paid separately.

Material and labour for 5 mm thick plastering in CM 1:3 on ceiling and finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over and including a coat of primer and minimum average 3 mm thick wall care putty complete all as specified and directed.

Material and labour for applying Two or more coats on brick or concrete surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and labour for Preparing new surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Material and labour for Preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

Supply and fix 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

Supply and fix flush shutters 35 mm thick solid core construction both side non decorative, factory made shutter made as per IS 2202 (Part I 1999) and shall be ISI marked, styles and rails shall be without any joint and be made of any non-coniferous timber hard wood (hillock / mirantee/ BOSUM / BEN TEAK) with moisture content not more than 12% and dimension as given in IS Code. The face panel comprising of plywood or crossband and face veneers shall be glued by hot pressed process. Overall finished thickness of face panel shall not be less than 3 mm while thickness of face veneer shall not be less than 0.6 mm complete all as specified and directed. Bllock board core shall fully confirm to the requirement specified in the IS code. All timber used shall be well seasoned and chemically treated. Adhesive shall be phenol formaldehyde synthetic resin BWP type specified in IS-848-2006. All dimensions shall be finished dimension & manufacturer certificate for test specified in IS : 2202 (Part-I) shall be rendered complete all as specified and directed.

Supply and fix double shutter Steel window side hung shutters including box type hinges with steel handle and steel pegs stay complete with glazing bars and fly proofing complete all as specified and directed.

Material and labour for preparation of new steel surfaces over 10 cm width or girth applying one coat of red oxide and two coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and directed.

Material and labour for cement concrete type B -1, 1:2:4 (20mm graded crushed stone aggregate) 100 mm thick as in hardstanding complete all as specified and directed.

Material and labour for Forming 12mm thick Expansion joints filled with and including pre-formed bituminous filler and top 30mm primed and sealed with and including sealing compound, Grade `A' thickness of slab 100mm complete all as specified and directed.

Taking down copper/aluminium flame proof point wiring Steel conduit pipe (light, fan, socket or power) complete, including switches, sockets etc. and making good disturbed surface of walls, floors, etc complete all as specified and directed.

Taking down copper/aluminium flame proof sub main wiring in Steel conduit pipe any type complete, including and making good disturbed surface of walls, floors, etc complete all as specified and directed.

Taking down unserviceable FLP tube light fitting / wellglass fittings complete all as specified and directed.

Taking down flameproof SSC single phase / three phase complete all as specified and directed by Engineer-in-charge

Taking down unserviceable FLP DB any size complete all as specified and directed.

Supply and fix PVC FRLS Armoured Copper cable of 1.5 sqmm x 3 core including saddling on wall / surface complete all as specified and directed.

Supply and fix PVC FRLS Armoured Copper cable of 2.5 sqmm x 3 core including saddling on wall / surface complete all as specified and directed.

Supply and fix PVC FRLS Armoured Copper cable of 4 sqmm x 4 core including saddling on wall / surface complete all as specified and directed.

Supply and fix Flameproof switch of LM 6 body, rotary switch, SP, 16 Amps for ON / OFF light / fan point to operate on single phase 230 Volts, AC CMRI certified IS-2145 complete all as specified and directed. Make:- Shyam Switchgear Cat part No. SSPL/2C/2010/ Sudhir / Baliga

Material and labour for flameproof switch socket combination suitable for 2P+E 16 Amps, 250 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge. Make:- Shyam Switchgear Cat Part No. SSPL/2C/2010/ Sudhir / Baliga

Supply and fix flameproof switch socket combination suitable for 4P+E 32 Amps 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge. Make:- Shyam Switchgear Cat Part No. SSPL/2C/2010/ Sudhir/ Baliga

Supply and fix flame proof, weather proof Tubelight LED for 2X18 / 20W with lumen out put not less than 4000 Lumens fittings,body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flame proof clear glass tubing to house LED fluorscent tube along with suitable integrated electronic drivers; complete including 2 x 18/20 W LED fluorescent tube fixed to wall / roof including necessary fixing arrangments CMRI approved and connecting up completely all as specified and as directed. Make:- Sudhir / Shyam Switchgear / Baliga

Supply and fix Flameproof LED Well Glass Light Fitting suitable for 45 Watt, product in Aluminum Die casted alloy LM6 IP rating - IP66 of Gas Gr. IIA, IIB Certified by CIMFR Dhanbad with ISI marking with and including all accessories, Led chip, lamp, Driver holders Heat Resistant Clear Toughened ‘Type‐ A’ Glass etc internally prewired complete all as directed and specified. Make:- Shyam Switchgear Cat Part No. SSPL/1233/ Sudhir / Baliga

Supply and fix flameproof exhaust fan of size 300mm with louvers single phase 240Volt, 0.5 HP, 1414 RPM complete all as specified and directed. Make : Shyam Switchgear Cat Part No. SSPL/MT/140/ Sudhir/ Baliga

Supply and fix Flame proof Distribution panel board made out LM6 material and high stencil stell hinges and nuts Incomer 100 AMPS TPN MCCB and out going MCB TP 20 to 32 Amps-4 nos , MCB TP 63 Amps-1 no, MCB SP 16 A- 4 nos and MCB SP 3 A - 4nos complete all as specified and directed. Make:- Sudhir / Shyam Switchgear / Baliga

Supply and fix Double compression Brass gland Chromium plated of 3/4 inch size complete all as specified and directed.

Supply and fix Double compression Brass gland Chromium plated of 1 inch size complete all as specified and directed.

Supply and fix Double compression Brass gland Chromium plated of 11/4 inch size complete all as specified and directed.

Supply and fix GI cable tray size 100mm x 50mm complete all as specified and directed.

Supply and fix FLP junction box LM6 material 100mm entry 4 way complete all as specified and directed. Make : Shyam Switchgear Cat Part No. SSPL/JB/105/ Sudhir/ Baliga

Material and labour for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below normal ground level connected to galvanised strip 32mm x 6 mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 using 40mm graded crushed stone aggregate chamber including necessary formwork / mould for fair and even surfaces, precast RCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate chamber cover slab, GI funnel, with GI watering pipe 20 mm bore medium grade, wire mesh,with protection pipe 40 mm bore GI pipe light grade for earth lead upto 7.50 m long including salt and charcol etc testing complete all as specified and directed by Engineer-in-Charge.

Supply & fix Aluminium strip 25mm x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground level fixed on walls / roof with all necessary fixing arrangements complete all as specified and directed including dismantling taking out old aluminium strip. Note :- Epoxy base insulator and PCC block only will be measured and paid seperately.

Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including, 3 NOS, 8mm dia 25mm long hex, head screw complete all as specified and directed including dismantling taking out old inspection box.

Supply and fix galvanised iron strip 32mm x 6 mm burried in ground or fixed on wall with all necessary fixing arrangements complete all as specified and directed including dismantling taking out old galvanised iron strip. Note :- 1) Epoxy base insulator only will be measured and paid seperately. 2) All GI strip joints should be butt welded atleast 50 mm long.

Supply & fix Air termination, single pointed aluminium rod 12mm dia and 300mm long with provision of GI pipe of 40 mm dia of 1 metre length for supporting air termination rod with all necessary fixing arrangements including dismantling taking out old air termination complete all as specified and directed.

Material and labour for PCC block of size 150mm x 150mm x 150mm in PCC (1:3:6) type C-1 with 20mm stone graded crushed stone aggregate for fixing on roof conductor / air termination rod / GI strip etc. complete all as specified and directed including dismantling taking out old PCC block.

Supply and fix earth pit indicator made out of MS sh\eet of 16 SWG of size 30cm x 20 cm welded to angle of size 25mm x 25mm x 3 mm at a height 1 Metre above ground including dismantling taking out old earth pit indicator complete all as specified and directed.

Material and labour for epoxy base insulator of suitable size, 35mm height fixed on PCC blocks/ wall or MS angle/ Pipe or on towers with and including nut bolts and washers etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix inspection boxes / test point boxes 250mm x 150mm x 100 mm made out of 16 gauge MS sheet with top cover including provision of fixing of 2 Nos epoxy insulator with and including insulating PVC sheet for incoming and outgoing copper strip for proper insulation etc complete all as specified and directed.

M/S NILESH BUILDERS

M/S SAMRUDHI CONSTRUCTION

S.K.HARAL

AJAY ENTERPRISES

R. K. Industrial Fabricators

Rays Breakers