REPAIR AND MAINT OF ROAD INCLUDING ROAD FURNITURE IN RESIDENTIAL AREA AT CAD PULGAON

Amount

Material and Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm complete all as specified and directed.

Material and Labour for applying evenly a priming/tack coat with bituminous primer over black top surface at 5 kg per 10 sqm using paving bitumen complete all as specified and directed.

Material and Labour for preparing old black top surfaces and applying evenly a priming/tack coat with bituminous primer at 10Kg per 10 Sqm complete all as specified and directed.

Material and Labour for bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and directed. Note: The work shall be executed by using hot mix plant & mechanical paver.

Material and Labour for 50mm thick (consolidated thickness) premix bituminous macadam laid/rolled & compacted to required gradient and camber using paving bitumen rolled with 8 to 10 tonne power roller complete all as specified and directed.

Repairs to pot holes exc 30mm depth not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder with 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again welll rammed rolled with power roller 8 to 10 tonne capacity complete all as specified and directed.

Surface dressing not exc 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Spreading moorum/ red bajri in road berms, 75mm spread thickness rolled and consolidated to gradient and camber required with light roller of capacity not less than 0.5 tonne complete all as specified and directed.

Material and Labour for preparation of road surface and applying thermoplastic reflective paint in marking minimum 2.5mm thick single coat as in centre line and edge line road marking of 100 mm width using HOT MARK thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter filler thermoplastic requirement for glass beads shall be the table No.800.40 of MORTH specification including spraying of glass beads etc. all as per manufacturer's instruction complete all as specified and directed.

Supply and fix road stud 110 x 128 x 29.5mm aluminium alloy die casted dynamically designed to bear impact load upto 25 tonne and fixed with 2 Nos eye bolt each on both side including taking down old one complete all as specified and directed.

Supply and fix solar stud 125x125x25mm (model DA 110-DHRUV of SINOR Infrastructure or equivalent in 3M) made from aluminium alloy and construction solar powered by nionocrystal solar panel with rechargeable battery of type -I high capacity Ni-Cd with view distance of approximate 1000mtr LED - 10mm three pieces on each side are used for high brightness of different colour back up 12 hours of continuous lighting at night including taking down old one complete all as specified and directed.

Supply and fix in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastometer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed.

NOTE : SCHEDULE OF CREDIT (Amount on page No 33 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.)

M/S L M Chourasia (BID ID -3032698)

Chintamani Constructions (BID ID -3029785)

M/S JAI BHAWANI CONSTRUCTIONS (BID ID -3033682)

Bidder Name

M/S L M Chourasia

M/S Ramakant Chourasia

Chintamani Constructions

M/S JAI BHAWANI CONSTRUCTIONS