Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAccepted-AOC 36 THE MALL FEROZEPUR CANTT 152001 | FEROZEPUR CANTT | FEROZEPUR | PUNJAB | 152001 | L1 | Accepted-AOC Lowest Bid | |
| 2 | L2₹14.0 L+₹1.2 L (9.14%)Rejected-Finance | L2 | Rejected-Finance Higher Bid | |
| 3 | L3₹14.5 L+₹1.7 L (13.2%)Rejected-Finance | L3 | Rejected-Finance Higher Bid | |
| 4 | L4₹14.6 L+₹1.8 L (13.9%)Rejected-Finance | L4 | Rejected-Finance Higher Bid |
Tender Value
Refer Docs
EMD Value
₹26,400
Closing Date
19 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Ferozepur Cantt
HQ CWE Ferozepur Cantt
CWE/FZR- /2021-22 Construction of temporary storage accn under GE (East) Ferozepur Cantt
2022_MES_514197_2
CWE/FZR-43/2021-22
Open Tender
Civil Works
Item Rate
180 days
Ferozepur Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (East) Ferozepur
₹26,400
Yes
10 Jun 2022
28 Apr 2022
27 May 2022
28 Apr 2022
19 May 2022
6 May 2022
60 days
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation and getting out in soft/loose soil complete all as specified.
M&L PCC 1:4:8 type D2 ( using 40mm graded stone aggregate ) as in foundations, filling and mass concrete etc complete all as specified and directed.
M & L Reinforced cement concrete (M 25 Design Mix) using 20mm graded aggregate as in foundation footing and rafts complete all as specified and directed
M&L Reinforced cement concrete (M-25 Design Mix) 20mm graded aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and directed.
M & L Reinforced cement concrete (M 25 Design Mix) 20mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed
M&L for 40mm thick DPC of Plain Cement Concrete, (1:2:4) type B-0 incl necessary formwork required complete all as specified
M&L Form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits ( if any) of foundations and plinth beams and similar work, vertical or batter etc rough finished surfaces of concrete complete all as specified and directed.
M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc fair finished surfaces of concrete complete all as specified and directed.
M&L for form work for pillar, post, struts, piers, columns etc fair finished surfaces of concrete complete all as specified and directed.
M&L TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
M&L TMT bars 5mm dia & over as in stirrups, binders, spacers etc complete all as specified and directed.
M&L brick work with sub class 'B;' bricks straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.
M & L rendering 15mm thick plaster in CM 1:6 on fair faces of brick work/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.
M & L rendering 15mm thick plaster in CM 1:4 on fair faces of brick work/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.
M&L applying three coats of whitewash of new platered surfaces of wall, complete all as specified and directed.
M & L two coats of cement base paint over one coat of cement primer on walls including preparation of surface complete all as specified and directed.
M&L brocken stone boulders hardcore of gauge not exceeding 63mm deposited, spread and leveled in layers not exceeding 15cm thick watered and rammed to a true surfacecompleted all as specified and directed.
M&L for 100 mm thick cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in flooring, complete all as specified and directed.
M&L non skid ceramic tiles 7 to 8mm thick , white (Square or rectangular) of area of each tiles exc 0.06 sqm but n.exc 0.11 Sqm each for surfaces such as floor etc set and jointed in cement slurry over & including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles completed all as specified and directed.
M&L non skid ceramic tiles 7 to 8mm thick , white (Square or rectangular) of area of each tiles exc 0.06 sqm but n.exc 0.11 Sqm each such as in skiiting/dado etc set and jointed in cement slurry over & including 10mm thick rendering in cement mortar (1:3) and pointed in white cement with pigment to match the colour of tiles completed all as specified and directed.
S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drg No CE JZ/TD-06/07 & CEJZ/TD-07/07, including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified
S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drg No CE JZ/TD-06/07 & CEJZ/TD-07/07, including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified
S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders, framed balusters, walk ways, railings, framework of water tanks and similar work, complete all as specified.
S&F Factory made box type steel ventilator fixed type complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drg No CE JZ/TD-06/07 & CEJZ/TD-07/07, including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified
S&F 3mm thick sheet glass ordinary quality and glazing with putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
All as per srl item No 26 above here-in-before bur frosted glass complete all as specified and directed.
S & F Galvanized mild steel wire cloth 0.56 mm noninal dia of wire and average width of aperture not more than 1.8 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 165 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.
S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 105 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.
S & F factory made 30mm thick second class HW plain framed panelled shutter (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail & stile as per SI-1003 (Pt-I) kin seasoned and chemically pressure treated for anti termite treatment incl a coat of primer complete all as specified and directed.
S & F factory made 35mm thick second class HW plain framed skeleton shutter (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail & stile as per SI-1003 (Pt-I) kin seasoned and chemically pressure treated for anti termite treatment complete all as specified and directed.
S&F mild steel butt hinges medium weight cold rolled size 100mm complete all as specified and directed.
S&F 200mm mild steel semi barrel tower bolt, open cover with sheet pressed barrel, stove enamelled black with bright not complete all as specified and directed.
S&F 300 mm aluminium sliding handles oval type stove enamelled black complete all as specified and directed.
S&F 300 mm mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
S&F 125 mm mild aluminium handles oval type stove enamelled black complete all as specified and directed.
S&F 150mm mild steel pressed handles oval type stove enamelled black complete all as specified and directed.
M&L preparation of new wooden or wood based surfaces of any description over 10cm in width or grith not otherwise described and applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L 50mm thick PCC 1:3:6 type C-2 (with using 40mm graded stone aggregate) as in plinth protection,concrete surface finished even & smooth without using extra cement including construction joints completed all as specified and directed.
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of E-250 (Fe 410-W), including fabrication, errection and fixing, complete all as specified.
M&L for plain MS flat iron Fe-410 for wind tie etc of any size as required complete for roof covering work and purlin etc as required and directed
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.
M&L preparation of new steel surfaces of any description over 10cm in width or grith not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description over 10cm in width or grith not otherwise described and applying two coats of synthetic complete all as specified and directed.
M&L preparation of new steel surfaces of any description n exc 10cm in width or grith not otherwise described and applying two coats of synthetic complete all as specified and directed.
Returning, filling in including speading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.
Removal of surplus soil not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
Earth filling under floor speading and leveling in layers not exceeding 25 cm thick each layer including watering and well ramming complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base etc, completed all as specified and directed.
S&F 60 mm thick (M-35 Grade) factory made, machine pressed,precast cement concrete interlocking paver block any shape with grey cement and no pigment, confirming to IS-15658:2006, set and joints grouted in fine sand, laid over and including 25 mm thick layer of sand cushioning complete all as specified and as directed.
M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia )duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for One light/fan/bell/exhaust point controlled by one single pole one way switch.
All as per item 53 above, but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .
All as per item 53 above, but One 3 pin 5 Amp socket outlet point controlled by one switch on same board.
All as per item 53 above, but one switch socket outlet multi purpose, 3 pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified.
S&F Switch piano, single pole, one way, 6 Amps, 240V, 50HZ, ISI marked, complete all as specified.
S&F Switch piano flush type 20 Amps, single pole, one way,ISI marked, complete all as specified.
S&F Socket outlet,2 in 1, 5 pin ,6 Amp, (IP20), ISI marked, complete all as specified.
S&F Socket outlet 2 in 1, 6 pin, 20 Amp, piano flush type,ISI marked, complete all as specified.
S&F Ceiling rose, surface type, 240 volts, 50 HZ, 6Amp, backelite 65mmx50mm, 3 terminals complete all as specified.
S&F rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size,240 volts,6 Amps, 100 W deluxe, complete all as specified.
S&F ceiling fan 1200mm sweep, AC single phase 230 Volts 50 HZ including three core FR PVC insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/Green is from earthing sheath colour is Black of cable size 23/0.0076, complete all as specified.
S&F 20W, 6000 K, 4 feet LED square tube light fitting, energy efficient, fixed to walls/ ceiling etc complete, complete all as specified.
S&F bldg LED Security light fittings 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of size 25mm nominal bore, suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS flat duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements on wall including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed.
S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, VTPN DB with 200 Amps rated bus bar, 4 way, FP-42 protection surface mounting, 415 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made, including MCCB adjustable thermal & fixed magnetic type, 4 pole, 100 Amps, 50 Hz, 415 volts with rupturing capacity 16 KA and making good disturbed surfaces with matching colour, complete all as specified.
S&F for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x6 Sqmm single core 650/1100 V, drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:-Two runs of cable,1 run of earth wire & one run of PVC conduit shall be measured as one length.
S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 4 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made, and making good disturbed surfaces with matching colour, complete all as specified.
S&F MCB, SPN, 40 to 60 Amps, 240 volts 10 KA 'C' series, complete all as specified.
S&F MCB, single pole, 240 Volt, 6-32 Amps,10 KA 'B' series, complete all as specified.
S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, with aluminium multistranded conductor, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .
S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps, socket & elbow etc,and taking out existing pipe, complete all as specified.
M& L Earthing complete, all as shown on electrical plate No 3 of MES schedule part-I, and as specified including the following :-(i) Galvanised steel earth plate of size 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level.(ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer).(iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc.(iv) 15 mm bore light grade, GI pipe for protection to earth-strip.(v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces.(vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed.
KAILASH CONSTRUCTION COMPANY
JAWAHAR CONSTRUCTION COMPANY
CHETAK CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .