REPAIR TO HARDSTANDING PATH PARKING SHED AND BOUNDARY WALL WITH ALLIED SERVICES IN CAMERO COMPLEX AT AF STATION SUBROTO PARK

Amount

M&L for demolition of Cement Concrete in ground floors & pavings n.exc. 15 cm thickness (below or above ground level) (unreinforced) including removal from site and disposing away complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick PCC type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base for floor finishes complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick cement concrete 1:3:6 type C2 (40 mm graded stone agg) as in plinth protection/path finishing cement concrete surfaces even and smooth with out using extra cement complete all as specified and as directed by Engr-in-Charge.

M & L for providing cement concrete 25mm thick type B1 (1:2:4) (20mm graded aggregate) as in floor to receive the floor finishes complete all as specified and directed by Engineer-in-Charge.

Demolition of pressed precast concrete paver block/chequred tile complete and removing the debris out side MD land all as specified and as directed by Engr-in-Charge.

M&L for sand filling under floor or in foundation including watering & consolidation complete all as specified and directed by Engineer-in-Charge.

S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed by Engineer-in-Charge.

M&L for Chequered cement concrete coloured tiles 20-25mm confirming to IS -1237 (rubber form moulded)any size in floorsetc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) complete all as specified by Engr-in-Charge.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar and removing serviceable tiles to store and rubbish off the permises out side MD land complete all as specified and as directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

All as per item Ser No 10 above but as in riser of steps skirting dado and pillar over 10 mm back coat in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.

M&L dismantling of exsisting old precast concrete block as kneelers, apex stone, curve stones and refixing the same as directed set & jointed in CM 1:4 including 5mm thick rendering in CM 1:3 for fair & smooth finish surface complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B-1, using 20mm graded stone aggregate precast concrete block as kneelers, apex stone, curve stones of size as directed set & jointed in CM 1:4 including 5mm thick rendering in CM 1:3 for fair & smooth finish surface complete all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlarfacings, dressed stonework and precast concrete articles complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 all as specified and as directed by Engr-in-Charge.

M&L for brick work with sub class 'B' brick , half brick thick wall built in CM 1:4 straight or curved on plan to any radius with old size bricks complete all as specified and as directed by Engr-in-Charge.

Taking down cement or cement lime plaster of any description on brick/stone or concrete surfaces etc including raking out joints,hacking for key and scrubbing down with water upto 4 storeys building complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces including finishing surface even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge upto 4 storied building

M&L for 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newely plastered or unplastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparing newly plastered or un plastered surface of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surface and applying two coat of distemper on wall complete all as specified and directed by Engr-in-Charge.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.

S&F non skid coloured ceramic tiles area of each tiles exceeding 0.11sqm but not exceeding 0.18 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

All as Ser No 24 above item but as in skirting over 10mm thick backing coat of cement plaster in CM (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L coloured/printed glazed ceramic tiles area of each tiles exceeding 0.06sqm but not exceeding 0.18 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match the colour of tiles incl 10mm thick rendering in CM 1:4 and pointed with coloured cement to match the colour to tiles complete all as specified and as directed by Engr-in-Charge.

Dismantling structural steel work etc complete all as spcified and as directed by Engr-in-Charge.

S&F steel/work in tubular truses, purlins, rafters, struts, vertical members and similar work including special shape washers complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 grade St-240 complete all as specified and as directed by Engr-in-Charge.

M&L Preparation of steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate,complete all as specified and as directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in Soft/disintegrated, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:3:6 Type C2 using 40mm stone aggregate in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed by Engr-in-Charge.

S&F Colour coated galvalume aluminum zinc coating GI based corrugated/ style pattern steel sheet 0.50mm thick fixed to steel frame using L or J bots with washer in roofs including making good joint frame and sheets, complete all as specified and directed by Engr-in-charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground (Posts embedded in, Concrete, brick work, masonry, etc.) complete all as specified and as directed by Engr-in-Charge.

Dismantling fencing wire mesh, any type complete all as specified and as directed by Engr-in-Charge.

M & L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Supply only chain link MS galvanised fencing any size any type, complete all as specified and as directed by Engr-in-Charge.

Fixing only chain link fencing incl line wire any mesh, any size to any type of standard rails, straining bolts etc incl provision of binding wire complete all as specified and as directed by Engr-in-Charge.

S&F 10mm dia , 50mm long MS screw bolts (machine made) with hexagonal or square head at one end and screwed the other, each screwed end to be fitted with washers and one heaxagonal or square n.exc 5cm long complete all as specified and as directed by Engr-in-Charge.

M&L for mild steel round bars 10mm dia & over cut to length, bent to shape required including cranking, bending etc. complete as in rungs, steps Fe-410-W (Gde.E-250) quality -A 0r Fe290 (gde E-165) all as directed by Engr-in-Charge

J D ENTERPRISES

M/S MG GROUP

High Tech Metal India

M/S PRADEEP ENTERPRISES

Hindustan Co.Co

deepankar trading co.

Rishi Constructions

Ashish Sehgal and Co.