Supplying, Installing, Testing and Commissioning of 125 KVA Diesel Generator set for KPTCL, Human Resource Development Centre at Hoody, Bengaluru.(Call-3)

Supplying, Installing, Testing and Commissioning of 125 KVA Diesel Generator set for KPTCL, Human Resource Development Centre at Hoody, Bengaluru.(Call-3)

UG CABLE 1.1 KV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Sheath Armoured Aluminium LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as ...

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Laying of 11 kV cables in existing trench/G.I. pipe/stoneware pipe/RCC hume pipe using wooden/aluminium rollers as directed by KPTCL staff 95 sqmm to 150 sqmm ( Pg No 194,Sl No 22(c)(i) of KPW...

End Termination Supplying and making end termination with brass Double compression gland and copper lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV ...

Copper Control Cables(Sensing Cable)SupplyIing, laying and connection of PVC insulated, steel armoured 1100 V Grade Copper Conductor cables. a) 4C x 4 sq.mm (Pg No 112, sl no 13.7 & Pg No 194, Sl no ...

END TERMINATIONS FOR ABOVE

Supply and fixing of end termination

a) 4C x 4 sq.mm. (Supply and Installation) (MR).

Earthing Grounding of Equipements including cost of 40mm dia 2.5 mm thick, Class C G.I. Pipe of 2.5 meters length as per specifications, with 50 X6 mm GI Flats 2.5 Mtr Long, Salt and Charcoal, includi...

Body Earthing - 25 x 3 mm GI stripe with sleeves, bolt nuts and double washers. (Pg no 471, sl no 12.58.2 of KPWD CSR Vol-6 2023-24).

Neutral Earthing - 25 x 3 mm GI stripe with sleeves, bolt nuts and double washers. (Pg no 471, sl no 12.58.2 of KPWD CSR Vol-6 2023-24).

Distribution Panel alteration work (MR)

Exhaust System (JOB WORK)

Supply, fixing, receive at site, store, unpack, assemble and connect exhaust pipe with 4" dia 100 mm thick Class B MS pipe with flanges, fire fly gaskets, hardware, glass wo...

Aluminium insulation cladding for 4" exhaust pipeline with 1" mineral glass wool wrapped and ms chicken mesh tightened and above aluminium sheet rolled and wrapped and tightened with screws. ...

Supply for First fill of lube oil (Castrol / HPL / IOCL) and diesel of required capacity (MR)

DIESEL GENERATOR SET Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as ...

Double Contactor AMF Panel Supply, Erection, testing and commissioning of AMF panel suitable for 125 KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undr...

PART-B CIVIL WORK Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, bar...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( Pg No 9, Sl No 5.4 of KPWD SR 2023-24 Vol-2).

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...