SPL REPAIR TO 05X ROLLING SHUTTERS AND ROOF TREATMENT OF MT STORE ,SPECIAL REPAIR OF ROOF TREATEMENT TO BLDG NO P-325 (MES STORE) , SPECIAL REPAIR TO BASKET BALL GROUND AT UNDER GE(S) JAIPUR

Amount

Job No :- 01/SR/61SA/BLDG/2021-22/Q3W Taking down cement plaster, any description on brick or stone walls, etc. incl. raking out joints, hacking for key, scrubbing down with water, etc. 01/SR/21-22 - 450 07/SR/2-22 - 360

M&L rendering 15 mm thick on brick masonary surface or surface or other surface fair face of brickwork in CM (1:6) 01/SR/21-22 - 200 07/SR/2-22 - 150

M&L rendering 15 mm thick on brick masonary surface or surface or other surface fair face of brickwork in CM (1:4) 01/SR/21-22 - 150 07/SR/2-22 - 150

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling 01/SR/21-22 - 100 07/SR/2-22 - 60

M & L for preperation of newly plastered surfaces of wall and applying three coats of white wash on walls complete all as per direction of engineer in charge

M & L for prepeation of new plastered surfaces of wall and Applying two coats of cement base paint white or tinted on wall surfaces complete as per directed by engineer in charge

M & L for preperation of new plastered surfaces of ceiling and Applying three coats of white wash on ceiling surface complete all as specified and directed by engineer in charge

M & L for preperation of old painted surfaces of wall and Applying two coats of cement base paint white or tinted on wall surfaces completed all as per specified and directed by engineer in charge 01/SR/21-22 - 500 07/SR/2-22 - 150

M & L for preperation of old painted surfaces of ceiling and Applying three coats of white wash on ceiling surface complete all as specified and directed by engineer in charge 01/SR/21-22 - 200 07/SR/2-22 - 60

M & L for preperation of old painted surfaces of wall and applying three coats of white wash all as specified and directed by engineer in charge 01/SR/21-22 - 350 07/SR/2-22 - 150

Taking down Chowkats or frames exc 1.5 sqm bur not exc 4 sqm each with shutters (without taking of shutters from the frames)

35mm thick IInd class hard wood factory made plain, framed, panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated.

Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface

Applying two coats of synthetic enamel paint over a coat of zinc chrome primer on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface 01/SR/21-22 - 400 13/SR/2-22 - 30 17/SR/21-22 - 25

S&F Butt hinges 100 mm size medium weight cold rolled mild steel.

S&F Mild steel barrel tower bolt 150 mm long stove enamelled black with bright bolt

S&F Mild steel pressed handles 125 mm size oval type stove enamelled black

Mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with & including a minimum of 6 bolt & nut four on bolt plate & 2 on staple plate & fixed length of bolt 300 mm

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

Demolition of cement concrete ground floor and paving n exc 15cm thickness (Below or above ground level) 01/SR/21-22 - 15 07/SR/2-22 - 4 13/SR/21-22 - 29.5 17/SR/21-22 - 28.75

M/L for 75 mm thick PCC type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base to floor

M/L for 40 mm thick PCC type B-1 (1:2:4) using 20 mm graded stone aggregate as in floor finished even and smooth and making impression of expended metal, while the concrete is green complete

Dismantling of old rolling shutters/ structural steel work of any description complete all as specified

Supply and fixing of 1.25 mm thick rolling shutter without ball bearing as specified including top cover anchoring rod , hasp and stapple and one shop coat of primer , errected in position as indicated complete, with gear operated type with bevel gear box and crank handle complete all as specified.

Safety lever lock mild steel with 4 levers for rolling shutters

Ball bearings for rolling shutters

Supply and fixing of steel windows with side hung shutter including projecting type hinges with steel handle , and steel peg stay , complete with glazing bars devetailed or welded including taking down of old window.

M&L 50 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection 01/SR/21-22 - 70 07/SR/2-22 - 50

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge. 01/SR/21-22 - 8.75 07/SR/2-22 - 2.5

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25 mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement. Note:- WPC Shall be measured and paid saperately 01/SR/21-22 - 350 07/SR/2-22 - 100

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.0 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions 01/SR/21-22 - 350 07/SR/2-22 - 100

M&L applying one coat of alluminium paint on surface of any description wood,steel,iron, concrete,brick , stone etc exc 10 cm in width or girth, application of paint shall be as per manufacturers instructions. 01/SR/21-22 - 350 07/SR/2-22 - 100

Supply only Integral waterproofing compound 01/SR/21-22 - 40 07/SR/2-22 - 20

Demolition of RCC concrete of any description (reinforcement cut as required to facilitate demolition)

RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in lintle bands and shelves complete all as specified and directed by Engr in charge

PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate ) as in roof kerbs rounded or chamfered on edges

Form work to sides and soffits of lintle beams / shelves complete all as specified and directed by Engr in charge

M&L for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as in lintle bands complete.

All as per item no 39 above but 8 to 10mm dia as stirrups /spacers

Demolition of Brick work built in cement mortar complete all as specified and directed by Engr in charge

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4)

M&L Brickwork with subclass `B' bricks, straight or curved on plan any radius in half brick thick wall, built in CM (1:4)

Job No :- 07/SR/61SA/BLDG/2021-22/Q3W Hacking out old broken glass pane (any thickness, size, quality/ description) from metal/wood frame including punching or drilling out old glass panes, pins, springs, clips & providing & fixing new ones 3 mm thick plain sheet glass ordinary quality in square not exceeding 0.50 Sqm in each pane. glazed with oil putty.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded crushed stone off as in sub base of floor / hard standings all as specified.

M&L 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone agg) as in floor finishes of water tank finished even and smooth without using extra cement complete

M&L precast interlocking tiles with of 60mm thick M 35 grade epoxy coated set, jointed and pointed in dry sand laid over and including 25mm thick sand cushion complete all as directed by Engr-in-Charge.

M&L precast cement concrete block or slab 150mm thick 1:2:4 type B1 using 20 mm graded stone aggregate with plain or inter locking joints and set in CM 1:6 kerbing/edge block or hard standing /footh including necessary earth work 07/SR/21-22 - 0.50 13/SR/21-22 - 5.00 17/SR/21-22 - 2.50

Job No :- 13/SR/61SA/BLDG/2021-22/Q3W M&L for PCC 1:3:6 type C2 using 40 mm graded stone agg as in fdn filling and mass concrete for post holes 13/SR/61SA/BLDG/2021-22/Q3W - 4.5 17/SR/61SA/BLDG/2021-22/Q3W - 4.0

Dismantling of pipe as in post holes and including demolition of PCC in foundation and necessary excavation and earthwork complete all as directed by Engineer in charge. 13/SR/61SA/BLDG/2021-22/Q3W - 2 17/SR/61SA/BLDG/2021-22/Q3W - 2

M&L for 50 mm thick PCC1:2:4, Type B0 using 12.5mm graded stone aggregates, as in floor finished even and smooth using extra cement 13/SR/61SA/BLDG/2021-22/Q3W - 590.00 17/SR/61SA/BLDG/2021-22/Q3W - 575.00

Polythene sheet , black 50 micron all as directed by Engineer in charge. 13/SR/61SA/BLDG/2021-22/Q3W - 590.00 17/SR/61SA/BLDG/2021-22/Q3W - 575.00

M & L for Synthetic all weather Acrylic surface cushion system , 5 layers of basket ball court with following specifications :- Ist layer Applying acrylic resurfacer mixed with approved grade of silica sand , cement and water and applied with rubber squeege @0.25 Ltrs per sqm. IInd layer : SBR granules mixed with rebound liquid rubber resin and water @2.25 Ltrs per sqm. IIIrd layer: SBR granules mixed with rebound liquid rubber resin and [email protected] Ltrs per sqm, IV th layers: UV resistant rebound acrylic colour of approved shade mixed with silica sand and water @0.25 Ltr per sqm. Vth layer: UV resistant rebound Acrylic colour of approved shade mixed with silica sand and water @0.25 Ltrs per sqm. Note : (i) The synthetic all weather acrylic surface cushion system - 5 layers shall be laid as per manufacturer specifications.The synthetic surface shall be non abrasive, non slippery, non glare, non colour fading, maintenance free and shall remain unaffected by extreme weather condition or by ultra voilent rays. (ii) Marking of court lines shall be done with different colour aas per Indian Standard/Sports Authority of India specifications. (iii) The material for marking of court lines shall be as per Indian Standard/Sports Authority of India Specification and suitable for acrylic synthetic surface and shall be got prior approved from GE. 13/SR/61SA/BLDG/2021-22/Q3W - 590 17/SR/61SA/BLDG/2021-22/Q3W - 575

S & F Acrylic fibre shooting board for basket ball of size 1.80m x1.05mx 25 mm thick including steel beading on edges of acrylic fibre board and proper marking on arcylic fibre board with 16mm dia ring inclu basket ball net made of Nylon 450 mm dia and 600mm depth fixed on mild steel round bar 16 mm dia on top inclu fixinf on fibre board with MS bolts complete. Make :- COSCO or any make followed by Sports Authority of India. 13/SR/61SA/BLDG/2021-22/Q3W - 1 17/SR/61SA/BLDG/2021-22/Q3W - 1

S & F MS pole heavy weight including all fittings like bolts, plates etc made to shape, fixing in ground all as directed by the Engineer in charge Complete.

M & L for preperation of new or previously untreated brick, stone, concrete or plastered surfaces of any description over 10cm width or girth and applying two coats of plastic emulsion paint over a coat of primer. 13/SR/61SA/BLDG/2021-22/Q3W - 85 17/SR/61SA/BLDG/2021-22/Q3W - 80

Job No :- 17/SR/61SA/BLDG/2021-22/Q3W S&F Mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc, including all necessary cuttings, drilling, bolting or riveting etc and including 10 mm MS bars as in tie bars fixed to fencing.

Supply & fixing chain link fencing including line wires, any mesh, size and type to any type of standards , rails, straining bolts, etc. including provision of binding wire.

M/S JALANDRA CONSTRUCTIONS

M/s Bhavesh Construction Company

ABHI CONSTRUCTIONS

J.J.ENGINEERING

S.R.Enterprises