SPL REPAIR TO HARD STANDING (VEH REPAIR BAY), CERTAIN BR WKS IN E/M INSTLN IN THE AOR OF AGE BR-III AND REPAIR TO FENCING, VIEW CUTTER, BOUNDARY WALL, RETAINING WALL ETC IN ZONE B IN THE AOR OF AGE BR-II UNDER GE864 EWS

Amount

M&L for brick work with sub class 'B' bricks (old size bricks), straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 completeincluding demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, surfaces to be prepared to even and smooth without using extra cement all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1 :6, surface finished even and smooth without using extra cement, including taking down old cement plaster from brick/stone work complete all as specified.

M&L for preparation of newly plastered or unplastered wall surfaces of walls with chalk whitening preparatory to distempering and applying two coats of distemper oil emulsion over one coat of suitable primer, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces rendering is to be finished to even & smooth (without using extra cement) including taking down old cement plaster from brick/stone work complete all as specified and directed.

M&L for preparation of new plastered or unplastered wall surface with chalk whitening and applying two coats of cement base paint over a coat primer complete all as specified and directed.

M&L for Complete removal of the existing treatment on walls by scraping and washing down with water and applying two coats of distemper oil emulsion over a coat of suitable primer over 1mm thick wall care putty on old surfaces of walls, complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for Pre Polished Machine cut Kota stone slab (Mirror finish) flooring 18-20 mm thick over and including cement screed bed of 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, over and including 25mm thick cement concrete 1:2:4 type B-0, (using 12.5mm crushed stone aggregate) as in levelling course in floors as sub bases etc. finishing surface of corcrete even and rough to receive the top layer, and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as specified.

M&L Pre Polished Machine cut Kota stone slab (Mirror finish) 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in CM 1:4, including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, and including roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L in repair for pre polished green marble work 18 to 20mm thick in steps, jambs, pillars, windowcills, cooking platforms, cupboards and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F for rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410 -W (Gde-E- 250) quality-A complete all as specified complete all as specified and directed.

M&L for welded steel wire fabric supplied and fixed complete to wood or steel members weight n.exc 4 Kg/Sqmincluding dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any all as specified and directed

M&L for painting of new steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of new surfaces, over a coat of red oxide primer and applying two coats of synthetic enamel paint (G+2 roofs) all as specified.

M&L for painting of old steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation by complete removal of paint,over a coat of red oxide primer and, applying two coats of synthetic enamel paint (G+2 roofs) all as specified.

M&L for glazed ceramic tiles in vertical surface of size 450mm X 300mm and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including dismantling floor, hearth or wall tilingincluding 10mm thick backing coat bedding in CM 1:4 all as specified.

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15mm thick in CM 1:6 over and including 25mm thick cement concrete 1:2:4 type B-0, (using 12.5mm crushed stone aggregate) as in levelling course in floors as sub bases etc. finishing surface of corcrete even and rough to receive the top layer andincluding dismantling floor, hearth or wall tilingincluding cement mortar bedding all as specified and directed

M&L for Vitrified ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick Screed bed or bedding layer in CM 1:4 for laying floor finishes including dismantling of floor tiles of any description complete all as specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, in skirting / vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick CM 1:3 including dismantling of wall tiles of any description complete all as specified and directed.

M&L for Second class soft-wood in scantlings wrought timber fixedincluding dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 including dismantling of plain or corrugated steel sheeting ,any gauge, thicknessincluding Nanital or similar pattern roof covering etc complete all as specified and directed.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etc including dismantling of plain or corrugated steel sheeting ,any gauge, thicknessincluding Nanital or similar pattern roof covering etc complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old plain sheeting ,any gauge, thickness all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley gutters, drip and straight flashings (length and girth as fixed) or in cladding to wall, fixed with self tapping screws including dismantling of old plain sheeting ,any gauge, thickness all as specified and directed.

Taking down shuttersof any description n.exc 1.0 sqm each complete all as specified and directed.

Taking down shutters any description exc 1 sqm and n.exc 2 sqm each all as specified and directed.

S&F factoy made 35mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass,gauze etc (but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass, etc sizes of members of shutters as specified in SSR Pt-I, Sec 8 Clause 8.20(a) and fitted to chowkats complete all as specified and directed.

S&F 75 mm long size steel butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S&F 100 mm long size aluminium handles,cast type,anodised complete all as specified and directed.

S&F 100 mm long (Length of bolt) Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F factory made 35mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass,gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass, etc sizes of members of shutters as specified in SSR Pt-I, Sec 8 Clause 8.20(a) and fitted to chowkats complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each paneincluding hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

M&L for 35mm thick factory made plain framed, panelled shutter(two panel) with lock rail (2nd class HW rail and style) and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 100 mm long size steel butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm long size aluminium handles,cast type,anodised complete all as specified and directed.

S&F 150 mm long (Length of bolt) Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm long (Length of bolt) Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete un-reinforceed in ground floor and paving n.exc 15 cm thickness( below or above ground level) complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in in foundations, filling and mass concrete to increase the height of floor level where required, complete all as specified and directed.

M&L providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, over and including for 100mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub floors,sub-base,etc.and finishing surface of concrete even and rough to receive the topping layer complete all as specified and directed.

M&L providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, over and including for 100mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub floors,sub-base,etc.and finishing surface of concrete even and rough to receive the topping layer complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-1( using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement and filling the construction joints with mastic filling complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm),including making drainage opening wherever required complete all as specified and directed.

M&L for 100mm thick cement concrete 1:2:4 type B-2( using 40 mm graded stone aggregate) as in floor/hardstanding etc finished cement concrete even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) Cement concrete in surface channels and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement,including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

S&F Steel rolling shutters of 1.00mm thick laths, with ball bearing, gear operated type with bevel gear box and crank handle, as specifiedincluding top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual typeincluding taking down chowkhats or frames (without taking off shutters from the frames) of size exc. 1.5 sq. m and n.exc 4 sqm each all as specified and directed.

S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F in repairs ball bearing for rolling shutters complete all as specified and directed.

Taking down steel rolling shutters of any size and type, with ball bearing, gear operated type with bevel gear box and crank handle as specifiedincluding top cover, anchoring rod, hasp and staple and erected in position as indicated after repairing complete all as specified and directed. Note : Accessories like safety lever locks, ball bearing etc be measured and paid separately in respective item.

S&F in repair vitreous china squatting pan 'Orissa' pattern long pan size 580 x440 mm white with integral foot rests (excluding cistern and flush pipe),including provision of cement concrete bedding complete all as specified and directed.

S&F in repair 10 liter capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, handle including brackets, 32mm dia flush pipe and connection to pipes complete all as specfied and directed.

S&F in repair Vitreous china wash basin white flat back size 580mm x 450 mm excluding taps waste chain and plug and porcelain stopper butincluding brackets any size,including cutting for and pinning in ends of bracketsincluding 15 mm bore CP centre hole mixer for mixing hot & cold water screwed down for iron pipe and waste pipe complete all as specified and directed.

S&F in repair Angle valve / Stop valve 15mm dia fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specfied and directed.

S&F in repair 15mm dia Bib taps, chromium plated fancy type,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F, in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F, in repair CP brass soap dish, heavy duty, fixed with chromium plated brass screws complete all as specified and directed.

S&F, in repair CP Towel Ring 200mm dia fixed with chromium plated brass screws complete all as specified and directed.

S&F, in repair CP steel grating 75/100mm dia, complete all as specified and directed.

Resecuring or easing & adjusting without taking down in the same opening of aluminium door/window shutters/partitionsincluding corner clamps and connected materials required for making serviceable condition all as specified and directed. Note : Aluminium sections if required to replace to be measured and paid separately in respective item.

M&L for aluminium anodised powder coated sections of approved and required size for door / windows frames or chowkats / partitions / shutters, sliding channels / tracks etcincluding jointing cleats, MS nut & bolts or steel screws, dash fasteners, rowel plug for fixing of screws in wall or floor etc complete all as specified and as directed.

M&L for 10-12 mm thick 1st class soft wood Australian wooden wall paneling including fillets & cornices, fasterners and all other accessories over 6 mm thick BWR plywood fixed over necessary timber scantling and frame work including two coat of varnishing, french polishing and preparation complete all as specified and directed. Note:- Cost for dismantling old panelling/boarding of any description and disconnecting of electrical boards, DBs, switches or any other electrical appliances etc and installation after completion of work is includinguded in this item rate.

S&F in repair 25mm outer Dia 3-layer PP-R polyproxylene random copolymer)concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supplyincluding all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. including taking up or down steel tubing of 15mm dia and connections complete all as specified and directed.

S&F in repair 32mm outer Dia 3-layer PP-R polyproxylene random copolymer)concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supplyincluding all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.including taking up or down steel tubing of 20mm dia and connections, complete all as specified and directed.

S&F PP-R Gate valves (brass insert) 25mm outer Dia as per requirement of the site complete all as specified and directed.

S&F PP-R Gate valves (brass insert) 32mm outer Dia as per requirement of the site complete all as specified and directed.

S & F Hollow PVC Wall lining /panelling on walls and ceilings consisting of 5mm thick plain colour PVC sheetincluding all PVC sheet fillet of width 20mm 'L' & 'U' for wall paneling includingusive of fixing on to wall/ceiling with suitable frame work including dismantling of old wall panels complete all as specified and directed.

S&F 12 mm thick Gypsum ceiling boards including Anodised aluminium snap grid frame work for false ceiling and dismantling of old ceiling of any description / thickness complete all as specified and directed.

S&F rotational moulded polythylene water storage tank 1000 ltr capacity of three layer (Cylindrical vertical with closed top or any other shape as ordered) hoisted and fixed in position including tank connection nipple, float valve 25 mm dia, all other accessory & dismantling of old water tank complete all as specified.

S&F Rotational moulded polye thylene water storage tanks 500 ltr capacity three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling old tank all as specified.

S&F in repair 2nd class hardwood Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 Type D-2 (using 40mm graded stone aggregate) as in sub base over rammed earth complete all as specified and as directed.

M&L for rubber moulded Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over 50mm thick sand cushioning complete all as specified and as directed.

M&L for rubber moulded Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigment laid over 50mm thick sand cushioning complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments over 20mm thick screed bed or bedding layer in cement mortor (1:6) set , jointed and pointed in neat cement slurry complete all as specified and directed.

M&L PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in copings and the likes complete all as specified and directed.

M&L for removal of misplaced/ not-in-level interlocking tiles of any size/shape in pathway & replacing the same in proper levelincluding 25 mm thick sand cushioning bed complete all as specified and directed.

M&L for preparing of new surfaces of cornices, pillasters, kerb stone and applying applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing of old treated surfaces of cornices, pillasters, kerb stone by brooming down with steel wire brushing scrapping down smoke soot, moulds Moss and efflorescent salts and treating oily and greasy spots etc and applying applying two coat of synthetic enamel paint complete all as specified and directed.

Demolition of stone/ boulders masonery built in cement/ cement lime mortarincluding all quions, arches, pillars etc but excluding ashler facing ,dressed stone work and pre-cast concrete articles and removing mortar from and cleaning stones/ bricks obtained from masonry of any description, complete all as specified and directed.

M&L for walling of random rubble , uncoursed well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed.

M&L for walling of random rubble , uncoursed well bonded, bedded and solidly hearted built in CM 1:4 but except stone complete all as specified and directed.

M&L PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as in bond stone set in CM 1:4 complete all as specified and directed.

Extra over stone walling for hammer dressing to face of stone and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto course with maximum depressionon face from straight edge held against the dressed surface n exc 20mm on granite or trap stone complete all as specified and directed.

M&L keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:3 complete all as specified and directed.

Supply only PVC (SWR) conduit pipes 100mm dia in any length with rubble ring joints laid in trenches or in floor or as in weep holes complete all as specified and directed.

M&L for boulder filling dry hand packed tightly, as in back fliing of stone masonry complete all a specified and directed.

M&L Second class hard-wood in work including dismantling timber scantlings any desc & in any position in unframed work complete all as specified and directed.

S&F 35mm x 10mm laths (fixed straight or diagonally) of 2nd class soft wood clean sawn two way trellies work with 50mm spaces in clear,including 75mmx50mm fillet (notched to take ends of leths) all around and fixed including dismantling of trellis work (jafri),complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F for framed brackets of angles or tees with web and flanges, tubular pipes cut to shape,drilled and countersunk for screw,including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repair 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L type or J type or cranked hook and washer in wall complete all as specified and directed.

S&F in repair 2mm thick fibre glass reinforced translucent plane sheeting with patterns / designs as directed by EIC & 100mm side lap fixed with L type or J type or cranked hook and washer in wall complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section,including taking out concrete embedded portion and making good disturbed ground surfaces complete all as specified and directed.

Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M & L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in post/strut foundation complete all as specified and directed.

M&L for MS work conforming to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencingincluding cutting bending top to shape as directed drilling holes matching for barbed wire,including fillet on back side of fencing post and all necessary drilling work complete and all as specified and directed.

Dismantling fencing wire/ mesh of any description complete all as directed by Engr-in-Charge.

Supply only chain link fencing complete all as specified and directed.

Fixing only Chain link fencingincluding line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc.including provision of binding wire complete all as specified and directed.

S & F flat iron of size as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and boltsincluding making necessry holes complete all as specified and directed.

M & L Mild steel round bars 8mm dia horizontally woven in chain link fencing complete all as specified and directed.

S&F Mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed.

S & F Punched tape concertina coil fencing with concertina coil of 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165kg/sq. mm having weight 43.478 gm/metre including securing or tying at crossings with provision of galvanised mild steel wires, staples or pins etc including taking out old worn out concertina in any position and in any height complete all as specified and directed

S&F galvanized two strands, steel brabed wire 2.24mm dia barbed with 2mm dia barbes at 75mm spacings and straining and fixing to any type of standard railsincluding securing or taying at croses with and provision of galvanized mild steel wire. complete all as specified and directed.

Fixing only galvanized to strands, steel brabed wire 2.24mm dia barbed with 2mm dia barbes at 75mm spacings and straining and fixing to any type of standard railsincluding securing or taying at croses with and provision of galvanized mild steel wire complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed

M & L for Pavement quality concrete(PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5Mpa, aggregate gradation as per Table 3 of IRC 15 2017, coarse aggregate of clean , hard strong, dense non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width ,including curing and tining by Texturing cum Curing Machine complete all as specified and directed. Required surface texturing to be done as specified in Clause 10 1 14 and Tabl~ 9 of IRC' 15-2017 complete all as specified.

M & L for Forming 20 mm thick ( and depth of slab 200 mm ) expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' complete all as specified.

M & L for Forming Contraction ( Dummy ) joints 65mm deep x 10mm wide, filled with sealing compound Grade A. complete all as specified and directed.

M & L for preparing bituminous/ Concrete surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

M & L for Cement concrete Type B1 1:2:4 ( using 20mm graded aggregate) as in drains including demolition of concrete in any position any thickness and including formwork complete all as specified and directed.

Taking down steel doors ( weighing 250 to 350 kg each ) and refixing in same opening after adjusting by cutting / welding of hinges made of angle iron section with ball bearing of suitable size to suit the raising of floorsincluding refixing of runner channels embedded in ground and everthing reqd to complete the job all as specified and directed.

M/S RATHER CONSTRUCTION CO (BID ID -3465517)

M/S Tajamul Ah Buchh (BID ID -3465656)